Inno Square Bar Roof Rack for Naked Roofs - Black - Steel - Qty 2
Item # IN45GR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (298)
- Q & A (0)
- Videos (18)
- Photos
Inno Roof Rack - IN45GR
- Square Bars
- Crossbars
- 46 Inch Bar Space
- Black
- Inno
- 2 Bars
- Overhang
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 46" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
IN-B117 Inno Standard Square Steel Load Bars - 46" Long - Black
K363 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Inno Square Bar Roof Rack for Naked Roofs - Black - Steel - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Reviews
Inno Square Bar Roof Rack for Naked Roofs - Black - Steel - Qty 2 - IN45GR
Average Customer Rating: 4.7 out of 5 stars (298 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Dallas I01/27/2024
Volkswagen Golf
I was having trouble finding racks for an older VW golf, called cust service and they linked me with proper fitting racks, they came in the mail, and fit perfectly. Very stoked, etrailer for the win.
by: Kevin 01/06/2024
Ford Flex
These bars are excellent. I like the coating to protect whatever you're hauling. There is absolutely 0 flex with my kayak mounted, unlike the aluminum aero bars I upgraded from.
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Matthew 01/21/2024
Easy to install, great instructions, looks good, will use for bikes and kayaks, a welcome edition to our gas saver car
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: David 05/08/2024
Perfection!!!
by: Charles 05/10/2024
Perfect fit.
by: Hugh02/12/2024
Shipping took considerably longer than originally promised. Product quality & value I consider both to be good.
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: Randy05/23/2023
Missing Parts - I am missing two of the end-caps for the INB117. What is the deal with INNO quality control that it cannot get 4 of these in a box at the same time and tape it shut? I did a search on Google and apparently this a a known QC issue!
by: Sean D06/01/2019
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by: David08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: Daniel07/01/2023
Quick and responsive customer service! Thank you etrailer!
by: Daniel07/01/2023
Quick and responsive customer service! Thank you etrailer!
by: CP05/12/2023
Great roof rack. Easy to install and du rable!
by: Bob P.07/22/2016
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
25
1008
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Parts to Add Inno Square Crossbar Roof Rack to 2022 Toyota RAV4 with Flush RailsThank you for the info an the picture! You do have the flush rails on your 2022 Toyota RAV4 so that cutout right next to your hand in the photo will pop up and that's where your roof rack will be anchored to your vehicle. You can reuse your 46" square crossbars so altogether here are the parts for the complete roof rack: 46" Square Crossbars - # INB117 Feet for Square Crossbars - # INXP Custom Fit Kit - # IN33FR This setup will work great with the Kuat Grip Ski and Snowboard Carrier #...
view full answer...
- Kayas Carriers for Naked Roof of 2016 Scion iMSome of the kayak carriers we offer can be used without having to install a roof rack on the vehicle. This can save not only a substantial amount of money but also some of the car's roof weight-carrying capacity. Everything on the roof - kayaks, kayak carriers and a roof rack - all count against the car's roof weight capacity. If your two kayaks together happen to weigh close to the car's roof limit, then the light weight foam block carriers like # MPG152 could be your best option. I linked...
view full answer... - Best Economically Priced Roof Rack that Fits 2014 Nissan JukeThe Sportrack semi custom roof racks like the SR1010 that you have for your 2014 Nissan Juke unfortunately don't have a great reputation for fitting well which is why I try to avoid recommending them for people. We've found that they tried to make them too universal which means they don't really fit anything that well and it's hard to say which vehicles happen to fit better than others. If you wanted a custom fit rack for your vehicle that is still lower in price the best option is the...
view full answer... - Are Thule Square Bars Compatible With Inno Feet Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars # INFR, but if you have flush mounted rails you're going to need the Inno Feet for Square Crossbars # INXP with the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR.
view full answer... - Can Older Thule Square Crossbars be Used for Roof Rack on 2020 Honda CR-VI do have a solution for you to have a roof rack on your 2020 Honda CR-V, but since Thule came out with their new Evo setup a lot of the Thule foot packs, like your Traverse, and fit kits have been discontinued. If you have the flush rails on the roof of your CR-V then you can use the Inno feet and fit kit that comes with their square bar roof rack kit: 46" Square Crossbars - # INB117 Inno Feet - # INXP Fit Kit - # IN98FR If you have a naked roof then you'll need a whole new roof rack...
view full answer... - Roof Rack Recommendation for a 2001 Ford Escort 4-Door SedanYakima does not have a roof rack solution for a 2001 Ford Escort 4-door sedan, but Inno does. You can use the following parts to add a roof rack: Inno Square Load Bars, # INB117 Inno Roof Rack Support Feet, # INSUT Inno Roof Rack Fit Kit, # INK294
view full answer... - Square Bar Roof Rack that Fits 2018 Honda CR-V Naked RoofUnfortunately Thule totally changed their square bar roof racks and none of the older components can be used with the newer ones. So while I have a reasonable solution there isn't a way to reuse your older Thule square bars on your 2018 Honda CR-V. The best option would be the Inno Square Bar Roof Rack part numbers # INB117, # INXP, and IN98FR which is very similar and also the best priced option out there for your vehicle.
view full answer... - Roof Rack And Canoe Carrier For A 2005 Subaru Legacy Outback WagonFor your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars # INB117, with the feet # INTR, and the fit kit # INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point for a canoe carrier. For a canoe carrier, the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD is an excellent choice that will work with the mentioned Inno crossbars # INB117, and has a weight capacity of 165lbs, so it will be...
view full answer... - Are Inno Square Roof Rack Bars the Same Dimensions as Thule CrossbarsThe Inno crossbars of the roof rack you mentioned part numbers # INB117 and # INFR match the same dimensions as Thule crossbars at 1-1/4 inches wide and 7/8 inches tall. This rack will work with your Thule roof bike racks that are designed to fit square crossbars.
view full answer... - Roof Top Cargo Basket to Fit 2013 Subaru Outback WagonMany rooftop cargo baskets like the Curt # C18115 require crossbars on the vehicle roof and in the case of this particular basket these bars must be spaced at one of three specific distances and not exceed 3-inches in width or 1-5/8-inches in height. There are also cargo baskets from other companies like Surco that can mount directly to factory side rails on some cars but on your 2013 Subaru Outback Wagon none of their products are a fit. I confirmed with my contact at Surco. I also checked...
view full answer... - Does the Inno SquareBar Roof Rack # INB117, # INXP, and # IN33FR Fit My 2021 Toyota RAV4?From the parts you listed, it sounds like you have flush rails on your 2021 Toyota RAV4. If this is what you have, then yes! The # INB117, # INXP, and # IN33FR are confirmed to fit your vehicle.
view full answer... - 2005 Lexus IS 300 Sportcross Square Bar Roof Rack RecommendationTo install a square-bar roof rack on your 2005 Lexus IS 300 Sportcross you need to go with an Inno rack as Rhino-Rack doesn't have a fit for your specific vehicle. For the Inno alternative you need the following: 46" Square Crossbars - # INB117 Feet - # INSUT Fit Kit - # INK251 This gives you a nice roof rack system that installs via clamps in your door jambs. I have linked the installation instructions for you to check out. If you let me know what you plan on using this roof rack for...
view full answer... - Can Current Thule TH460 Podium Roof Rack Towers Be Used With Older Square Bars on 2009 Honda CR-VUnfortunately, the new # TH460R Podium Roof Rack Towers aren't compatible with the older Thule square load bars with the slot on the underside and I'm sorry to say there isn't an adapter available. The good news is that there is a less-expensive option than going with a Thule Rack. Inno offers an economical square bar roof rack that would utilize the fixed attachment points on the roof of your CR-V. You could assemble a rack using the following parts: Inno 46 Inch Square Crossbars, part...
view full answer... - Inno Roof Rack Recommendation for 2007 Subaru ForesterFor your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
view full answer... - How to Transport 5 Bikes on 2008 VW Passat Wagon with Class I Trailer HitchYou are correct that a light-duty 1-1/4-inch Class I hitch like # C11096 has a 200-lb tongue weight (TW) capacity. However, when it comes to bike racks there is another factor that comes into play, leverage on the hitch tube. The more bikes the rack holds the longer it tends to be, naturally. This increased distance from the hitch to the outermost bike translates into extreme leverage forces on the hitch tube, forces that would damage a light-duty Class I hitch. For this reason all Class...
view full answer... - How To Carry 4 Bikes On A 2008 Mazda 5I do have a couple options for you but Class I hitches like the Draw-Tite Class I Sport Frame part # 24773 that fits the 2008 Mazda 5 are designed to only carry 2 bikes because of it's limited tongue weight rating. The weight of the bikes and bike rack is all considered tongue weight on the hitch and putting 4 bikes on a rack in a Class I hitch would create too much leverage and possibly damage the hitch or vehicle. With that being said, I recommend to get a 2 bike rack for the Class I...
view full answer...
- Recommended Roof Rack To Haul Kayaks On A 2019 Toyota Rav4For your 2019 Toyota RAV4 with factory flush rails I would go with Inno Square Crossbars as this will be the most affordable option. The complete kit that you need is Inno Square Bars # INB117, Feet # INXP, and Fit Kit # IN33FR. This system will attach to the flush rails and provide the necessary crossbars for the Malone SeaWing # MPG113MD and Malone DownLoader # MPG114MD to attach to. I attached a demonstration video for you to check out regarding this roof rack system.
view full answer... - SportRack Semi-Custom Roof Rack for Naked Roofs # SR1005 Compatibility With 2005 PontiacThe SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 45-1/2" Long # SR1005 is unfortunately not a fit for a 2005 Pontiac. However, I do have a solution for you if you have a 2005 Sunfire. The Inno with short roof adapter kit system # INB117, # INSUT, # INJK, # INK153 is a confirmed fit for your 2005 Sunfire. What's neat about this rack is that it includes all the locks already and has a square bar design which is the most compatible with aftermarket accessories. If...
view full answer... - Feet and Fit Kit for Older Thule Square Bars to Fit 2022 Toyota RAV4 Flush RailsWe have found that the Inno square bars have the same dimensions as the older Thule square bars that don't mount using a short channel on the underside of the bar. The Inno roof rack kit for the flush rails on your 2022 Toyota RAV4 include the following: 46" Square Bars - # INB117 Feet - # INXP Fit Kit - # IN33FR If your Thule bars are at least as wide as your flush rails are apart then you just need the Inno feet and fit kit, otherwise you'll want the 46" bars as well so you know they...
view full answer... - Roof Rack and Tie Downs to Carry Lumber on a 2014 Nissan JukeWhat I recommend is to add some load stops to the roof rack crossbars so that you can support the load side to side and use straps to secure the lumber front to back and tie off to the load stops. First you will need a roof rack for your 2014 Nissan Juke. The most cost effective roof rack that is a true custom fit is from Inno using square bars # INB117, feet # INSUT, and fit kit # INK399. Then for load stops I recommend # TH503 because they are designed to fit Tule square bars which...
view full answer... - Recommended Roof Rack For 1997 Buick CenturyThe roof rack I recommend for your 1997 Century is the Inno Square Bar Roof Rack. This roof rack comes with a custom fit kit that is designed to fit the contour of your door jambs. With the foot pack and crossbars you will have a nice roof rack that will work well for you. You can put the roof rack on and take it off the vehicle any time you wish, as it is not a permanent installation. To order this roof rack you will need part # INB117, part # INSUT, and part # INK214. To help cut...
view full answer... - Bike Rack Recommendation for a 2007 Chevrolet EquinoxThere are three different bike rack options that you can choose from for your 2007 Chevrolet Equinox. Your options are a trunk mount bike rack, a roof mount bike rack or a hitch mount bike rack. The best option is a hitch mount bike rack because they are much easy to setup and use and they have no contact with the vehicle limiting the potential for paint scratches. These bike racks do require a trailer hitch. The most popular hitch mount bike rack among our Equinox customers is the Swagman...
view full answer... - Solution For Carrying 3 Bikes On A 2016 Mazda CX-5 With 1-1/4" Hitch ReceiverWhen using a 1-1/4" trailer hitch receiver, you are limited to 2 bikes and cannot carry 3 bikes; this is because class 1 receivers are not designed to hold that much weight. For a 2-bike carrier you could go with the Saris SuperClamp EX Bike Rack 1-1/4" and 2" Hitches # SA4025F. This has a weight capacity of 60lbs per bike. Then if you have a 3rd bike that you need to carry you can add a roof-mounted bike rack such as Swagman Upright Bike Rack # S64720. For this you will need a roof rack...
view full answer... - Recommended Roof Rack for 2001 Honda Civic 4-Door SedanFor your 2001 Honda Civic, I highly recommend the Rhino Rack Aero Bar Roof Rack, which consists of Fit Kit # INK190, Feet # INSUT and Crossbars # INB117. I like this rack because it is a more economical option than others that will more than get the job done.
view full answer... - Parts Needed to Install Older Thule Square Crossbars on 2019 Chevy VoltSince the Inno crossbars are the same dimensions as the older Thule crossbars like what you have you can use the Inno feet # INSUT and Inno fit kit part # INK688 to install your current Thule bars on your roof.
view full answer... - Fit of the Inno Square Crossbars On A 2020 Chevrolet TraverseYes, the Inno Square Crossbars # INB147 with the Inno Feet for Square Crossbars # INSUT and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # IN63FR will work great with your 2020 Chevrolet Traverse LS. These crossbars measure 58" long x 7/8" tall x 1-1/4" wide and has a weight capacity of 220-lbs.
view full answer... - What Roof Rack is Compatible with My 2015 Toyota Camry's Bare Roof?For a great economic option that will securely fasten to your bare roof of your 2015 Toyota Camry LE, I suggest the following parts: - Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK872 With this roof rack system, you can leave the crossbars on after installation even when they are not in use. However, I recommend removing the...
view full answer... - Roof Rack Recommendations for the Thule Hullavator # TH898 on a 2010 Toyota FJ Cruiser w/Bare RoofThe absolute best option to mount a Thule Hullavator # TH898 onto your 2010 Toyota FJ Cruiser is by using Inno Square Crossbars. The length of the Inno Square crossbars you need depends on the measurement between the top of your driver's-side door surface to the top of your passenger's-side door surface. This is where the Inno Feet # INSUT mount onto your roof to hold up the crossbars. For example, for the Inno Square 50" Crossbars # INB127 to be the correct size for the Hullavator to...
view full answer...
- How Can I Fit Thule Square Crossbars on My 2015 Toyota Prius Hatchback with a Bare Roof? You are correct that Thule discontinued the Traverse Foot Pack 480. However, it is unclear from your question if you also meant that you had older square Thule crossbars. If you have older Thule square crossbars that do not have a channel opening in them, there is a solution for your 2015 Toyota Prius. That includes the following setup: - Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK865 Since the...
view full answer... - What Roof Rack do You Recommend for My 2013 Toyota Prius with a Naked Roof?For your question, I am assuming you are looking for a roof rack setup on your 2013 Toyota Prius with a naked roof. For a great recommendation that will give you the highest weight capacity for your roof, I suggest the following parts: - Inno Square Crossbars - Steel - Black - 50" # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK865 With this setup, you will get up to 140 pounds of maximum...
view full answer... - Kayas Carriers for Naked Roof of 2016 Scion iMSome of the kayak carriers we offer can be used without having to install a roof rack on the vehicle. This can save not only a substantial amount of money but also some of the car's roof weight-carrying capacity. Everything on the roof - kayaks, kayak carriers and a roof rack - all count against the car's roof weight capacity. If your two kayaks together happen to weigh close to the car's roof limit, then the light weight foam block carriers like # MPG152 could be your best option. I linked...
view full answer... - Mixing The Old With The New On My 2010 Toyota Prius With Thule And Inno Roof Rack PartsI can definitely find a solution that will work for your 2010 Toyota Prius. Unfortunately, it will not be a Thule roof rack. The Thule foot pack and fit kit for your Volkswagen Jetta are not compatible with the new Thule products. Our best solution would be using the Thule square crossbars with an Inno roof rack. The Inno roof rack you need will consist of the following: Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part # INSUT and Custom Fit Kit for Inno XS200, XS250,...
view full answer...
- Best Economically Priced Roof Rack that Fits 2014 Nissan JukeThe Sportrack semi custom roof racks like the SR1010 that you have for your 2014 Nissan Juke unfortunately don't have a great reputation for fitting well which is why I try to avoid recommending them for people. We've found that they tried to make them too universal which means they don't really fit anything that well and it's hard to say which vehicles happen to fit better than others. If you wanted a custom fit rack for your vehicle that is still lower in price the best option is the...
view full answer... - Parts Needed to Install Inno Square Bar Roof Rack on 2018 Ford EdgeTo install an Inno square bar roof rack on your 2018 Ford Edge you simply need part numbers # INB137, # INSUT, and # INK676.
view full answer... - Roof Rack that Fits 2007 Honda FitYes we have roof racks that fit your 2007 Honda Fit like the Inno Square Bar part numbers # INB127, # INSUT, and # INK219. I also attached a link that has all of the roof racks we offer for your vehicle as well.
view full answer... - How to Mount Old Thule Square Bars to 2020 Toyota CamryThanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
view full answer...
- What Roof Rack do You Recommend for My 2018 Chevy Volt?I have a roof rack solution for you. Unfortunately, it looks like Rhino-Rack not only discontinued your 2500 series roof rack for your 2012 Chevy Volt, but they also do not make any roof rack models that fit a 2018 Chevy Volt. With that being said, the only alternative is to purchase a new roof rack. For that route, I recommend the following parts for your 2018 Volt: - Inno Square Crossbars - Steel - Black - 50" Long # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT -...
view full answer... - What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare RoofFor your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars # INSUT. Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and the correct kit for your '19 CX-5 is the Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497.
view full answer... - Recommendation Roof Rack For 2014 Ford Fusion with Naked RoofWith a naked roof, I recommend looking at the Yakima roof rack system that is a custom fit for your 2014 Ford Fusion. This system includes: Round CoreBar Crossbars, Item # Y00409 BaseLine Towers, Item # Y28TR RoundBar Adapter, Item # Y03536 Base Clips and Pads, Item # Y06110 & Item # Y06102 If you want securely lock the roof rack then you will need Yakima Same Key System locking cores, Item # Y07204. For a more economical option, I recommend the Inno Roof Rack system. This system...
view full answer... - Roof Rack Recommendation for a 2001 Ford Escort 4-Door SedanYakima does not have a roof rack solution for a 2001 Ford Escort 4-door sedan, but Inno does. You can use the following parts to add a roof rack: Inno Square Load Bars, # INB117 Inno Roof Rack Support Feet, # INSUT Inno Roof Rack Fit Kit, # INK294
view full answer... - Roof Rack Fit for 2018 Subaru LegacyWe do have several roof rack fits for your 2018 Subaru Legacy, but the crossbar you mentioned is a fit for a 2016 Chevy Spark. For your Legacy, the most economical option we offer would be square crossbar rack from Inno, which would consist of the following parts: Square profile 54 inch long crossbars, part # INB137 Roof Rack Feet, part # INSUT Vehicle Specific Fit Kit, part # INK439 The downside to square bar roof racks is that they're not very aerodynamic, so they can be pretty noisy....
view full answer... - Will Inno Square Bar Roof Rack Fit 2015 Honda Fit and Work Well to Carry 2 KayaksThe Inno Square Bar Roof Rack # INB127, # INSUT, # INK876 that you referenced is confirmed to fit your 2015 Honda Fit. This roof rack uses custom fit pads and clamps to provide a secure fit for the roof rack on the naked roof of your Fit. The clamps are designed specifically to fit the curves of your vehicle's doorjambs. The molded pads that install on the bottom of the roof rack feet help to protect your roof from scratches and abrasions. Anytime an accessory installs with direct contact...
view full answer... - Parts Needed to Install Inno Square Crossbar Roof Rack on 2020 Honda FitThe parts needed to install an Inno square bar roof rack on your 2020 Honda Fit are part # INB127, # INSUT, and # INK876. Since you have the feet and bars already the only part you should need is the # INK876.
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 to attach Rola Cargo Basket # 59504An Inno rack for your 2016 Mazda CX-5 would work great to carry the Rola cargo basket part # 59504 that you referenced. For that you'd want the part number # INB127 and # INFR for if you have raised side rails or the part # INB127, # INSUT, and # INK758 for if you have a naked roof. I really like the Inno roof racks as they provide a higher quality roof rack at a better price.
view full answer... - Rooftop Cargo Basket for 2005 Toyota Tundra Double Cab With Inno Square Bar Roof RackWe do have a rooftop cargo basket for your 2005 Toyota Tundra Double Cab that will work with the square bar roof rack from Inno, which consists of the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK532 What you will need is a rooftop cargo basket and rooftop cargo bag, which you can combine to give you the same amount of carrying capacity as a rooftop cargo box. The best option is from Yakima: - Yakima LoadWarrior Roof Rack...
view full answer... - How to Fit Older Thule Square Crossbars on a 2017 Ford F-150I have an alternative solution for you to use your older Thule square crossbars on your 2017 Ford F-150, but there unfortunately aren't any fit kits that will work with the Thule 480 you need for your square bars. The fit kit 1689 is discontinued and was for a Lexus GS-Series vehicle as well so even if you were able to find it as a resale shop it wouldn't fit your F-150. Instead I recommend picking up the Inno Feet # INSUT and Fit Kit # INK139. This sounds a little weird but we've found...
view full answer... - Weight Capacity of Inno Square Crossbars on a 2015 Honda Fit The weight capacity, dynamic or static, of any set of crossbars is limited by the lowest part of the system, usually the roof of the vehicle. You will want to verify the weight capacity of your roof in your owner's manual prior to loading the Inno Crossbars, part # INB127 with part # INSUT. According to my research, the roof is only rated to 100lbs. Your total load, including cargo, crossbars and foot pack all together, will need to be less than this capacity, even though the roof system...
view full answer... - Will the Thule Stacker Work with the Inno Square CrossbarsYes, the Inno Square Crossbar System part # INB147, part # INSUT, and part # INK263 which is a fit for your 2011 Ford Flex will work with the Thule Stacker part # TH830. This option will allow you to carry multiple kayaks on the roof of your vehicle. The roof racks comes with locks for security and the carrier comes with tie-downs. I have attached a review video on each of these items for you. Please note that the weight of the roof rack, stacker, and water sport accessories will need...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Updated by:
Alex H
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.