Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver
Item # MPG216
Retail:$209.95
Our Price: $188.95
You Save: $21.00
Confirmed to Fit
2023 Toyota Sienna
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1298)
- Q & A (0)
- Photos
2023 Toyota Sienna - Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver
- Complete Roof Systems
- Aero Bars
- Malone
- Silver
- Overhang
This quiet, aerodynamic roof rack mounts to your Toyota Sienna with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.
Features:
- Aero-style roof rack lets you mount accessories on your vehicle with raised, factory side rails
- Aerodynamic shape creates a quiet roof rack system
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Rubber strips in T-slots reduce drag and wind noise
- Safe and easy installation - rubber-coated steel clamps fit tightly around side rails
- Locking tower covers secure roof rack to side rails
- Lightweight, aluminum crossbars are rustproof
- Plastic endcaps help keep water and debris out of bars
- Durable nylon towers are weather resistant
- Complete system includes 4 towers, 2 crossbars, installation tool and keys
Specs:
- Rack weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Minimum crossbar spread: 24"
- Crossbar dimensions: 58" long x 3" wide x 1" tall
- T-slot dimensions: 13/16" wide x 1/4" tall
- T-slot top opening: 7/16"
- Underbar slot: Full length
- Weight: 13 lbs
- Limited lifetime warranty
The Malone AirFlow2 roof rack lets you carry gear and accessories on the roof of your vehicle with raised, factory side rails. This complete roof rack system includes 2 aluminum, aerodynamic crossbars and 4 towers. The full-length crossbars extend past the towers to give you more mounting space for carriers, and the towers have built-in locks to protect the rack from theft. The rack clamps onto your raised side rails and tightens down with the included tool, so it's easy to remove and install.
Aerodynamic Shape
The AirFlow2's Aerodynamic shape helps control air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This decreases the need to add a fairing to your roof rack. The aero-style bar also reduces drag and helps maintain fuel efficiency.
Lightweight, Aluminum Crossbars
The silver crossbars are made of aluminum, which makes them strong, lightweight, and resistant to corrosion. The bars also have plastic endcaps to protect the interiors from the elements and to give your roof rack a finished look.
Durable Towers with Built-In Security
The towers are made of molded nylon that won't fade or wear down when exposed to the elements. Each tower includes a nylon cover with a built-in lock to deter would-be thieves from removing the rack from your roof. The covers also protect the towers' interior and hardware from the elements.
Easy Installation with Rubber-Coated Steel Clamps
The towers attach to your vehicle's raised, factory side rails with rubber-coated steel clamps. The rubber coating provides a superior grip on your side rails and protects them from damage during installation and use.
To tighten, simply turn the bolt inside the tower assembly with the included installation tool until the clamps are snug. Once assembled, the towers and crossbars stay together as one unit, which makes removing, storing, and reinstalling the system a snap. To remove, simply remove the cover and loosen the bolts inside the towers with the installation tool.
Channel and Clamp-On Accessories
These crossbars have built-in top channels with strips that allow you to carry channel-mounted accessories on your roof. You can remove, trim, and re-insert the strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet.
Maximum Cargo Carrying Capacity
The AirFlow2 includes full-length crossbars that extend past the towers. The increased length gives you more space to mount accessories and carriers to your roof rack. The bars are compatible with most universal, clamp-on accessories and carriers.
MPG216 Malone Air Flow 2 Universal Roof Rack for Elevated, Factory Side Rails - Aero Style Load Bars - Silver - 58" Long
Installation Details
California residents: click here
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver - MPG216
Average Customer Rating: 4.6 out of 5 stars (1298 Customer Reviews)
This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.by: Jake05/09/2023
I have had these for about a year now and they work great. I have a set of Malone fold away kayak racks that I use on them. I am quite happy with both Malone products.
by: Jonathan12/27/2022
2020 Subaru Ascent
Love this set of cross bars-use them for kayaks and to hold my rooftop tent without any worries.also put my Thule xl car top carrier on with out any
Jonathan
12/28/2023
Still holding up with no issues.been on thru out the hot summer and multiple trips thru the car wash.would highly recommend
by: Jaclyn04/29/2023
Beware anyone with a Gen 5 Outback. Doesn’t fit on Subaru Outback 2016. Was assured it was a fit for my vehicle on the website and I even emailed eTrailer to make sure. Got a response from an associate “yes, these will fit.” Now I have to pay $34 shipping to return.
The tower clamps fit around factory crossbars when they are swung closed but due to the factory raised plastic rails the Malone crossbars can only fit towards the middle of the roof and would only be spaced 15in apart. Useless.
Seems like a good product, but etrailer should not list these bars as a fit for this vehicle.
Jenny N.
5/12/2023
The Subaru Outbacks will limit the cross bar to less than 24 inches. This will limit what can be carried as any crossbar spread under 24 inches should not be used to carry kayaks, ladders or other long items.
by: David06/28/2023
2019 GMC Acadia
These work really well. After shopping around a bit, these were the best value (price) without being of poor quality. They're really well built, strong, and fit my 2019 GMC Acadia SLT(2) nicely. I opted for the 58" version with the idea that I could haul (2) 15' Kayaks. The boats go on very nicely and the extra width helps me keep them off the vehicle. I also purchased a decent T-Slot ski carrier that had great reviews and hauled 6 pairs to VT last winter from MD. The extra length may not appeal to some. If so, get the smaller version. I believe in Function. So the 58's are right by me. Reviews I read on these complained about the end caps getting lost, coming off, etc. I could see that happening. When I installed them, I ran two passes of electrical tape on the end caps to secure them. I replace it every time I open the end caps - switching from ski to kayak season. These bars have remained tight to the vehicle after 1 year. They show little signs of wear too. I'm a "spirited" driver. They've hung on very well. There is some road noise from them. But I also enjoy music - so that doesn't bother me in the least. Take your time installing and gently tighten as you go. I think that is a big part of the installation. Overall - excellent product, priced incredibly well against the big names, accepts T-Slot accessories, and more. I'm happy. Good luck!
by: Karlton03/11/2024
I have ordered several products from etrailer and been happy with them all. One of the plastic endcap was broken on this one and they sent me four additional endcaps free of charge. The customer service is spot on.!! Thanks, Alex!
by: Spencer07/21/2023
These were exactly what I was looking for, they have been able to handle my needs with no issues at all. They have support two kayaks and my fishing poles with ease and I love the way they look. Great investment.
by: Marco 01/30/2023
2019 Subaru Forester
I just received the 58" Aero crossbars from these guys for my Subaru forester they fit great and although I haven't loaded them yet, I know they will work perfect!
Marco
2/1/2024
They are working out great for me, Ive carried 250lbs. of steelover the side rails!
by: Paul01/04/2024
Subaru Forester
These are great racks at a great price. They fit perfectly on my 2023 Subaru Forester Wilderness. I routine carry multiple whitewater kayaks with them.
by: Michael10/18/2022
Very impressive hardware, instructions, and service at 1/2 to 1/3 the competition's cost. (Correction: there really IS no competition.) I tossed the rack onto my 2011 Honda Odyssey OEM roof rack without tightening anything to see how it all fits together, and was very pleased. I figured out how to fabricate a simple, elegant, low-profile, non-invasive, barely noticeable (it's my wife's minivan, after all) roller so I could easily slide my 12' kayak on top by myself. I planned exactly how to tie the kayak's nose and tail down securely without any mods to her van. I bought all the pieces and parts to do all the above, but before I got out my tools and mounted everything, I asked myself "Is there any way this kayak will fit securely inside the Honda with all the doors and windows closed?" The answer was, "Yes", so the rack is now gathering dust due to no fault of its own. It's inexpensive enough (try saying that about any of its "competition") that I'll keep it anyway in case I buy a longer kayak some day or need to mount the rack on some other vehicle.
When shopping for any related products now, I don't even look at any other brand or source. I now trust Malone and E-Trailer to provide the optimal combination of product, price, and service. I have no connection to Malone or ETrailer, and paid full price, but when a company or product performs this well, I want to help get the word out for everyone's benefit.
Michael
10/19/2023
Its been a year now, and Its still gathering dust because the kayak fits inside my wifes minivan. I fabricated a solid, simple, diagonal, low-effort, one-man mounting system on the back of my motor home, and the kayak fits inside my Outback with only a couple of feet sticking out of the partially opened tailgate. I got lucky no exhaust fumes get inside and the sound and heatcool systems work fine even on long highway trips in hot and cold weather. I dont feel I wasted my money, though, because this experience taught me three things: 1. eTrailer is great to work with. 2. Malones products are so exceptionally well designed, constructed, and priced that theyre the first brand I look at when buying anything in their line of products. 3. If I ever need to mount this rack on another vehicle, Im confident that Malone makes a solid mounting bracket to fit it.
by: Mike03/03/2024
2023 Toyota 4Runner
as described. fits well. installation instructions were OK, but I had to re-fit the crossbars to install the bottom weather/wind seal strips. too hard (cold temps) so i pre fit the bars, measured and cut the strips, and slid them in from an open end - same with the tracks outside the clamps on the overhangs. total install time about 2 hours. no discernable noise from wind.
by: Max 02/06/2024
Chevrolet Traverse
I bought these over a year ago, we use them on our 2022 chevy traverse. There were super simple to install, and unlike many of the other options for this car, they are low profile and very aesthetically pleasing. We frequently put a Thule Force XT XL box on there. Overall I could not recommend these crossbars enough.
by: Scott04/23/2023
2021 Subaru Outback Wagon
Another great purchase from eTrailer. I was looking at the 50" and noticed that it did not have a recommendation for my car. I checked further and found that the 58" had a recommendation. I'm glad that I followed this. It fit perfect. The 50" would have been just a half inch too short. They include a rubber strip to fill in the gap between the mounts on the bottom. Be sure and put this in place, even in the ends past the mounts. The purpose is to stop the wind noise, picture blowing across a soda bottle, you want to stop that at any frequency.
Installing was quite easy, I did it in about 30 minutes. Take your time, measure and all will fit perfect.
I will keep coming back to eTrailer.com, the rack was a perfect fit, as were all of my other purchases. Trailer hitch for a Outback another for this Ascent, trailer electrical for both cars. I'm impressed that for a relatively new model year, everything is a perfect fit. I've tried others without such clean results.
Now off to get some lumber.
by: Calvin04/27/2024
It worked great with my Chevrolet Traverse. I used a roof carrier on it and drove from coast to coast twice with no issues. There is a very tiny bit of whistling when really windy but not disturbing in any way.
by: Tim03/29/2024
2023 Chevrolet Traverse
This is a great tool. The only thing I would recommend to anyone is maybe find something to put between it and your door jamb on your vehicle to spread the weight out some more. I used mine and put a small dent in my door jamb. 6’3” 230lbs. Not a problem with the door step but just how thin the metal is on these new cars these days! Thanks
by: Eric09/05/2023
I've had these on my car for a year now. They are decent for the money and I think they look pretty good too. One very weak point is the plastic end caps. They snap on and are flimsy. I lost one in short order and broke another one sliding a sheet of plywood over it. It would not be hard for them to design a better cap that is fastened better to the rails. I 3D printed new ones that work great and installed with a screw.
by: Mickey 05/17/2024
2020 Ford Explorer
Appears to very sturdy. Get a little extra noise when sunroof is open, but not bad. Haven't taken it on the freeway yet for the noise. Pretty easy to install.
by: Michael 03/09/2024
2021 Ford F-150
Great looking, fully assembled racks that were easy to install. Works as hoped for with my accessories.
by: Harry 02/20/2024
Volvo XC90
Thanks for getting this to me! I needed to turn my beloved Volvo XC90 into a work truck van in the shop. Looks good and very sturdy.
by: Chad12/29/2022
2015 ToyotaSienna
Works great on my 2015 Toyota Sienna LE! Have used it with a Yakima CBX cargo box for a few road trips.
by: Andre02/09/2019
2016 Mercedes-Benz Metris
The 58" Malone MPG216 bars replaced a set of 58" Malone Steel bars. The new bars feel sturdier and a definitely quieter. The fit and finish is great, except for one bar end that doesn't fit as tightly as it should. I put my Yakima Skybox 21 on top of them and they did the job. My only complaint is that they already have a slight bend after being loaded with just 140 lbs. I expected a bend to occur later in the year since the top box stays on for 6 months out of the year, but not after just one road trip. But, there was no movement from the bars or the box at all during the 1600 mile trip. So far, so good.
Heather A.
2/25/2019
The Yakima skybox is about 70 lbs on its own. The weight capacity of the roof rack is 165 lbs. If you are putting 140 lbs worth of cargo in the box, plus the weight of the box itself on the bars that is 210 lbs. The bars will bend if they have 210 lbs of weight on them. Please make sure you are taking into account the weight of the box on the bars as well.
by: Frank 12/07/2023
A superb product in every way. Well-made and with concise instructions, this rail system allowed me to put a 25-year-old Thule box back into to service quickly, easily and securely. First rate!
by: Michael05/18/2018
2015 Nissan Pathfinder
-2015 Nissan Pathfinder.
-Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long.
This is my first ever roof rack so I am by far no expert. I researched many roof racks and I just couldn't see spending 500, 600, or over $700 on an accessory. The installation is not nearly as easy as some would think, in my opinion. However, I am anal and meticulous about every detail. I put the roof rack rail on and got everything into place with measurements (width between them, how much they stick out, etc). Then I mark the underneath of the racks for the rubber to go so I could cut it precisely (you slide in the rubber...although I think some cramped the rails down and then stuffed the rubber in).
Pros:
-Look at my vehicle...I think they look amazing...especially for the price.
-Everything is very firm and doesn't move after proper installation.
-Matches chrome on car and current cross bars
Cons:
-End caps are cheaply made, but I didn't have any problem getting them to snap in. Get a higher grade plastic or something
-Directions that were provided were sparse and you kind of have to figure it out on your own, which wasn't too difficult.
-THE NOISE is my biggest complaint. It's not terrible but enough to annoy me. These are advertised as "Airflow2" so come on. And I'm no aerodynamics professor but shouldn't the more narrow end be pointed toward the wind, not the fat end? Maybe a moonroof visor would help the noise...I don't know.
3.5 - 4 out of 5 because of the noise and because of the cutting and cheap end caps. But for the money, I think they're worth it. Good luck to your purchase and installation...it's not too bad. :)
Mike L.
5/19/2018
Unfortunately, any time a piece of equipment is installed on a vehicle roof, there is going to be wind noise, its unavoidable. Airfoil-shaped crossbars like those on the Malone rack you purchased are actually much more quiet than the older square or round-profiled crossbars. The crossbars are indeed meant to be installed so that the thicker end is pointed forward to the wind, just like an aircraft wing. To keep the wind noise to a minimum, its important that the entire length of the slots in the underside of the crossbar are filled with the provided rubber strips .
by: Wesley04/18/2022
etrailer was great to work with. They are very responsive with emails and following up with tracking. I was little disappointed with the average ship time. It was almost like the product didn't get out the door until a week later, but I did get the product in working condition. As for the product quality the only complaint I had was the procedure/instructions for installing. I would totally recommend putting the rubber trim piece in the bottom of the rail during the first part of installation. Don't be afraid to slide that piece in the rail and cut it to size once it hits the end of the rail where it touches the mount. Its easy to cut and this piece is crucial to making the rails very quiet. I installed the first time without it and the wife hated me for installing these. We both looked at each other during the first drive test and said that whistle noise has to go! After installing the trim in the rail these rails were perfect for what I needed. It just needed a better instruction for installing it to top quality. I also recommend you put the trim in the first time because those side black pieces are plastic and they take a special kind of push in on the clip and pull to remove without breaking the clip. I broke my first clip but after that I was able to remove the other successfully. So because of the poor instructions and the removal of the rail to finish installing correctly I am now looking for a plastic end for one of my rails. Overall pretty good and durable. I also wish the instructions explained that when you tighten the mount that it also tightens on the rail too. Maybe I needed to watch a couple more videos about installing these before doing it.
Jenny N.
4/25/2022
I will have our Customer Service team reach out to you. I recommend watching the video installation that we have on a 2013 Ford Explorer. The end caps are available as a separate part. They are part # MPG1012
by: Joseph11/02/2021
Okay, etrailer seems to be okay so far.
Just installed the Malone airflow 2 and it took way to long. I had trouble getting the boots on the rail system. After trying one side then the other, it still took a while to loosen or tighten, trying both ways till they finally went on.
Bottom line, I had to work with it to long to get them on the rail system, but after I did! It seems okay. I honestly am not wanting to go through the hassle of taking them off and putting them on over and over. Cutting the rubber inserts for the bottom for wind noise may make that experience okay if it keeps the boots from moving when taking the rails off.
Also thought I had one the book break on me but it’s technically not broke. Here is a picture.
Jenny N.
11/9/2021
Thank you for your feedback. I reached out to Malone and the roof rack should be easy to take on and off. I will have our customer service team reach out to you.
25
1297
Show More Reviews
See what our Experts say about this Malone Roof Rack
- Recommended Roof Carrier for Tandem KayakIn order to haul a tandem kayak you will need to do so with the hull down. The Yakima DeckHand Kayak Carrier part # Y04083-2 will be a great option for this as it's designed for larger, heavier kayaks up to 80 lbs. It will however require a 24" crossbar spread. It works with most aftermarket and factory crossbars. If you don't already have a roof rack, the Malone AirFlow2 Roof Rack part # MPG216 is a great option for models with raised side rails.
view full answer... - Can 2020 Honda Ridgeline Carry Kayak CarrierThere aren't any ladder racks that fit your 2020 Honda Ridgeline truck bed so best option would be a roof rack like the Malone part # MPG216 which is a fit for the raised roof rails on your truck roof. Or if instead you had a naked roof you'd want the Rhino Rack roof rack part numbers # RRVA150B-2, # RRRLKVA, # DK470. Then you could carry a kayak carrier like the etrailer # e98878.
view full answer... - Can I Install Different Crossbars On My 2018 Subaru Outback With Factory Roof Rack?The Thule WingBar Evo Crossbars - Aluminum - Black - 47" # TH711220 that you were looking at are for the 2018 Subaru Outback (non touring model) with flush roof rails running front to back on the roof. These crossbars require Podium Feet # TH460R and Fit Kit # THKIT4063 to install onto the flush rails. Since you have the factory roof rack, this likely will not work unless your roof has the fixed mounting points as seen in the attached demonstration video. If you have the factory raised...
view full answer... - Lowest Profile Roof Rack for 2011 Subaru Outback Wagon with Raised Side RailsThe lowest profile roof racks available are the flush bar style where the crossbar is between the feet that attach to the raised rails of your 2011 Outback instead of the racks that have the bar that attach to the top of the feet. So hte best option would be the Thule Wingbar Edge part numbers # TH96FE and # TH69SC that is a confirmed fit for your vehicle.
view full answer...
- Roof Rack Solution for 2015 Subaru Outback Wagon with Raised RailsSince the Thule square bars changed a few years there isn't a way to attach what you have to your 2015 Subaru Outback Wagon with raised roof rails. Only solution will be a new setup like the Malone roof rack part # MPG216 which is a higher quality aero bar roof rack that is priced really great and also easy to install.
view full answer... - Can I Put A Trailer Hitch On A 2018 Lexus 450H LAt this time we do not currently have a trailer hitch confirmed for your 2018 Lexus 450H L. If you were going to use the hitch for hauling bikes you could use The SeaSucker Hornet Rear Window Bike Rack for 1 Bike - Handlebar Mount - Vacuum Cup Mounted # 298-BH1302. The carrier installs in seconds with vacuum cups that won't scratch or dent your Lexus RX 450h L. Stores in your trunk or luggage when not in use. It has a weight capacity of 35 pounds, and has a pull strength of 120 pounds per...
view full answer... - What Crossbars and Fly Rod Carrier do You Recommend for My 2019 Chevy Traverse?When looking to mount a CRC fishing rod system to the Malone AirFlow2 Crossbars # MPG216 on your 2019 Chevy Traverse, it really depends on the mounting clamps on your CRC system. If you already own a CRC system, I recommend measuring the width and depth of your clamps to make sure they can wrap around the 3" wide x 1" tall crossbars of the Malone AirFlow2. With that being said, the AirFlow2 crossbars will work great with a compatible CRC setup on your vehicle. It is important to note, though,...
view full answer... - Recommended Roof Rack Setup For Carrying A Tent On A 2013 Subaru Outback WagonYes, I would be happy to assist you and I know exactly what you need. The most economical setup that will also work for your vehicle is the Malone AirFlow 2 Aero Crossbars 58" # MPG216. This kit comes with everything you need and has a weight capacity of 165lbs. These bars also come with built-in locks.
view full answer... - Can The Thule Hullavator Fit Into The T-Slot Channel On The Malone Aero Crossbars?The Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 actually comes with the hardware necessary to fit into the T-slot channel on the Malone AirFlow 2 Aero Crossbars 58" # MPG216. You do not need anything else in order to do this.
view full answer... - How to Get Malone Kayak Carriers w/ T-slot Fit Kit to Slide Into the Channels of a Roof RackIn order to use your Malone DownLoader Kayak Carrier # MPG114MD with T-Slot Fit Kit # MPG8287 in the Malone AirFlow2 Roof Rack # MPG216 you will need to remove the rubber stripping (gasket) in the T-slot channel. You can remove, trim, and re-insert the strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. I have included a picture that shows what the channels will look like with the strip removed and the carrier with fit kit installed.
view full answer...
- Replacement Hardware To Mount Thule Hullavator Onto Malone Crossbar Top ChannelYou will need 8 of the Replacement Socket Head Cap Screw M6 x 30 # TH919063054 and 8 of the Replacement Square Nut # 853-7557. This will allow you to install the Thule Hullavator onto various crossbars with the T-slot channel, including the Malone # MPG216.
view full answer... - Will The Thule Hullavator Kayak Carrier Fit Onto The Malone AirFlow 2 Roof Rack 58"?The Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 is indeed compatible with the Malone AirFlow2 Roof Rack 58" # MPG216. To verify if it will work well on your 2021 Nissan Rogue you will need to measure the distance between your roof rails. If your measurement is 50" or less, then you are all set to install this setup as the Thule Hullavator requires at least 4" of crossbar overhang on each side of the roof rails. I attached a photo that illustrates the measurement you need...
view full answer...
- Roof Rack Recommendation for 2012 Honda OdysseyThe Thule # TH7503B-TH7504B AeroBlade Edge roof rack you'd looked at is an outstanding product that really looks as if it was installed at the factory, but since you won't be using your roof rack constantly, you might be a good candidate for a more budget-friendly option. The Malone AirFlow2, part # MPG216 would be a good quality, more reasonably priced option that is very highly rated by our customers. You can see a video showing the rack being installed on a newer-model Odyssey by using...
view full answer... - Will The SportRack Horizon Roof Cargo Box SR7011 Fit Roof Of 2019 Subaru Impreza Hatchback?The SportRack Horizon Rooftop Cargo Box - 11 cu ft # SR7011 is 21" wide, so since your side rails are 38" apart you won't have an issue fitting this between the rails. Also, crossbars will raise the box over the side rails which will allow for a wider box to be added. For a crossbar setup, I recommend going with the Malone AirFlow2 Roof Rack - Aero Crossbars 50" # MPG215 which is a very affordable option. These are low-profile aerodynamic crossbars that feature the common T-slot channel...
view full answer... - Which Roof Rack Should I Use To Install RoofNest Sparrow XL Tent On 2014 Subaru Forester?I talked to Roofnest's customer service team regarding this situation. They were very helpful and said that you can certainly install the Sparrow XL onto your 2014 Subaru Forester as long as the roof rack and vehicle's roof has a weight capacity of 165lbs or higher. The overhang of 5" won't be an issue according to Roofnest but they did say that they recommend at least 58" long crossbars to be on the safe side, but it is not required. If you want to go with longer crossbars then you can...
view full answer... - Appropriate Size of Roof Bars for a 2013 Cadillac SRXMalone tends to recommend their bars a little longer than normal, primarily because Malone deals a lot in watercraft carriers and they often require additional crossbar spread to use correctly and clear the sides. The 58 inch long Malone AirFlow2, part # MPG216 is sized the way it is so that it properly fits your roof rack spread. The installation instructions and recommended locations tend to put them well out of the way of anyone's heads while getting out of the vehicle. I've included...
view full answer... - Recommended Malone Roof Rack For A 2019 Subaru Ascent And 2022 Subaru Outback WildernessThe Malone # MPG215 is not a fit for your 2019 Subaru Ascent or 2022 Subaru Outback Wilderness, but the Malone AirFlow2 Roof Rack # MPG216 is a confirmed fit for both. The difference between these two is just the length of the crossbars. The correct size for your vehicle is the 58" crossbar instead of the 50". These roof racks are super easy to pop on and tighten down for a fast, tool-free installation. I've attached videos for both of your vehicles down below if you'd like to see how...
view full answer... - How to Carry Kayaks on a 2022 Honda Ridgeline with BAK Revolver X2 Tonneau CoverThanks for reaching out! To carry kayaks with the BAK Revolver X2 # BAK39602 installed on your 2022 Honda Ridgeline you'll actually need to install a roof rack as there aren't any ladder racks that fit your vehicle. For raised rails you can use the Malone AirFlow2 # MPG216 but if you have a naked roof then I recommend checking out the Rhino-Rack Vortex crossbars: 59" Vortex Crossbars - # RRVA150B-2 2500 Series Legs # RRRLKVA Fit Kit - # DK470 Then if you're looking for a kayak carrier...
view full answer... - Power Retractable Tonneau Cover and Roof Rack for 2020 Honda RidgelineFor your 2020 Honda Ridgeline we have power retractable tonneau covers like the PowertraxONE MX Hard Tonneau Cover # RT70502 but we do not have any that have accessory tracks/ or channels that racks can attach to. Those types of tonneaus are really only available for larger trucks. If you needed a rack system best solution would be a roof rack like the Malone part # MPG216 that would fit the raised rails of your roof.
view full answer... - Budget Roof Rack Option for 2018 Volvo XC90 with Raised Side RailsThe best economically priced roof rack we have for your 2018 Volvo XC90 with raised roof rails is the Malone rack part # MPG216. This rack installs very easily, is a confirmed and tested fit for your vehicle, and comes with aero shaped crossbars so you'll have a quieter experience.
view full answer... - Length of Rola Sport REX Series Roof Rack 59685 and Alternative OptionThe Rola Sport REX Series Roof Rack for Factory Raised or Flush Side Rails - Silver # 59685 have a crossbar with a length of 60 inches, width of 3-1/8 inches, and height of 1 inch. You may want to also consider the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long # MPG216.
view full answer... - Roof Rack Recommendation for 2018 Subaru Outback WagonFor the value and quality you get it's hard to beat the Malone Air Flow roof rack that fits your 2018 Subaru Outback Wagon with the part # MPG216. With this rack you get a higher quality aero bar roof rack at a much better price than similar quality options.
view full answer... - Roof Rack and Roof Awning for 2016 Mercedes MetrisI have a solution for you but we don't have an awning that cat attach to the side rails of your 2016 Metris. Instead you'd need to install a set of crossbars confirmed to fit your vehicle like the Malone part # MPG216 so that you can use the Rhino Rack part # RR32132.
view full answer... - Roof Rack Recommendation for Factory Flush Rails of 2010 Jeep LibertyWe do sell roof rack kits that fit the factory flush mounted rails you have on the top of your 2010 Jeep Liberty. For a set of Malone crossbars confirmed as a fit similar to what you referenced you'd want the part # MPG216 which will work well.
view full answer...
Do you have a question about this Roof Rack?
Malone Accessories
Fit to this rack on your 2023 Toyota Sienna
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Test Fit:
Zack K
Test Fit:
Colin H
Test Fit:
Hayden R
Test Fit:
Brent H
Test Fit:
Ed W
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Adam E
Test Fit:
Clayton O
Test Fit:
Robert O
Test Fit:
Evangeline M
Test Fit:
Bradley B
Test Fit:
Matthew B
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Jacob H
Video by:
Thomas T
Video by:
Ethan H
Video by:
Cooper S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Carrie F
Edited by:
Daron K
Written by:
Jonathan S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jake
5/10/2024
I am two years out with Malone roof racks and they are holding up nicely. I did have to replace one of the end caps as it came off at some point. But the part was inexpensive and easy to find.