Can The Thule Hullavator Fit Into The T-Slot Channel On The Malone Aero Crossbars?

Question

Question:

Will the Malone MPG6604 t slot hardware kit with 1-7/16 inch bolts be correct for installation of the Thule Hullavator?

asked by: Berne

0

Expert Reply:

The Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 actually comes with the hardware necessary to fit into the T-slot channel on the Malone AirFlow 2 Aero Crossbars 58" # MPG216. You do not need anything else in order to do this.

expert reply by: Andrew N

0

Answer 1

From my understanding you should just need the M6 x 30 Socket Head Cap Screw #TH919063054, the M6 Washer #951061254, and the Square Nut #853-7557 for installing the older Hullavator into the T-Slot of a crossbar system. This stuff should have come…

view full answer...

Answer 2

For a full sized truck like your 2018 GMC Sierra 2500 short bed that has the RetraxOne XR tonneau part #RTT-80462 the Rhino Rack load bar setup part number #RRVA180B-RRRLT600 would be a great fit and matches what you are looking for. I attached a…

view full answer...

Answer 3

I am sorry if we provided you with bad info here. I believe we made some assumptions about the Malone roof rack that were not accurate. The Hullavator #TH898 is made to work with a square bar roof rack, but it has to be the Thule brand. As you can…

view full answer...

Answer 4

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 5

The antenna on your 2023 Subaru Crosstrek sits low enough that clearance for the Inno Shadow 16 Rooftop Cargo Box #INBRA1210BK won't be an issue! If you don't already have a roof rack just let me know if your Crosstrek has a bare roof or the…

view full answer...

Answer 6

Yes, the Malone AirFlow2 Roof Rack part #MPG215 and the Malone AirFlow2 Roof Rack part #MPG216 will both fit the raised factory side rails on your 2017 Subaru Forester. The only difference between them is length as you alluded to, 50" long vs…

view full answer...

Answer 7

Yes, the Malone Airflow 2 roof rack will indeed fit the factory installed rails on your 2021 Honda Odyssey. For a 65" bar you can do the #MAL24AR for black bars, or the #MPG217 for silver.

view full answer...

Answer 8

All of the roof top tents we carry require aftermarket crossbars like the Yakima Roof Top Tent part #Y07436 so for your 2016 Honda Odyssey that has a factory roof rack you would need to install a set of crossbars like the Malone AirFlow2 part…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Yes the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 that you referenced would fit the top of the HD bars or the Overhaul HD rack.

view full answer...

Answer 11

The Yakima HD Crossbars like part #Y01158 use standard dimension top channels so you can use channel mounted accessories from pretty much any brand such as Yakima, Thule, Rhino-Rack Etc. without issue. That said, the channel hardware will be specific…

view full answer...

Answer 12

The Thule Hullavator part #TH898 was designed to fit the top channels of crossbars like what your TracRac SR ladder rack has. As long as you recieved a complete rack you should have the needed hardware to install it into the top channels. Are you…

view full answer...

Can The Thule Hullavator Fit Into The T-Slot Channel On The Malone Aero Crossbars?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching