To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - 51" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today at our 2014 Toyota Corolla we are doing a test fit of the Inno Aero Bar Roof Rack. The Crossbar numbers are INXB100-2. The Flush Feet are INXS200. The custom fit pad and clamp are INK306. We have the first one already on, I'm going to show you how to install the second one. This is our crossbar, we have 1 and 1/2 of the feet already on.
This is the feet, the clamp, and the pad. This is the adapter for the crossbar to put on our feet. There we're 2 covers and the tools that actually come with the kit itself. The first thing we're going to do is put this adapter on. We need to bring this all the way out, and it has a little notch here that actually fits here, so bring it up like that and slide it back in. Now we take our foot, this little knob here is going to fit inside there, that one's going to fit there and the screw is going to eventually go into there.
Set it on there like so, pull it out . Take our Allen wrench here, this tightens up this bolt. Get that nice and tight. Then we put on our pad, as you can see it has the screws imprint on there so that's the way you want to put it on. Put that on like so.
Then we need to take our clamp and what we need to do is inaudible 00:01:52 all the way out . Set the nail like so. We are ready to put it on our vehicle. I'm going to set this out of the way for a second and open up our doors. Set it up there like so. Make sure this side is on there also.
Now I need to take a measurement after I get this one inaudible 00:03:25. Now the measurement will be 17 and 1/4 inch from the middle to here. Move it out just a little bit. That's pretty much there. Now we need to do the other side. We are pretty much there. We're going to go ahead and take our other tool, tighten it up, we can put on our covers and be on our way. The good thing about Inno Aero Bar Roof Rack here; the tool actually tightens itself so once you hear it click, you should be done. You don't want to go no more than when you hear the click because it'll be tightened enough. We're going to keep going, kinda switch to both sides, don't want one side to pull at the other. It's pretty much getting tight, so you should pretty soon hear (click) there's the click. As soon as you hear the click you don't want to go any further than that. Now we can put our covers on. Put the cover on there, go on the other side and finish that one up. Now the good thing about the Inno Aero Bar is you can find the other accessories on their web site such as bike racks, surf and paddle board carriers or even kayak carriers. We got them all locked up; we're ready to go. That's going to complete our look at the Inno Aero Bar Roof Rack on Today's 2014 Toyota Corolla.
Average Customer Rating: 4.8 out of 5 stars (121 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.Very nice quality, made in Japan. Easy to install using the Inno XS150 base stays. The 51" was a nice size for my 2015 Touareg. Many of the manufacturers recomment wider (53-54"), but I like the narrower profile. Unfortunately, the Aero design still creates a slight bit of wind noise at highway speeds, and it gets worse if the sunroof is raised (vent). I like the soft rubber T-channel material which allows the accessories to mount without cutting the material. I also like the slightly arched shape.
I just received and instilled my rack system. Time will tell, but my initial reaction is that of disappointment with the quality of the system, considering what I spent. The cross bars seem to be plastic, and the end caps on the cross bars seem to be plastic and covered with a faux metal chrome. I am curious to see how well this system holds up to the hot Florida sun. The positive is that I like the general shape of the aero crossbars, and they are relatively quiet when I am driving.
Sleek rack thanks to the etrailer consu ltants
Waste of money. Most annoying couple hours spent in a long time. Extremely disappointed. Does not fit well. Not exactly a cheap option, but a cheap option in terms of fit and engineering. The instructions online and in the kits do not agree. But there is no helping the design. Plus there are no universal set of instructions--they are all individual items for the fit kit, the bars, etc. But a reasonably inclined person can figure it out so no big deal, but the engineering design is garbage--requires precise measurement yet the design is such that exact measurement is impossible due to the design.
Additionally, the parts are low quality Either low density plastic or easily stripped bolts. Even when as precise as possible, I wouldn't trust it with my kayak. What a mistake. Do yourself a favor and get a Yakima trailer or similar. It isn't that much more money in the scheme of things and then it isn't tied to your car. Can add a hitch to most vehicles anyway.
Racks were perfect for my Acura MDX. They fit like a glove and I have used them several times.
Has worked great for transporting my fishing Kayak as well as small loads of lumber. It has worked fine for about a dozen and a half boards at a time or a couple of sheets of plywood. Just make sure that you have a good way to strap them down as well as maybe a rubber mat to help hold everything in place. The noise from it on the high way can be a lot but certainly not as bad as some that I have heard. I figure that anything on the outside of a vehicle like that will produce some noise.
worked as expected, I used them to carry my hobie outback kayak (about 100lbs) on my Honda Civic 2016 Coupe (2 doors). They worked with no problem so far (1 year) even under high speed like 70mph.
I upgraded to these Aero Crossbars hoping it would mean a quieter drive with less wind noise. I am so glad I did. There is not noise at all with these bars. I use them with my roof cargo carrier and I don't even notice it is there. These bars are even strong enough to haul my canoe. I am very pleased with them.
These fit the car along with the other Inno items perfectly. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
We recently purchased 2 kayaks & Thule roof racks from our local outdoor store.
After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof.
After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers.
Great Fit for my 2017 Jeep Patriot. Easy install and looks great!
Purchased with the, "Inno Through Feet for Aero Crossbars," for our 2017 Sienna. Pretty simple to install, maybe 20minutes after reading instructions. Seems solid.
I’ve had the system in place for over a year now and haul dual kayaks often! I love it! The only thing I wish I could change is the wind noise that’s comes with it. But I’m sure with any rook rack system you get that.
Worked fine after I had rails installed on my BMW X3. Said it would work without them but I tried and couldn’t get them to attach.
This kit does not fit well. All measurements have been double and triple checked down to the millimeter. The lock on the covers interfere with the hooks. You have to apply so much pressure to get it to close that it makes the rack come loose. Not very satisfied
I bought these as part of a kit with 60" Aero bars and the appropriate kit for my 14 Flex. I spent probably an hour and a half double checking my measurements and getting them torqued down properly. I spaced the bars on top of the car just a little wider than proscribed because I was planning on carrying 4x8 plywood, and it looked better to my eye. One thing to watch for: The instructions for the car-specific kit (in my case INK263) show the foot spacing measurements for a square bar, and the measuring point for these feet and Aero bars is different. That measurement point is indicated in the instructions for the feet, not the kit. Same numbers, just different reference point. Otherwise, they look good and are rock solid.
Really nice!
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
I did a lot of searching before selecting this rack for my Durango RT (no factory roof rails). It is easy to reinstall once the initial process is followed, I marked my doorjambs with a sharpie and it is easy to set up. Great product!
Product is great. Fits perfectly with some minor measurement adjustments. Can be assembled by one person, but helps to have two. Bought the complete roof kit and well as the Inno 80 basket for a Mazda CX3, took about two hours to assemble everything.
Excellent system. Even better when you consider the price. Thule and Yakima may have the name but Inno has the better product.
Great racks. High quality parts. Fit perfectly. Went together easily.
These are made perfectly for your vehicle. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
One was extremely hard to get on compared to the others (not sure if it had some rough machining or something), but once all we’re on, all was good
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.