Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2

The fitment into t slots is pretty bad, and even with the angled spacers they do not sit flat.2002159

Jenny N.

5/13/2024

I know that these are meant to be used with OEM tracks. Would you be able to send a picture of how they sit in the tracks? I would like to take a look.

I'm absolutely in love with Katie, my sales consultant for her great help & excellent follow up. Fully expecting cheap Chinese junk. I was delighted with the quality of the product, (Rhino Rack) which was received day after New Years. Pretty cool when order was placed Dec 29th. Simple illustrated instructions made pre assembly a snap. Wind chill is 2 below zero so I'm going to wait a day or so to mount to car. Two thumbs up from me!329848

1199341

I got my racks in a timely manner and had them installed on my Van in less than two hours. The instructions were a bit confusing (Didn't really match what was in the box) but I was able to figure out what to do. I have a THOR RIZE G18 camper van that is built on a 2023 Dodge RAM Promaster 1500. The brackets fit the mounting points on the roof. Since it is 9 feet to the roof (You can't walk on this roof) it took a while to move around to the four locations to place the towers. The awning also prevented sliding the bars side to side, so I had to put the towers onto the bar on that side before attaching them to the base. The racks look good and are firmly mounted to the van. Now I have to figure out how to attach my kayaks. (There is an air conditioner in the center and a solar panel also) I plan a two-month trip in June, so I will see how the racks work.1771829

Click to Enlarge

etrailer was good to work with, however this product was very difficult to install on my 2016 Ford Transit T250 Midroof.

The instructions were very confusing when using with PIONEER PLATFORM (107" X 58") UNASSEMBLED
Part No: 52105F. For example the mounts have no access to
tighten to the van once you put the cross bars on. But you need
To have the cross bars and frame installed fro they needed to be removed. They need to make this more clear on their instructions.

Be prepared to take at least 6 -8 hours of time to do this if you have never done it before.1390975

Click to Enlarge

by: Mike10/10/2022

Very sturdy. Used to mount Heavy Duty Rhino-Rack Crossbars to a RAM Promaster High Roof van.1446056

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Bob G03/23/2024

Installation was easy and I haven't had any issues. I had originally ordered a wrong part, but the person I spoke with at etrailer made it very easy to correct this and get the parts I needed. The next time I need something from my truck, I'll be checking here first.1753062

The Rhino racks purchased were exactly what I needed to carry kayaks on my 2015 Transit 250. The vehicle specific brackets were perfectly made.
Unfortunately the parts shipped didn't match the invoice and I ended up with mismatched parts.
When I called etrailer.com customer service, we worked out the problem and the new parts were shipped asap with the understanding I would return the incorrect parts promptly.
Overall, a great experience.290027

Click to Enlarge

by: Luke 12/05/2023

Super easy system to set up. Only problem was the screws that needed a special allen wrench to screw in and out began to strip. If I take them off, I will most likely need to buy new screws.1698811

Low profile foot system that works well ! 818942

Click to Enlarge

Click to Enlarge

Not Heavy Duty. These buckled on my 2020 RAM Promaster. Support said it was my fault (impact) and refused warranty. I only have a pioneer platform and 2 solar panels on the rack, hardly a heavy load.1206139

This was my first purchase with strainer and I just installed the rack so I have no input on durability but the install was super easy, I knew these would fit because the website made it easy to find products compatible with my Ram Promaster 1500, and Kaylyn was proactive and let me know their 71” bars were out of stock but 65” were available. Unbeknownst to her, I’m in a time crunch and her help came in clutch. I would definitely recommend buying from etrailer. 771550

Awesome product to get a rack on my ProMaster without having to drill any holes. Super easy to set up, highly recommend! 851514

Security screws and tool are great, but bottom s crews Ca t be tightened without removing aero crossbar. Solved problem by heating and then bending end of tool to 90 degrees.881570

by: Tom Owens07/23/2019

When I bought this for my ram promaster not even the manufacturer could tell me how it rated. I was so new they had no comparisons. I’ve had it on my van for over a year. Traveling around the country through all kinds of weather. Rain, hail, snow, and sun in the desert.
This rack is awesome.!!676810

I ordered these Rhino-Rack parts to complete a fourth bar on my Transit Van. The order was complete, and delivery was fast! What more could you ask for?1169835

Needed to lower my heavy duty Rhino Rack Did the job quickly and easily . Would have given 5 stars but seams a little less solid than original feet .1138628

Desi was awesome in helping us build the perfect mount for our roof top tent set up.1194997

Perfect product for my aero bars and great customer service getting it to me ASAP before a big trip - 423188

by: Frank11/08/2022

Quality products. Customer support top notch!1465251

1031208

Great product that is easy to install. Product arrived on time. Thank you!1057880

Easy to install and works good. 255798

Customer Service was awesome....and super fast. 786298

Strong, good appearance and functional. 724613