To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Nissan Rogue we're going to be taking a look at the Rhino Rack Roof Rack System, consisting of part numbers RRVA126S-2. That's going to be the Vortex arrow bars. Part number RRRLKVA, that's going to be the 2500-series legs and part number DK396, that's going to be the fit kit. The crossbars are made of an anodized aluminum, so they're going to be strong and durable and resist corrosion. The elliptical design of the bar is going to reduce wind noise and drag. The weather stripping is going to keep dirt and debris out of the channels as well as provide a slip-resistant surface for any of your mounted accessories.
The crossbars are 49 inches long. They have a weight capacity of 165 pounds. Now you do want to make sure you check with the manufacturer that your roof can handle that. They also come in a quantity of two. Now everything you see does come with a kit. We already have one bar installed on our vehicle and one side of our other bar completed.
We'll go ahead and put the other side together. First, you're going to take your base plate here and mind the position of the arrow. That's always going to be facing away from the vehicle. Then you're going to take your rubber pad, and you're going to put it on to the bottom of here. Again, you want to mind the arrow.
The arrow is going to be facing towards the front of the vehicle. We're just going to take our pad, and we're going to slip it on there. You'll see these grooves right here and on the bottom of your foot, these two rods. You're just going to pop it on to there. Now you're going to take your clamp and you're going to remove this bolt. You're going to place your clamp with the hook facing in like that, line up the hole, and replace the bolt loosely for now.
You will notice there's a little plate right here. You may have to loosen this bolt up, but we're going to take that plate, and we're going to line up our foot with our crossbar. Now we're going to measure from the end of the channel right here, and we're going to line up our foot pad, the edge of our footpad, like so. You'll find the measurement for your application in the instructions. Once we have it in the position we need, we'll go ahead and tighten up our foot pad. I do want to mention one of the nice things about the included tool, it is a torque tool. The curved piece here, when you know you've reached the right torque, it will straighten out, and you don't need to tighten it any more. Now with the bar fully assembled, we can go ahead an open up the doors and get ready to place it on our vehicle. With your bar in a general position that you want it, the manufacturer does say you need to measure from the center of this crossbar to the center of this crossbar. You'll find that measurement in your instructions. We do want to make sure that we measure both sides, so everything is square. With our bar in position, we're going to go ahead and tighten it up, making sure that we alternate between both sides. What I like to do is tighten up one side until I make contact, switch to the other side, and alternate, making sure that I tighten each side equally. Again, the provided torque tool, the curved part, is going to straighten out when you know you've reached the proper torque. Like that, and then you know you don't need to tighten it any more. Another nice feature is that the end caps are locking, so you don't have to worry about any tampering or theft. We'll go ahead and put those on now. In our final step, we'll be putting our end caps in. Simply place them in, and they are locking as well. We'll put the other one on the other side. Now we're ready to load up our gear and hit the road. That will finish up the look at the Rhino Rack Roof Rack on our 2016 Nissan Rogue.
Average Customer Rating: 4.5 out of 5 stars (90 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.I got the roof rack mounted anyways. Better pics to come when it's all finished!
I bought this roof rack kit for my 2015 Nissan Rogue awd 5-dr. The shipping time was excellent and everything arrived together and undamaged. The instructions are simple and easy to follow and I had it put together and ready to mount in about 30 min. Aligning it on the roof is definitely easier with two people, but can be done alone. The forward rack's rubber feet fit seamlessly on the roof of my car and tightened snugly with no worries of it flying off. Be sure to follow the directions for the included torque wrench and everything will form perfectly. The rear rack's rubber feet form is a little off and they don't sit flush with the car's body, but after torquing to the required tightness the rear rack fit securely with only a tiny gap between the body and feet. On the road, I made it up to 75 mph before any whistling was noticed, but some music at mid volume drowned it out. Be sure to cut the rubber and fit everything as precise as possible. This will prevent drag and whistling. The quality of the metal and plastic isn't as high as other brands, but when those other brands don't fit your car you have to compromise and this would be my top pick.
Thanks to etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Easy to install have not a year now no problems
I would say these are the part to give me the most concern when I installed but haven't had any issue.
Very easy to put together. Once together it was even easier to install on top of my car. Wasn't sure what to expect, but I am thrilled that I got this roof rack. Now I don't have to rely on other people and their cars to move stuff. Now I just have to wait till next ski season before they get full use
love it, no problem and easy to install and take on and off, 47,000 miles on the highway and not a single issue. I even like the song the ladder hums to me driving down the interstate. This is my second Rhino and both have preformed to a high standard.
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
I installed the Rhino roof rack system on our 2016 Nissan Rogue and then drove about 6000 miles on a camping road trip. Great product, stayed secure the whole time, never had to retighten or anything!
Installed the rhino rack kit on my 2017 Nissan Rogue. Fits really good and easy to install. Fast shipping too. I have a rack for my prius as well from etrailer.com and love there products. I installed a roof basket on my rack also. It also makes your ride look cool as well as functional.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
I was a little hesitant to order the rack as previously tried have not fit my Nissan Rogue.
The shipment came in super fast and the installation took me about an hour. I got a little confused with the rubber pads but once I figured it out, the rest went smoothly.
The rack fits well and looks great on my car. I have yet to test it - hopefully it’ll hold my kayak and I can finally enjoy it.
Thank you for the very speedy customer service! My roof rack is already here!
Things went well. Customer service was great.
I got the roof rack mounted anyways. Better pics to come when it's all finished!
I got the roof rack mounted anyways. Better pics to come when it's all finished!
Installed the roof rack myself in just a little while. As long as you pay attention to your measurements, the installation goes brilliantly. I tightened the hardware once that summer and once here in the spring. Just to make sure everything was still snug. My only issue was the whistling from the bars. My fault for buying the square bars but, a little fill and wrap on the bars and the whistle is gone. Very sturdy assembly which handles out 10' and 12' kayaks (and the occasional trip to the local big box store strapping stuff to the roof rack) with no issues.
Simple to follow directions that made this install quick and easy. The bars are nice and solid. I am much happier with the Rino Rack than with the sportrack.
Love the rhino rack system. I just need to remember to check the tightness of everything each time I use it. My wife and I purchased this to put kayaks up on her Rogue which had not roof racks. This system is easy to use and works great. We have now added the rhino stack for the kayaks and can fit more up there! Thanks etrailer.
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
I’ve had it for a year now and it’s holding up just like new! I take out off during the winter which is actually a really simple process. The attachments go on easily by hand and it’s Super durable roof rack. Very pleased
Rack fit nice and installed easy. Able to shake the whole car by grabbing on the rack so they are definitely not coming off.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.