To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars - 53" Long - Black - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, it's Evangeline here at etrailer. And today we'll be taking a look at our Thule roof rack system. So this includes the 53 inch long WingBar Evo crossbars, the rapid podium feet and the fit kit for your 2019 Honda Pilot. So you got your Honda Pilot and you're ready for adventure. In fact, my best friend has a Honda Pilot for her three kids. And with everyone loaded up, what tends to happen is then you have the need for more space for your other accessories.
So if you need to get a roof box for your adventures and cargo, or you wanna carry your kayaks around or even your roof mounted bike racks, what you need first is a roof rack system just like this. So this is gonna be the recommended kit from Thule for the Honda pilot, just because of the size of the rails. I personally prefer getting longer crossbars if possible but this is going to give you a nice low profile look. So we'll talk about the different features, different specs of this roof rack but we're gonna focus on our Honda Pilot today. That way you can see what types of measurements and specs are you looking for in relation to the different type of accessories you're carrying and focusing on your vehicle.
The first spec we're gonna take a look at is the overhang. And that's gonna be measured from the end of the tower to right before the end cap. We have it at two inches. So overhang is important if you want to carry accessories on the outside. Let's say you wanna maximize your crossbar length.
With this being only two inches, it's usually isn't enough for those clamps. Also, if you wanna use a load assist device like the Thule hullavator or the kayak carriers that drop down to the side, you're gonna need longer bars for that. But for something that's low profile, this is a good look. Next, we're gonna take a look at some roof clearances. So that's gonna be two different measurements.
First is gonna be clearance from the roof to the bottom of the crossbar. And that sits at around three and three quarter inches. So that's gonna be how much space you have for accessories that clamp around your crossbars. If they use wing nuts and U bolts, you're gonna need a good amount of space there to tighten that down. Three and a quarter is actually pretty good. The next is gonna be the height added to the top of our roof. So measuring from the roof to the top of the crossbar, it sits a little bit over five inches. So that's gonna be where your cargo is gonna sit. If you're carrying skis and snowboards, you're gonna wanna make sure you have enough clearance for those bindings. Especially if you have extra large bindings. If your carrier comes pretty close to your crossbars, you may wanna get things that have that skew lift or the extra riser. So these are the Thule WingBar Evo crossbars. So measuring for the inside from tower to tower, we have about 42 and a half of usable space for clamps. Now, since these are the WingBar Evo crossbars you also have this T track system. So you can mount accessories that mount to that T track. And then you can use the entire top part of the crossbar. Very helpful if you wanna maximize your space. Now, Thule does something a little bit different with the tracks. So let's take a closer look at that. The way the WingBar Evo works is we have this end cap. And I really like how the end cap just flips up. Then you now have access to your T track system. The downside to this is, well this splits apart so it should make it easier to mount those accessories. But over a period of time, I have noticed that this thermoplastic does get kind of stiff. And if you're mounting a lot of accessories, you might be able to take this apart. So that's just something I think about with using T track accessories with these crossbars. So let's talk about the tower. So these use the rapid podium feet, so that gives you that stability but also that low profile look. I do like the height it gives our cross bars since we have low profile but still enough clearance for the crossbars themselves. You also have these tabs on the end so that means everything is locked into position. And then we're gonna talk about the fit kit because that's what holds the towers to the vehicle itself. So to take a look at that, let's open up the tower. You can actually replace this with one key system lock cores, but without those you can use a flathead screwdriver to pop that end of the tower out and you can see how this uses a clamp as well as a rubber foot to adhere to your flush rails. Because we have fixed mounting points on our flush rails, We have a crossbar spread of 32 inches. So that's measured from one crossbar to the other for your different accessories, they usually require different types of crossbar spread. So double check that. You can't move this back and forth. That's gonna be your fixed point so make sure your accessories are compatible with that spread. Now, living with a roof rack system on your car. With this being low profile, the good news is that you're not hitting your head against it as you get into your car, which actually isn't a big issue since your SUV or your Pilot is a little bit higher up. Another thing is this being flush mounted, we have a really nice and secure fit with the aero bars too. That helps decrease wind drag and wind noise compared to your round or square cross bars. So the install process is gonna be a little bit tricky since we have clamps and we have a fit kit but I'll guide you through that process. Everything you need to install, this is gonna be included but I have some extra tools to make things a little bit easier. So one is gonna be a flathead screwdriver. That's gonna be for your tower end caps. You're also gonna need a tape measure just to make sure everything is lined up and you got good and even overhang. And finally, my special recommendation is the Moki doorstep. This goes right into your door and gives you that extra height and traction just to make it easy to install things and strap your cargo down. Now let's take a look at that process. So the install process is gonna involve three different parts: your crossbars, your towers, and then your fit kit. So I already installed the rear crossbars and we're gonna install the front one together. The first thing you need to do is first make sure everything is in place. So here we have all our different parts. These are the caps that are in your current flush rails on your Honda Pilot. So you're gonna need a T 30 torque spit to take those out. So other than that T 30 torque spit, everything else should be included. So we're gonna start by setting up the towers. The good news is that your clamps as well as your pads for your towers are all the same size so you're not worrying about switching up the front and the rear ones. Putting the rubber pad on the tower, notice how we have that little lip there. You're gonna wanna align that with the inside of that rubber pad. So that is just gonna click into that lip. And then this tower's gonna go into your crossbar. So you're gonna have specific measurements on your instructions, and that's gonna tell you how far out you should put this stopper. You can also adjust it once you get on your roof. Now let's put the clamp on. Then you're gonna have your two bolts. So you're gonna make sure you have the barrel in the back of your tower because that's gonna line up with your clamp over here. And then we're just gonna very loosely tighten down these bolts just to secure our clamp. I actually prefer not using that rubber tab but you can use it on the outside if you want to. I just think it takes up too much room there. So with our towers set up we're then gonna put our crossbars onto our roof. You can actually put those rubber pads in those clamps when it's on your rails separately, it's really just up to you and what makes it easier for you. I'm just gonna gently set these onto our rails. So we're gonna install the clamps to the flush rails and they're gonna use these little bolts. You're going to use that T 30 socket or T 30 bit to tighten them down. This is your chance to double check for overhang which is the length from the end of the towers to the other side of the bar if you didn't use the measurement on the inside. Once that's secure, you're then gonna tighten down the clamp on top. This is gonna use your special security torque spit or hex wrench. And that's just gonna tighten down there. Once you have those clamps fully tightened down on both sides and you double checked that everything is all nice and secure, your final step is to put your end cap on your tower. So those should just pop in. I actually have it in the unlocked position. There we go. And then lock it down with a flat head screwdriver if you're using the one key system lock cores, you switch them out right now, but once everything is in place that's it for the install process. You're ready to hit the road and load this up with cargo. So my personal thoughts about this system is if you're a huge fan of Thule, this might be a good option for you especially if you're utilizing their one key system and you have those extra lock cores to match with your other Thule accessories. Now, the downside for me with a Thule roof rack like this is definitely gonna be the T tracks. As useful as it is that the T track or the weather strip splits apart when you mount those accessories, over time I have noticed that they do tend to wear down. A system that does this the same thing but a little bit better would be an Inno roof rack. They have it where you just push down on the rubber strip, you mount your accessory. And I have not noticed any wearing down of the rubber that they use for those crossbars. Definitely check out our different roof racks here at etrailer to see what types of things you like, what you don't like. That way you can get the best fit for you, your cargo and your vehicle. And that was a look at our Thule roof rack kit for your 2019 Honda Pilot that included our 53 inch Thule WingBar Evo crossbars, our rapid podium feet and our specific custom fit kit for your vehicle..
Average Customer Rating: 4.8 out of 5 stars (506 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.Easy to assemble and install. Love the way etrailer packages everything you need and they all are correct for the vehicle you are mounting them on. Once installed they appear very strong. Installed on a 2023 Chevy Tahoe and did not interfere with the sunroof.
Very sturdy. Works well. The attachment to the roof rails on my 2023 chevy suburban works well. The "C" clamp design mechanism holds it tightly and securely in place. No fear of anything coming loose and falling off like other racks I have tried to use.
So far its the best roof rack you can get today! Had no issues when driving through rugged and bumpy terrains all day.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Favorite bar Thule makes. Super solid.
Once the mounting kit was installed, the fit was great. Too expensive though. etrailer ordering and shipping process was fantastic.
Easy to install. Super-fast shipping. Quality product. Glad I shopped with etrailer.
Solid roof rack, but get help from etrailer to make sure you get the core feet.
The bars are strong and fairly quiet, especially considering that I mount them on the main cab of my pickup truck and not on top of the canopy. My biggest concern is that the rubber strip that runs the length of the bar to reduce wind noise was badly damaged when I slid my canoe up on to the bars. Given the weight of the canoe, I'm accustomed to getting one end on a bar and sliding it back into position. Given the sensitivity of the rubber, is started pulling away from the bar and shredding when sliding the gunwales over the top of the bar. I'll try to be more careful, but a roof rack needs to be more utilitarian in my humble opinion.
Absolutely great product
Cross bars have been working very well. No issues with them
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
Excellent product. Arrived when promised. Very pleased. Thank you.
This is the first top of the line roof rack system I have purchased. I never expected to have issues but this thing is so universal, with gaps everywhere, that I can’t get it to stop whistling. I wish I could return and get my money back. I really expected something better from such an expensive system.
Arrived on time. The product was well packaged. These crossbars are just what I was looking for and look great on my Renegade.
Korren @ e-trailer found these longer bars for me and I'm enormously grateful for her doing so!!
Fit my 2015 Kia Sorento perfectly
53” Thule bars fit our 2021 RAV4 Hybrid! Most people appear to be using 47” bars for the 2021 RAV4 with flush roof rails, but that’s smaller than I wanted. I sometimes carry a sheet of plywood, or a kayak plus a cargo box, and wanted a wider rack for that. I had heard that upsizing to the 53” bar was potentially not possible because the mounting slots on the bottom of the bar may not accommodate the rail locations relative to the bar length. ETrailer helped me out with some dimensions, so I bought the 53” bar knowing it would be close. There is only about a quarter inch of play on either side on the rear bar, but it fit (the front bar had more play, since the towers are a bit further apart at the front).
I’m SO happy with the result! Now I can carry what I want on the rack, and have room to spare! It looks pretty good too!
I've always trusted Thule bars. I have an old Xsporter on my truck that works really well and it has held up over time. I needed to get a Thule rack for my Jeep Grand Cherokee and found that etrailer had all the parts I needed specified for my model. That was one of my favorite things about the site. No need to search around for the different parts to attached onto the factory rails. Once I received the rack and components, it was really easy to install. I pretty much watched the etrailer videos before hand.
I have the older Hullavator 897XT to haul my kayak in. With the WingBar Evo, I found I needed to get a slightly longer bolt (6-1.00 x 30), which I got from the local Ace hardware store, to attached the Hullavator support bracket to the WingBar. Once I got those bolts set up, I was on the water with the kayak the next day.
Talked to the customer service a few times and they are great friendly people. And I can understand what they are saying.
Website is easy to use & is better at putting together the correct package than Thule’s site.
etrailer had all the parts in stock for my 2020 Kia Telluride.
Payment process was simple.
Received periodic updates from staffer on my order & could actually reply if needed.
Installing the roof rack went well. Estimate start to finish was about 2 hours. Found it best to really examine each diagram in Thule’s step by step instructions to get it all right on the first try.
Hardness part of the installation was getting the crossbars installed at the proper distances. A tailor’s soft measuring tape & some masking were great aids.
Great product, but even better customer service from etrailer.com. Kaylyn went to a lot of effort to help me get what we needed in a very difficult time for availability & logistics
Thule is an excellent product and the fit on my 2017 Chevrolet Colorado is perfect. The good people at etrailer were super helpful in getting the correct fit parts to me as quickly as possible, especially during a tough year for all. I’ve found my Thule racks to be the perfect tool to take our kayaks on our adventures!
I’ve been searching for a set of crossbars for my 2021 Crosstrek. After looking at several different companys,, I decided to go with etrailer.com and get the Thule Wingbar Evo Crossbars and Evo Raised feet. Ordering was quick and shipping was even faster! Installed them in about an hour with no issues. I love the way they look, and the construction is solid. Shout out to the staff for doing a great job and for the great communication from placing the order, confirmation, updates and shipping the order. You will not be disappointed!
Thule Rack looks awesome on my Kia Telluride. Products took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up one of the pieces of rubber while installing and etrailer sent me a new one at no charge. Definitely recommend etrailer.
The package was shipped in its OEM box with no additional protection. As such the Thule Aero wing cross bars were both dented on one side. Not sure if I received a return or if the product was dented in shipping as there was a significant amount of packing tape on the dented side. Either way, the end caps wouldn’t fit into the dented cross bars until I cut away plastic from the end caps. For $XXX+ dollars you think that would buy more shipping protection. Unbelievable, really.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.