To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.
It can work with bike racks, cargo baskets, or cargo boxes, and the general shape of the bars is going to be an aerodynamic shape. That's going to help cut down wind noise and drag while you drive.Moving our end cap here, this also works with T-Track accessories, but unlike the others, you actually just push down the strip at the top here so the T-Track accessory just slides in there that way. A lot of the other styles out there, you'll have to remove the strip, cut it to length, and kind of go through a hassle to get this installed, and this eliminates that for you.At the ends here, we do have these plastic locks that can be taken out and removed, and replaced with the Yakima SKS lock system, so you can secure this to your vehicle and also make inaudible 00:01:28 with your accessories that you're hauling. And, once everything is finished with your trip, these just can pop out of place by opening the ends and we have these plastic pieces that fit on top here, so you don't have to remove the mounts, and they're ready to go for next time.Now that we've shown you how this looks here, let's go ahead and show you how it actually installs. We have our rear bar partially assembled on our table here.
We'll go through the process of installing it onto our vehicle. We have the bar and the towers applied on one side, so our next step is we're going to go to the tower here as well as the fit kit for our actual bar, and install that on the other side.Starting with our plastic piece here that just pushes in place on top of our tower until you hear a light click. Then we'll take our metal piece here, which attaches to this screw on the inside. Then you tighten that down with the included tool. You're going to hear two or three audible clicks once this is done, like so.
Then we can slide this into the bottom of the bar. Then our final step is putting in our end cap.Now we can move on to our actual mounting point here. We'll take the padded portion and these points here will fit into the holes in the bottom. Just kind of match up. Then just push them into place like so.
Then we'll take the screws and the flat washers and install them onto our fixed mounting points onto our flush mount side rails. Find our points, and find the proper configuration, too, that works best for your vehicle. We'll get these finger tightened first. Then we use the tightening tool and finish them off.Now we can take our bar and set it into place as well, making sure that they're open all the way. We'll set them into our cradles. Our landing pads, I should say. And then we'll get the crossbar overhang figured out as well. You're going to want to make sure that that's even on both sides. Have to loosen it up just a little bit. And try not to do that. There we go. All right, that looks good. Our final step is to tighten down the bolt in the center here. This is going to tighten up the tower to our bar. That's done. Close this up, and that'll lock it to the landing pad, and repeat this on the driver's side as well.Next, I'm going to give you a couple quick measurements here that'll help you out in regards to the height that it's going to add to your vehicle. We're going to start in the center of the roof and measure to the bottom and the top of the bar. From the center to the bottom, it's going to be about five inches. From the center to the top, it's going to be about five and seven eighths inches, so that's adding quite a bit to the top of your roof, so keep that in mind when you have your bike racks and your cargo baskets fully loaded when you're pulling it into your garage. And this roof rack system does have 165 pounds of carrying capacity once installed, but you always want to double check with your vehicle's manual and go by its recommendations, and go by the smaller of the two numbers. And there you have it for the Yakima JetStream roof rack system on our 2017 Honda CR-V.
Average Customer Rating: 4.8 out of 5 stars (253 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
In the confusing world of roof racks, the etrailor site had a locator tool that made it easy to identify the correct landing pads and towers for my vehicle.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
Fit our Subaru Forester perfectly. Install was a breeze.
I had cross bars and landing pads on my Jeep Grand Cherokee. I bought these to put on my wife’s new Grand Cherokee L. They were extremely easy to install and now I can easily move the roof rails between the two vehicles. They are a great product as is most of Yakima’s products. I highly recommend them.
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
You guys provide great products and excellent customer service.
Thanks
I have these installed on a 2022 Honda Pilot. I could not get them to fit on my raised roof rails with the included rubber gaskets. I have mounted them without the gasket but this leaves a gap between the rail and the landing pad. This seems secure but does not have a finished look. I will be trying to see how to get the gaskets to fit.
great service
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
Great bars and easy installation on my 2012 Prius C
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
not installed yet but everything was delivered on time and in good condition
I love the ease of removing my crossbars at the end of the season with these landing pads. Highly recommend these.
Great company. Fast delivery.
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
Great product. Great service.
very informative and great work
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.