To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 54" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2015 Honda Accord, we're going to be test fitting the Inno Aero Roof Rack System, consisting of part numbers INXB115-2, these are the Inno Aero Crossbars, 45 inches long. We'll also be using the Inno Flush Feet System to hold those bars in place. That's going to be part number INXS200, and finally we have the Inno Fit Kit to attach it to our actual Accord here. That's going to be part number INK592.This is a great roof rack system that can carry a wide variety of accessories ranging from bike racks to cargo baskets, to cargo boxes. The shape of the bars themselves is aerodynamically shaped, so that's going to cut down the wind noise and drag while you drive, eliminate the need for any fairings that you might need for say square bars. Moving onto our end caps, they do come with a lock already installed, so once you have everything on your roof, it's going to be secured to it, and removing our end cap here, you can see that we have this rubber strip up at the top here.
That's actually, excuse me, that means you can utilize T track accessories with this. Instead of having to remove the strip, you can actually push down that center portion, so you can just push the T track accessories in place and not have to make any cuts at all.Everything is labeled as to which side it's supposed to go on, so that will avoid confusion. You can see how it attaches underneath the door frame here. Any place that makes contact with the vehicle, whether it be the clamp here, or the rubber pad on the bottom, it is going to help the vehicle from any scratches or abrasions once you're installing it.How we got our front bar into the position it's in now, we set it in place and measured from the center of the door jam to the center of the front bar on both sides, to make sure that it was even. Let's go ahead and show you how the rear bar goes into place.We already have it put together on our handy little table here.
We have all the parts in front of you here that's going to come with the kit once you have it. First things first, we're going to flip the bar upside down, like you see here. It's going to make it a little bit easier to show you how to do this. We'll start getting things prepped.First, we'll take our bracket piece here, and we'll install it on the end of our bar. You can see that there's a little notch here.
Make sure that it fits in on the proper space up at the front, so then we'll push that in to this point here. Then we're going to take our flush foot, and this tab at the top here, will fit into this portion, and again, make sure it's on the right side, and it's going on the right portion. We'll push that out until it rests, and then we'll take our included Allen took here and go to the center, and we'll just loosely tighten that down, because you want to be able to move this back and forth, because we're going to have to measure the space in between our flush feet here in a second.We'll take our measuring tape, measure from one side to the other. We'll measure it out as prescribed in the instructions to where it needs to be, and then we'll tighten it down the rest of the way with our Allen tool. Next we'll take our fit kit and start installing it as well.
You can see how it fits in to the bottom here, and it just pushes into place like so. Then we'll take our clamp, this goes to the outside We'll loosen up our bolt here all the way. Loosely tighten that up, and now we can move on to our vehicle, and we'll set it in place.We'll start by opening up our two rear doors, and then we'll set the bars down. Now at first it doesn't matter where you set them because you're going to be measuring this out anyway, but when you do set these down, we're going to try to be a little careful here because we still don't want the bar coming down on the vehicle. Okay, so to measure the distance for the bar at the rear, we'll again measure from the center of the door jam to the center of the rear bar. You'll find this measurement in your instructions, which I wasn't too far off. How's that for a coincidence All right now to make sure that it's eve non both sides, it looks like we can come towards the passenger side just a little bit.All right, now we can start tightening things down. It does come with a tightening tool, and we'll just loosely, we'll just get it snug, say it that way, against the door frame here first, and then we'll tighten back and forth until we can hear two or three audible clicks from our tool. That lets us know that it's tightened down to it's specification, so we're not going to over-tighten it and possible damage the vehicle that way, or under-tighten it and have it not be safe when we install our accessories. Now when you do hear these clicks, a word to the wise, it sounds like you're breaking it, but I swear you're not.Some other accessories that you can put on these is anything from ski carriers, to ski and snow board carriers, and maybe kayak carriers if you're roof can take the weight that's on the top. Inno offers all of these and you can find them on etrailer.com. There we go.Next, we'll install our end caps. These just push into place, as you see. Now I'm also going to give you a couple of quick measurements, to give you an idea of how high this sits off the roof. As you can see, it does have a pretty low profile to it because that's the style that these go after. From the center of the roof to the bottom of the bar it's going to be about 1 and 3/8 inches, and from the center to the top it's going to be about 2 1/2 inches, so that's more than enough space for those accessories that wrap around the bars as opposed to using the T track accessories, and with our sunroof here, you should not have any problem using that.One thing to note though, these do have a carrying capacity of 165 pounds, but you always want to double check with your vehicle's manual to make sure your roof can take those weights, and go by the manufacturer's recommendations. There you have it for the Inno Aero Roof Rack System on our 2015 Honda Accord.
Average Customer Rating: 4.6 out of 5 stars (364 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Perfect fit for my car, well packaged and detailed instructions. Easy order process and fast shipping. Will buy from etrailer again. Thank you
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
Worked great! Held up a roof top tent all summer. No bending or damage from use.
Work exactly as described and after a year, still in great condition.
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
Fantastic customer service.
Andrea is great.
Thanks for your help!
Easy to install and very sturdy. Might be more expensive than others on Amazon but trust me spend the money on these.
Pretty bendy, could be a bit more solid. But they do the job
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Package arrived quick one problem thou blue box inside big brown box which held the roof rack bars was damaged and when i opened it up the rubber end caps are missing is it possible u can send them to me i would appreciate it Thank you
Easy to install and have worked great so far!
Super easy to install and remove. Lock feature is great
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
My order just arrived this afternoon and I have not yet looked at everything by I am upset over the rails falling out of the box as it is damaged. I will be looking to make sure all parts are contained but so far not thrilled with the condition of the materials as delivered.
Perfection!!!
Perfect fit.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Very noisy, had to take them off when not in use.
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.