Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Silver - Qty 2
Item # Y63EB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (97)
- Q & A (0)
- Videos (9)
- Photos
Yakima Roof Rack - Y63EB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Silver
- Yakima
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Silver - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima BaseClip 168:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8006168 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Silver - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Kit Installation - 2021 Ford F-150
How's it going everyone Today we are going to be taking a look at the Yakima JetStream roof rack system, installing it and explaining how it works on our 2021 Ford F-150. So, with the F-150 we have a good amount of bed storage, but if you want to get some longer or larger items, like say a kayak, or maybe you want to use this in conjunction with like a ladder rack system to get some longer loads up on top of your roof, this is gonna be a great option to do so. So, let's take a closer look at how it works. As far as the weight capacity goes of our roof rack system, it is really robust, but you want to keep a couple things in mind, that being the fact that the system itself has a weight, the accessories that you're gonna put on 'em. Also we're going to add to that, and your roof is going to be rated for a specific weight as well. Make sure you check the owner's manual in your case, find out what that weight rating is and make sure that all of the components, including the roof rack and the accessories don't exceed that limit.
They get the name JetStream because of this aerodynamic shape on our cross bars here. So you can see we do have this rounded portion in the front, and then it tapers towards the back. That is gonna help cut down on some of the wind noise and drag you get from putting something up on your roof, but you're still gonna hear it. This weather strip on the top is gonna help cut down on some of that as well. And this channel is also gonna be able to be used for your T Track accessories if your rooftop accessories do have that as an option, and the rubber strip will help keep them in place.
Underneath you will typically have another rubber strip that'll cut down on some of the wind noise. In our case, this is just for demonstration and we don't actually want to have to trim that up, according to where we're putting our towers every time. So, we don't have it on, but in your case you would. And again, that would help cut down on some of that sound and noise while you're driving. The system we're using today uses 60" cross bars, which I think is a really nice size for our F-150.
The overhang is enough that we could maybe get a clamp-on accessory around here if we wanna have easier access to one side, especially considering it is a pretty tall vehicle. but it's not so much that I'm gonna be worried about hitting my head or extending past the overall width of the vehicle. If we want to, I'll measure now just to figure out how much height we're adding total. So, from the middle here to the total height of the system, it's going to be coming in just under 4", that's how much height you're gonna be adding. So, if you have accessories, add that overall height to your cross bars to find out if there might be some clearance issues wherever you're going, or that number is just something you wanna keep in mind as far as, "Can I store these in my garage" Another measurement to get is how much space we have underneath, so that's gonna be about 2 3/4, that's how much room you're gonna have for your clamp-on accessories.
If you want to use those, you have tons of room for them to make clearance before they're gonna hit the top of your roof. Or if you have something like skis or snowboard bindings that you're worried about making contact there. Taking a look at our end caps, we have a nice glossy finish. Right here is where you would upgrade to metal lock cores if you chose to do so, which I would definitely recommend. And if I just pinch the top, I can pull this off and get this out of the way so we can see what this is protecting. It's going to be our fit kit hardware. All that we would need to do to get this on or off is store it in here. So, that's the job of the end cap is to protect that, keep that in place, and we'll take a closer look at all of that in the install portion. Talking about the fit overall of the bases. You can see how the extension on the pads here fit right into the ridges of our F-150. So as long as you take the time to get those measurements right, which we'll explain a lot in the install portion, it's gonna be a really nice solid fit. Something that's also unique to the JetStream system is how adjustable it is. It's got adjustable pitch and toe settings, so if you have different roof shapes, you can accommodate your cross bars to fit that really well, and it can definitely be a little bit daunting and a little bit tricky, especially when you see all those measurements. But we'll walk you through that process right now. First thing we like to do is just to lay everything out so that we know what and where it is. So, we have our cross bars set up here. We have the bases for the towers, we have our end caps here and here, the towers themselves. We have our fit kits for our faces, and we have the tool that we need to tighten everything down. But our first step is going to be preparing our towers. To get our towers on, first thing we'll need to do is get our end caps off. So I just like to use the tool they provide to get that initial tab loosened up, pop that off, and now we'll see on our towers, we have this metal plate here at the top. All we need to do is line that up and slide that into the channel underneath. And we'll do this on the other side as well. When getting your towers on there's a chance they might be too tight. If that is the case, release this security door here, that'll expose this bolt in the back and we can loosen that up with the tool if we need to, to help it slide up and down our towers. And now we're gonna find our M3 measurement, since this is gonna be our rear cross bars, and for that the number that we get is 47 3/4. So we can look at this ruler right here on the cross bar, find that number 47 and about 3/4 right there. Then we'll find that on the other side, and then we can go ahead and tighten this bolt down. In addition to this bolt tightening up our towers, this is also the pitch setting. So in the case of the rear crossbar, it's going to be B, which is going to be the one in the middle, so we're good to go. This front bolt is going to be the toe setting. In the case of our rear cross bars, that is going to be B as well, which is the middle. But it's important to know the orientation of your bars. So we drew a little arrow in the middle of ours. We want to know that the back is going to be C, towards the front is going to be A, same. The back is going to be three, towards the front is going to be one. So B and two are in the middle like we have them here. Now it's time to put our bases onto our towers. So we see this arrow pointing outward, we wanna make sure that lines up, if they're not already put together, it's just a matter of fitting this rubber piece onto this plastic piece and making sure that that's securely in place. Again, arrow out, fits right there onto our tower. Just snap it down in place and we'll repeat that process on the other side. With our pads and our towers both in place and in the right position, we're going to get our bar up on top of our roof. We wanna make sure that we have the rounded side towards the front and the taper towards the end. And we're just going to guide it slowly, using those pads to take a lot of that weight for us, get it roughly into place, but its measurement is going to depend on where the front crossbar ends up, so let's move on to setting that one up. Up until this point on our front cross bars, the whole process has been the same. We put the pads on our towers, put the towers into this channel underneath our cross bars and we even have the same measurement, as far as the strip goes underneath. So, the first difference that we're going to run into is our pitch setting. In this case, we want the pitch setting to be A, which is going to be the direction closest towards me. So I need to push this down, or maybe loosen this up just a little bit so that we can get that over there. Now you see we're at there, but I actually slid mine a little bit down this track so I wanna make sure I find that 47 3/4 mark again before I tighten everything down. So right there is good. We're at A here on a pitch setting, so we're gonna take the provided tool and tighten everything down until it clicks, just like we did on the other steps. As you can see here, on our toe setting, we have shifted forward. We actually want that to be two, which is the one in the middle. So I'm gonna loosen that up just a little bit and I like to use the tool just to push that down. So just like that. Now our toe setting is back in two, and our pitch setting is in A, and we're going to repeat this process for the other side. Keeping in mind if you don't have access to that bolt, all you need to do is open the security door with our bases, our towers in place and the measurements and pitch and toe settings correct. We're going to get our front crossbar on and roughly in place, same process as the back, making sure that we have that rounded part facing forward and the taper towards the end. And now we'll get our first real measurement. This first measurement is going to be from the corner of this painted roof here right until the leading edge of our cross bars. So I'm going to look for the number, in our case, of 8". So I'll set that up. Again, we're just using the fabric tape measure. You can use the one provided. We're using our own, so we need to slide this up just a little bit and then I'll go to the other side and adjust it accordingly. After we get our front crossbar on and in place, and in the correct measurement on both sides, we'll get our M4 measurement. In this case, from leading edge of the rear crossbar to leading edge of our front crossbar. We want that to be 32". So I'm back to using the regular tape measure, and we need to move this back about an inch or so, maybe just a little bit forward. Right there looks pretty good at 32. And then we're going to get that same measurement on the other side. With both of our cross bars and towers in place, it's time to move on to our fit kit for our clamps. So we'll open up that security door first. We need to slide this clamp up underneath this bolt here. And now we have a couple of different settings that we can change. First is going to be up and down, and we just want to rotate this until we see that this is lined up to be flush on our roof. And now we will insert the tool into the bolt itself and start tightening that up. In this case, I'm only gonna go to about 50% on this side, and then I'm going to go back to the other side, get that to about 75% and then come back and finish them both, just so I don't pull too much one way or the other. I went back to the other side and now I'm back on the side that we started at to finish up. So I'm gonna tighten it down the rest of the way. Again, waiting until I hear that click sound so I know that it's torqued properly. I'll close the security door up and then we're gonna repeat this process for the rear cross bars, it's gonna be the exact same. The clamps are the same as the front, so you don't need to worry about which ones belong to which. With all our clamps in place we're going to put our end caps on, starting with the bottom, and then we'll click the top into place. And if you opted for the metal lock cores, now you would lock those up. In our case, I'm just going to put our end caps on for now. Once we have all our end caps on and locked up, if you've chosen to do so, I like to finish things out just by doing a shake test to make sure that everything is sturdy and secure. You can see I'm moving the whole vehicle and nothing is moving on here at all. So everything is in place, it's secure, and we're ready to hit the road. Overall, if you're looking for a really rugged, robust and adjustable roof rack system, the Yakima JetStream is going to be a really solid option. I do like that we have those adjustments able to be made to accommodate different roof shapes. In our case, it helped get that front crossbar tapered backwards to make a really flat surface, and I think that overall it matches the aesthetic of the F-150 really well. That being said, all those adjustments might not be for everybody. So if that's the case for you, you can check out the Rhino-Rack Vortex Arrow system. We have videos and a page explaining how that works on this vehicle as well. So feel free to check that out if you want to. A little bit easier to install but less adjustable. So it's kind of either way, whichever way you decide to go though, again, I do think the Yakima JetStream is a really nice option. This, again, was just a quick look at how it fits and how to install it on our 2021 Ford F-150.
Customer Reviews
Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Silver - Qty 2 - Y63EB
Average Customer Rating: 4.8 out of 5 stars (97 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: TimN03/19/2024
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Bacon04/02/2020
I though I would love the core bar set up on my truck but I have really grown to love them! Weather it’s bikes, kayaks or a ladder it works great! And even better it looks great! Quieter than Thule square bars and Yakima round bars by far. I would not only buy again but one of the bars was damaged in shipment and etrailer took care of it by sending a new one to replace it right away. Will be buying from them again! Good customer service!!!!
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: Roland01/08/2024
Well packaged and on time
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
by: Aaron06/07/2017
Awesome price! Shipped to me fast and it's an amazing product. Customer service helped me through some ordering confusion and got everything figured out very smoothly. Love the roof rack!
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by: Greg 06/07/2023
Nicole was beyond helpful!!!
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions
by: Mike 05/20/2020
Great product... love that fact that I can take the bars on and off without having to disassemble the system. Very convenient when not its not being used.
25
786
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Recommended Roof Rack System For 2021 Kia Telluride LX with Naked RoofThe only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
view full answer... - Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed CapTo install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory RailsWe can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Yakima Roof Rack that Fits 2019 Honda Passport with Raised RailsSince your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Yakima Towers & Fit Kit For 2023 Ford F-150 SuperCrew For Yakima Round CrossbarsHi there Dale; yes you can absolutely just get the towers and fit kit for your 2023 Ford F-150 SuperCrew from Yakima to utilize your round crossbars. All you need is the following: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y27FR - RoundBar SL Adapter # Y03536
view full answer... - Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked RoofTo attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
view full answer...
- Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak CarrierIn order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer... - Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford RangerTo install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
view full answer... - How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer... - Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Toyota Tacoma Access CabFor your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part # Y00409, # Y28TR, # Y03536, # Y06125, # Y06128. This is a 58 inch bar setup and based on install pictures I've seen of this rack on a similar Tacoma a shorter 48 inch bar would not fit.
view full answer... - What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRXI do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. Yakima BoatLoader EVO Telescoping Load Assist - 28" Extension, part # Y04085. This load assist bar is stored in your crossbar when it is not in use. It has a weight limit of 80 lbs....
view full answer...
- Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Recommended Parts For Carrying 4 Bikes and Camping Gear With a 2023 Honda HR-VThe Draw-Tite Max-Frame Trailer Hitch Receiver # DT57YR is our highest capacity receiver for your 2023 Honda HR-V. This receiver has a maximum tongue weight rating of 300lbs but be sure to verify you do not exceed any weight capacities given by Honda. I recommend pairing this with the Yakima RidgeBack Bike Rack # Y02458 to keep the weight down. This carrier weighs 35lbs and can support 4 bikes up to 40lbs each. You may need an Adapter Bar # Y02531 for any of your bikes with an alternative...
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
view full answer...
- BaseClips for Yakima Baseline Towers and RoundBar Crossbars on a 2023 Ford MaverickThe correct clip kit for your 2023 Ford Maverick with naked roof to use the Yakima RoundBar Crossbars # Y00409 and the BaseLine Towers for Yakima Crossbars # Y28TR with the RoundBar SL Adapter # Y03536 is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180.
view full answer... - Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy CruzeThe difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Replacement Parts Available For A Yakima BaseLine Roof RackWe do have a good amount of replacement parts available for both the Yakima Roof Rack set up ( # Y00422, # Y28TR, # Y06150, # Y06148) and the Rhino-Rack Nautic SUP/Kayak Roof Rack # RR570 you purchased, so you definitely can. That said, I have all the Rhino Rack replacement parts listed below and a few of the parts for the Yakima set up. If you do not see what you are looking for, just let me know and I will see if we can get it for you. Rhino Rack: Cam Buckle Cinch Straps # RTD3 M6 x...
view full answer... - Quietest Cross-Bars For A 2017 Ford F-150 Super Crew CabFor your 2017 Ford F-150 SuperCrew Cab, we have several different options that will suit your needs. To start, we offer the Yakima JetStream Crossbars # Y00426. These bars are the quietest, are 60" long, and is rated for up to 165lbs. To go with those bars you will also need the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122. We always recommend using some type of locking system to keep all of your items safe; The Yakima...
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side RailsFor your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
view full answer... - How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel TowingGenerally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
view full answer... - Does the Rhino-Rack ROC25 Roof Rack Fit a 2021 GMC CanyonYes, the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR93GR will fit your 2021 GMC Canyon as long as you have the Crew cab model. If you have the extended cab model, you would need to use an alternative option. 2021 GMC Canyon Roof Rack by Yakima - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06110
view full answer... - Recommended Roof Rack And Canoe Carrier For 2012 Ford F-150 SuperCrew CabThe Yakima JetStream Roof Rack will work well on your 2012 F-150 SuperCrew. This roof rack includes the JetStream crossbars # Y00426, BaseLine towers # Y28TR, and fit kit # Y06168 designed for your F-150. To help cut down on the wind noise I recommend a fairing like part # Y05018. This attached to the front crossbar and has rubber bumpers that protect the truck finish. To secure the canoe to the crossbars I recommend the Thule Portage Canoe Carrier, part # TH819. This system attaches to...
view full answer... - Recommended Roof Rack for Two Kayaks for a 2012 Ford F-150 SuperCrewThe Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, and part # Y06168 is my favorite option for a 2012 Ford F-150 Super Crew and what I recommend. In regards to fit, Yakima and Thule have the best fitting options on the market so I would have absolutely zero concerns with safety/security. If I were going to place expensive items on the roof these are the roof racks I would use without a doubt as they both have a longstanding reputation for quality and longevity. The system...
view full answer... - Can a 72" Thule Wing Bar Crossbar Be Mounted To Roof Of a 2012 Ford F-150 Extended Cab? As Thule does not show they have a roof rack confirmed to fit the naked roof on your 2012 Ford F-150 extended cab it appears you are going to have to go with a Yakima roof rack. We have their 70" Crossbars # Y00427 you can install with the Towers # Y28TR and 2 of their Fit Kits # Y06168.
view full answer... - Recommended Base Clip Fit Kit & Crossbar Setup For A 2013 Ford F-150 Raptor According to Yakima, for your 20123 Ford F-150 Raptor, you're unfortunately not going to be able to use the older Q-clips. Instead, you're going to need to be using the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06168. This fit kit is going to work great with the BaseLine Towers for Yakima Crossbars # Y28TR and standard crossbars like the Yakima JetStream Crossbars # Y00426. If you're able to let me know what bars you currently have, I'd be happy to find you the correct...
view full answer... - Parts Needed to Install Yakima LockNLoad Platform B on 2013 Ford F-150 SuperCrewTo install the Yakima LockNLoad platform # Y05045 on the roof of a vehicle you'll need the SL adapters # Y05042-2, the towers # Y28TR, and the base clips part # Y06168 and you'd have everything needed to install on your 2013 Ford F-150.
view full answer... - Which Yakima Roof Rack Will Fit a 2014 Ford F-150 SuperCrew?The best Yakima roof rack that is currently available for your 2014 Ford F-150 SuperCrew consists of: 60 inch JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06168
view full answer... - Single Crossbar Recommendation for a 2013 Ford F-150 SuperCrew CabWe definitely have a half system available that includes only a single crossbar for your canoe. For a great option for your 2013 Ford F-150 SuperCrew cab, I recommend the following parts: - Yakima JetStream Crossbar - 60" # 8880649 - x2 of the BaseLine Towers # 8880618 - BaseClip Fit Kit # Y06168 With the JetStream crossbar, you receive the benefits of an aerodynamic shape that leads to a quieter ride and increased fuel efficiency. The fit kit is designed specifically to fit into the...
view full answer... - Roof Rack for 2011 Ford F-150 to Carry Two Thule Hullavator Kayak CarriersSince the max crossbar width the Thule Hullavator part # TH898 can take up is 28-1/2 inches for a roof rack that fits your 2011 Ford F-150 that would work great is the 60 inch bar width Yakima Jetstream roof rack part numbers # Y00426, # Y00146, and # Y06168 which the Hullavator can fit into the top channels of and would easily accommodate both racks. This will install on the roof of the truck though. If you'd prefer a solution for the cap let me know.
view full answer... - Can Four Bike Racks fit Yakima Roof Rack on 2013 Ford F-150 Super Crew Cab?The weight capacity of the roof rack you mentioned that fits your 2013 Ford F-150 Super Crew: Yakima CoreBar Crossbars # Y00422, BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06168 (you will need a quantity of 2) has a weight capacity of 125 lbs. The determining factor in regards to capacity will be whatever is lower, the rack or the capacity of your F-150's roof. The CoreBar Crossbars are 60" and extend past the roof a bit so your fork-mounted bike racks will realistically need to be...
view full answer... - Yakima JetStream Crossbar Roof Rack for 2012 Ford F-150To install your existing Yakima JetStream Crossbars like the 60" # Y00426 (which is the length recommended for your truck) on your 2012 Ford F-150 SuperCrew you will need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06168. It looks like the Towers and Fit Kit that you mentioned are for later model year Ford trucks. I have attached a short video review on this setup below that you can check out as well.
view full answer... - Single Crossbar Recommendation for 2014 Ford F-150 Crew CabFor a single crossbar on your 2014 Ford F-150 Crew Cab, I recommend the Yakima BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06168, BaseLine towers # Y62TR, and Jetstream Crossbar # 8880649. I also recommend the locks # Y07202 for security.
view full answer... - Recommended Roof Rack And Canoe Carrier For 2012 Ford F-150 SuperCrew CabThe Yakima JetStream Roof Rack will work well on your 2012 F-150 SuperCrew. This roof rack includes the JetStream crossbars # Y00426, BaseLine towers # Y28TR, and fit kit # Y06168 designed for your F-150. To help cut down on the wind noise I recommend a fairing like part # Y05018. This attached to the front crossbar and has rubber bumpers that protect the truck finish. To secure the canoe to the crossbars I recommend the Thule Portage Canoe Carrier, part # TH819. This system attaches to...
view full answer... - Recommended Roof Rack for Two Kayaks for a 2012 Ford F-150 SuperCrewThe Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, and part # Y06168 is my favorite option for a 2012 Ford F-150 Super Crew and what I recommend. In regards to fit, Yakima and Thule have the best fitting options on the market so I would have absolutely zero concerns with safety/security. If I were going to place expensive items on the roof these are the roof racks I would use without a doubt as they both have a longstanding reputation for quality and longevity. The system...
view full answer... - Can a 72" Thule Wing Bar Crossbar Be Mounted To Roof Of a 2012 Ford F-150 Extended Cab? As Thule does not show they have a roof rack confirmed to fit the naked roof on your 2012 Ford F-150 extended cab it appears you are going to have to go with a Yakima roof rack. We have their 70" Crossbars # Y00427 you can install with the Towers # Y28TR and 2 of their Fit Kits # Y06168.
view full answer... - Recommended Base Clip Fit Kit & Crossbar Setup For A 2013 Ford F-150 Raptor According to Yakima, for your 20123 Ford F-150 Raptor, you're unfortunately not going to be able to use the older Q-clips. Instead, you're going to need to be using the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06168. This fit kit is going to work great with the BaseLine Towers for Yakima Crossbars # Y28TR and standard crossbars like the Yakima JetStream Crossbars # Y00426. If you're able to let me know what bars you currently have, I'd be happy to find you the correct...
view full answer... - Parts Needed to Install Yakima LockNLoad Platform B on 2013 Ford F-150 SuperCrewTo install the Yakima LockNLoad platform # Y05045 on the roof of a vehicle you'll need the SL adapters # Y05042-2, the towers # Y28TR, and the base clips part # Y06168 and you'd have everything needed to install on your 2013 Ford F-150.
view full answer... - Which Yakima Roof Rack Will Fit a 2014 Ford F-150 SuperCrew?The best Yakima roof rack that is currently available for your 2014 Ford F-150 SuperCrew consists of: 60 inch JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06168
view full answer... - Single Crossbar Recommendation for a 2013 Ford F-150 SuperCrew CabWe definitely have a half system available that includes only a single crossbar for your canoe. For a great option for your 2013 Ford F-150 SuperCrew cab, I recommend the following parts: - Yakima JetStream Crossbar - 60" # 8880649 - x2 of the BaseLine Towers # 8880618 - BaseClip Fit Kit # Y06168 With the JetStream crossbar, you receive the benefits of an aerodynamic shape that leads to a quieter ride and increased fuel efficiency. The fit kit is designed specifically to fit into the...
view full answer... - Roof Rack for 2011 Ford F-150 to Carry Two Thule Hullavator Kayak CarriersSince the max crossbar width the Thule Hullavator part # TH898 can take up is 28-1/2 inches for a roof rack that fits your 2011 Ford F-150 that would work great is the 60 inch bar width Yakima Jetstream roof rack part numbers # Y00426, # Y00146, and # Y06168 which the Hullavator can fit into the top channels of and would easily accommodate both racks. This will install on the roof of the truck though. If you'd prefer a solution for the cap let me know.
view full answer... - Can Four Bike Racks fit Yakima Roof Rack on 2013 Ford F-150 Super Crew Cab?The weight capacity of the roof rack you mentioned that fits your 2013 Ford F-150 Super Crew: Yakima CoreBar Crossbars # Y00422, BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06168 (you will need a quantity of 2) has a weight capacity of 125 lbs. The determining factor in regards to capacity will be whatever is lower, the rack or the capacity of your F-150's roof. The CoreBar Crossbars are 60" and extend past the roof a bit so your fork-mounted bike racks will realistically need to be...
view full answer... - Yakima JetStream Crossbar Roof Rack for 2012 Ford F-150To install your existing Yakima JetStream Crossbars like the 60" # Y00426 (which is the length recommended for your truck) on your 2012 Ford F-150 SuperCrew you will need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06168. It looks like the Towers and Fit Kit that you mentioned are for later model year Ford trucks. I have attached a short video review on this setup below that you can check out as well.
view full answer... - Single Crossbar Recommendation for 2014 Ford F-150 Crew CabFor a single crossbar on your 2014 Ford F-150 Crew Cab, I recommend the Yakima BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06168, BaseLine towers # Y62TR, and Jetstream Crossbar # 8880649. I also recommend the locks # Y07202 for security.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.