Which Yakima Roof Rack Will Fit a 2014 Ford F-150 SuperCrew?

Question

Question:

Id like to install 2 pair of Yakima Towers on my 2014 Ford F150 Supercrew. I did a search for the Roof Rack Feet and it turned up the feet, but the search is not turning up the metal Clips I need to purchase also. Thanks!

asked by: Keith

0

Expert Reply:

The best Yakima roof rack that is currently available for your 2014 Ford F-150 SuperCrew consists of:

60 inch JetStream Crossbars # Y00426
BaseLine Towers # Y28TR
BaseClip Fit Kit # Y06168

expert reply by: Charles S

0

Answer 1

I can't speak of the grade of material the locks would be made from relative to the hooks on the 48" Long Safety Chain, #TCTSCG30-748-04x2 that have been quality tested and approved for this application. Safety chains or cables are required…

view full answer...

Answer 2

Though the Rack'Em Trailer Dolly #RA20 does come with a 1-7/8" ball, there will actually be no issues using it with a larger coupler, like a 2-5/16" one. As you will not be moving with any kind of speed that will cause it to need to be…

view full answer...

Answer 3

Yes, the Rhino-Rack Quick Mount Legs part #RRRLT600 should work just fine with the TS (T-Slot) Rails for Truck Hero Elevate Rack System part #TH65FR.

view full answer...

Answer 4

I recommend using the Rhino-Rack Vortex crossbar system for your 2014 Ford F-150 XLT. This kit includes the following: 59" Vortex Aero Crossbars - Black #RRVA150B-2 or Silver #RRVA150S-2 2500 Series Legs - #RRRLKVA DK Fit Kit - #DK150 Then for a…

view full answer...

Answer 5

You can use the Rhino Rack Load Stops #RRRLH2, which fit the Malone AirFlow2 crossbars on the Malone AirFlow Roof Rack #MPG216. I'd use these paired with some straps like the etrailer Cam Buckle Cinch Straps w/ Buckle Protectors - 1" x…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Which Yakima Roof Rack Will Fit a 2014 Ford F-150 SuperCrew?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching