Custom Fit Roof Rack Kit With INB137 | INK676 | INSUT
Item # IN67TR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (368)
- Q & A (0)
- Videos (7)
- Photos
Inno Roof Rack - IN67TR
- Square Bars
- Crossbars
- 54 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 54" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
Inno Square Load Bars - Black - 54" Long:- Quantity: 2 crossbars
- Weight capacity: 220
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 54" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-B137 Inno Standard Square Steel Load Bars - 54" Long - Black
K676 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Custom Fit Roof Rack Kit With INB137 | INK676 | INSUT
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Review - 2020 Ford Edge
Hi, everyone, it's Evangeline here at etrailer. And today, we'll be taking a look at our Inno roof rack system with the Inno Through Feet, our 57-inch long crossbars, and our Custom Fit Kit for your 2020 Ford Edge. So you have your Ford Edge and you're ready for adventure, or you just wanna carry some extra luggage on top of your vehicle. What if you wanna carry a bike rack or a roof basket or a roof box, or even a kayak What you first need is a roof rack system. So this is the Inno roof rack system with a little bit more overhang and a little bit more height compared to some of your other roof racks. So we're gonna go through the different specs, the different measurements, just to see if this is the right fit for your vehicle, as well as whatever you want to carry with it.
Now, your Ford Edge also has a panoramic glass roof so a big question is, can I still have my crossbars and open the roof So as we open our roof, you can see how as it slides up, we still have plenty of clearance below our crossbars and above our roof. So the clearance with the roof up is gonna be about one and two inches. So if you do have items at clamp around your crossbars, you have about two inches of space for that. So this roof rack is pretty good with giving you roof clearance compared to some other crossbars or roof rack systems. So we'll take some measurements to see exactly how much.
Measuring with the glass roof closed from the top of the roof to the bottom of the crossbar, we hit about 3 1/2 inches of height. So if you have accessories that have clamps that go around the crossbars, that's how much clearance you have for those. Also, if you have cargo and say, ski and snowboards that have larger bindings, that's where a higher roof clearance like that will be handy. Your actual roof height is going to be about five inches tall, or five inches added to the top of your vehicle. Now remember, since you roof does curve, those, the roof clearance and the roof height, will be a little bit different depending on where you measure.
But what's really good to see is even with your shark's fin in the back, whatever you have on top will not interfere with it, but will stay above it. Now the downside to having a naked roof rack is that you don't really get adjustability when it comes to crossbar spread. So measuring from the center of our front crossbar to the center of our rear crossbar, we have about 28 inches of crossbar spread. So for your different accessories, they have fixed mounting clamps. They have fixed areas for where they mount to your crossbars.
That's where the crossbar spread will come in handy to know if it's gonna match your accessories and your crossbars. The crossbar is made of aluminum, but also has this really sleek-looking black powder-coat finish. So that aluminum construction keeps it lightweight but also gives it a really good weight capacity of 165 pounds. One thing to note with that whenever you talk about weight capacity, is you still have to remember your actual roof weight capacity. So add up your roof rack system plus the weight of your accessory, whether it's a box or a basket, plus the weight of your cargo. Total, that makes sure it does not exceed your roof weight capacity. My favorite thing about the new crossbars is how they usually have T-tracks. So the Inno crossbars also has this T-slot in there. And I do like how it's made where you can just push down that rubber strip and then mount your T-track accessory. Much better than, lets say, Rhino Rack, where you have to cut it to size, or Thule where it splits apart every now and then. This is super easy to use. If you have the original roof racks, those we're usually square or round, and they we're really noisy as you drive down the highway. This is the Inno Aero roof rack, or Aero bars, and it's a lot more aerodynamic. Notice how it is shaped. This is so that it can cut down on wind drag and wind noise as you drive down, especially without anything on top of it. Now these are the 57-inch long crossbars, so they give you a little bit more overhang compared to the shorter version. So measuring from the end of the tower to right before the end cap, you have about 2 1/4 inches of actual overhang, which is a little bit more than your 54-inch long crossbars. If you do have more accessories and you want a easier way to reach up onto your vehicle, that's where overhang like this comes in handy. What's holding your crossbar up are these through feet towers. So they have locking cores and you get two keys to access the whole system. So as you can see, this just pops off and allows you to mount and dismount your roof rack system. Now if you do have T-track accessories, you won't need to take these towers off, as you can just take off the nice, shiny end caps. Now let's talk about the fit kit. So that includes the pads that go underneath the towers and the hooks. I highly recommend checking out etrailer.com just to make sure you get the right fit for your specific vehicle. Because if you notice they are, they have these grooves and they conform to the grooves of your own vehicle. So you wanna make sure that you install them properly to take care of your vehicle. Now I do have an install process guide where I go through everything just to show you how to tighten everything down, so let's take a look at that. So the install process can be a little tricky just because this is a naked roof rack, and we have different fit kits with different numbers. But that's what this video is for. I already installed the rear crossbar so that we can install the front crossbar together. We have different hooks, different foot pads, and I'll just guide you through the process of getting your fit kit, your towers, and your crossbars assembled on your Ford Edge. So first, I'm gonna set up the tower with a proper fit kit. So for the front crossbar, we are using the foot pads that have numbers four, two, and five. And then we are gonna place it on the towers like this, with the groove portion facing away from the front. So we just pop that in. Next, we are going to set up our crossbar. So for our crossbar, we have this silver plate. This needs to go inside the tray on the crossbar. Once that's in place, you can bring it up from the bottom. You just slide this through, all the way to the center. Push in this button and continue sliding it until it stops. Then you get your tower. Notice how we have these notches, or these tabs in our tower, as well as this bolt. This is gonna fit into our silver plate, so just place it on top. On the backside of the tower, you have a lever. So you're gonna want to pull that lever so that you can slide the tower through. Now that our towers are attached, we can now put this on our roof. So make sure that the wide portion of your Aero crossbar is facing the front of your roof, and then let's just get it lined up. Since I did not put the hooks on, I can just very gently place this onto my roof and then put the hooks on. So then we have specific measurements on where our towers are going to be placed. For the front tower, we need it to be 8 3/4 inches from your door to the center of the crossbar, or the center of the tower. So just line that up, and now we can put our hook on. Don't forget that you have to tighten down your tower as well to your crossbar that's underneath, just in case you haven't already. But with everything aligned and with this where you want it to be, you just have your hook and your bolt already connected and just fit that into your tower and then hand tighten it down. With both sides clamped on, you then use your torque tool to continue tightening it down. So this is a torque tool, so it's going to click. Do it twice like a gas cap, and that's how you know you have enough tension. When you have all four of your towers tightened down, you can then finally put your end caps onto your crossbars. We'll just pop it in there. And then your doors for your towers. Those go in from the bottom and then flip up towards the top, then you lock it in order to secure it. And with everything locked down and in place, you are done with the install. So my personal thoughts about this roof rack system is if you are going to get the Inno Through Feet, I definitely recommend this configuration with the longer crossbars. You can also get the slightly shorter crossbars with 54-inch long bars. Those only give you about an inch of overhang though, so not as impressive as these. Now if you're looking for something that's a little bit more low profile, more streamlined, you may wanna check out the Inno Flush Feet system. It does sit a little closer to your vehicle though. Something worth considering if you have accessories that clamp around the bars. Another thing you might wanna check out is the Rhino Rack Roof Rack system, which actually is kinda easier to install, but then you get your pros and cons with those too. Definitely check out the different kits right here at etrailer just to see what's the right fit for you and your adventures. But for this one, it gives you great clearance, great overhang, and pretty good weight capacity..
Customer Reviews
Custom Fit Roof Rack Kit With INB137 | INK676 | INSUT - IN67TR
Average Customer Rating: 4.6 out of 5 stars (368 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Charles 05/10/2024
Perfect fit for my car, well packaged and detailed instructions. Easy order process and fast shipping. Will buy from etrailer again. Thank you
by: Ferne03/27/2024
Worked great! Held up a roof top tent all summer. No bending or damage from use.
by: Jay01/23/2024
Ford Focus
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
by: Patrick03/20/2024
Work exactly as described and after a year, still in great condition.
by: Cullen05/19/2023
hyundai Tucson
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
by: David 03/26/2024
Fantastic customer service.
Andrea is great.
Thanks for your help!
by: Adam05/03/2024
Easy to install and very sturdy. Might be more expensive than others on Amazon but trust me spend the money on these.
by: Chris05/26/2024
Pretty bendy, could be a bit more solid. But they do the job
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Christopher K08/25/2023
Package arrived quick one problem thou blue box inside big brown box which held the roof rack bars was damaged and when i opened it up the rubber end caps are missing is it possible u can send them to me i would appreciate it Thank you
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: Russell03/21/2024
My order just arrived this afternoon and I have not yet looked at everything by I am upset over the rails falling out of the box as it is damaged. I will be looking to make sure all parts are contained but so far not thrilled with the condition of the materials as delivered.
by: David 05/08/2024
Perfection!!!
by: Charles 05/10/2024
Perfect fit.
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: Kevin12/31/2023
Very noisy, had to take them off when not in use.
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
25
1002
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Roof Rack Recommendation for a 2003 Chevy Astro VanI wish we had a solution that I could provide for you, but all of the roof racks we offer are designed to fit 2003 Astro van's with raised roof rails. Are you sure you have a totally naked roof? Most likely you have a roof that has raised side rails and would need the Inno Roof Rack that consists of part numbers # INB137 and # INFR.
view full answer... - What is Crossbars Spacing of Inno Roof Rack that Fits 2014 BMW 540 SedanThe distance between the Inno roof rack crossbars on center is 660 mm/26 inches which is pretty close to what you need so the part numbers # INXB130-2, # INXS250, and # INK403 could maybe work, but it depends on how exact you need it to be to 27.5 inches.
view full answer... - Compatability of Inno Bases and Alternative Square Cross Bars for 2017 Chevy SuburbanThe Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4 # INXP are a confirmed fit for your 2017 Suburban when you also use the fit kit # INTR154. The Inno square bars # INB137 confirmed to fit this combination are 54" long x 7/8" tall x 1-1/4" wide. The Malone crossbars are the same 1-1/4 inches by 7/8 inches and can be cut to length, but they are not available outside a kit like # MPG202. The discontinued Thule square load bars can be used as...
view full answer... - Roof Rack that Fits 2014 Mazda 3 and 2014 Subaru LegacyThe best option we have would be a roof rack that is mostly the same that fits your 2008 Mazda 3 and 2014 Subaru Legacy but with different fit kits since the roofs are different. So what you'd want is the Inno Square Roof Rack part # INB137, # INSUT, and # INK851 for the 2014 Subaru Legacy and then use just the different fit kit # INK794 to fit the bars and feet to your Mazda 3.
view full answer... - Inno Square Bar Roof Rack and Fairing that Fits 2005/2006 Scion xBThe correct parts needed to install an Inno roof rack on your 2006 (or 2005) Scion xB would be part # INB137, # INSUT, # INK263. Then for a fairing you would need the # INA262 and you'd be set.
view full answer... - Square Bar Roof Rack for 2017 Ford Escape with Naked RoofI have a similar square bar roof rack that fits your 2017 Ford Escape with the Inno roof rack part # INB137, # INSUT, # INK628 but the Sportrack is not listed as a fit. Even if it was listed though I would not recommend it as it's notoriously not a great fit.
view full answer... - Roof Rack and Kayak Carrier for 2020 Honda Civic HatchbackYes the Inno Roof Rack system consisting of the 54" bars # INB137, Inno Feet for Square Crossbars # INSUT and the custom fit kit # INK684 will fit the 2020 Honda Civic Hatchback. The etrailer J-Style Kayak Carrier also fits this roof rack. It is not just as economical choice. The fold down feature is normally found in higher end carriers and I really like the included straps and anchors. This makes securing your Pelican Trailblazer 100 NXT much easier on your vehicle. I attached a video...
view full answer... - Thule Hullavator Pro Compatibility with 2013 Chevy Equinox with Factory CrossbarsThe Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 will not be directly compatible with your 2013 Chevy Equinox factory crossbars. The crossbars simply do not extend the needed distance beyond the side rails for compatibility but I do have a solution for you. To get compatibility, since you obviously have the raised side rails, I recommend using the Inno Feet for Square Crossbars - Raised Side Rails # INFR and then the Inno Square Crossbars -...
view full answer...
- Roof Rack Fit for 2018 Subaru LegacyWe do have several roof rack fits for your 2018 Subaru Legacy, but the crossbar you mentioned is a fit for a 2016 Chevy Spark. For your Legacy, the most economical option we offer would be square crossbar rack from Inno, which would consist of the following parts: Square profile 54 inch long crossbars, part # INB137 Roof Rack Feet, part # INSUT Vehicle Specific Fit Kit, part # INK439 The downside to square bar roof racks is that they're not very aerodynamic, so they can be pretty noisy....
view full answer... - Does INNO Roof Rack for 2015 Toyota RAV4 Include LocksThe INNO roof rack you referenced part numbers # INB137, # INSUT, and # INK646 is a confirmed fit for your 2015 Toyota RAV4 with a naked roof and it does come with locks built into the knobs of the feet that secure the bars to your vehicle roof. The crossbar spread is the distance measured on center that the bar will be on your roof when the system is installed. With this style of roof rack the bars have to be set in one position and can't be moved forward or backwards.
view full answer... - Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4DrWe do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
view full answer... - Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to VehicleThe door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
view full answer...
- 2011 Ford Flex Roof Rack And Roof Basket CompatibilityThe Inno roof rack consisting of the Inno Square Crossbars - Steel - Black - 54" Long - Qty 2 # INB137 and Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 # INFR is confirmed to fit your 2011 Ford Flex with factory side rails. The Curt Roof Mounted Cargo Basket # C18115-117 will work with this roof rack. The crossbars of your roof rack must be spaced between 22 and 50 inches apart on center for a proper fit. You will want to make sure you stay within the weight limits...
view full answer... - What are the Dimensions of the Thule Square BarsI went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
view full answer... - Roof Racks for 2014 Lexus LS 460 with Shorter CrossbarsI can't find any reference to Rhino Rack crossbars that fit your 2014 Lexus LS460L so we can't verify a Rhino Rack roof rack for your vehicle. Our most economically priced option that fits your vehicle is the Inno Square Bar Rack part numbers # INB137, # INSUT, # INK771 which the crossbars of this kit are 54 inches long. If instead you were looking for the shortest crossbar option you'd instead want the Inno Aero Bar roof rack part # INXB115-2, # INXS200, # INK771.
view full answer... - Roof Rack Crossbars for 2014 Toyota RAV4The Toyota RAV4 EV is an all-electric version of the RAV4 produced mostly for the California market from 2012 until September of 2014. This is not a hybrid, but a 100-percent electric vehicle. Our roof rack fits for the 2014 RAV4 include both this electric and the standard versions. You can use the linked page to see all roof racks for the car. At the top of the page simply click on the type of roof configuration you have - either raised factory side rails or a completely bare roof -...
view full answer... - Is it Possible to Haul a Kayak and Paddleboard Together on 2007 Nissan Murano?In order to transport a kayak and paddleboard, you'll need to have a roof rack. If your 2007 Nissan Murano has the factory-installed side rails on the roof, I recommend the Inno Aero, which includes the rack's feet, # INXS150, and crossbars, # INXB138-2. If your Murano has a naked roof, without side rails, I recommend using the Inno Custom Fit Kit, # INK312, feet, # INSUT, and crossbars, # INB137. With a roof rack installed, you can then haul your paddleboard with the Rhino-Rack SUP Pads...
view full answer... - Solutions for Carrying Spare Tire on 2009 Toyota RAV4 SportFrom what I understand, the 2009 RAV4 Sport was originally equipped with run-flat tires which explains why they typically didn't come with a spare tire or a good place to store one. The Buyer's Products # 3375201010 spare tire carrier is a universal fit item, so Buyer's Products doesn't offer specific mounting instructions or guidance. It would be up to the end user to determine the best placement and do the measuring to determine if the tire and mount would fit in the desired location....
view full answer... - Troubleshooting Bowed Inno Roof Rack on a 2015 Ford FusionIt looks like you have the spacing correct for the Inno Roof Rack # INB137, # INSUT, and # INK860 on your 2015 Ford Fusion, but I would just double check that the feet are not binding and that the base carrier has been installed correctly. You may also need to adjust your towers (if that can be done) to help get your square bars to sit level.
view full answer...
- Inno Gutter Mount Roof Rack for a 2001 Toyota Tundra with GuttersI have a great option for you from Inno since your 2001 Toyota Tundra has gutters to mount the roof rack. You will want to use the Inno Feet for Square Crossbars # INSD. These feet are a gutter mount style, so they will attach directly to the gutters on your Tundra and allow you to use the Inno Square Crossbars # INB137.
view full answer... - Will the Inno Board Locker Fit a 2013 Kia Optima? The Inno Board Locker # INA744 will fit your 2013 Kia Optima as long as your vehicle has a roof rack system with crossbars. The Inno Board Locker will fit crossbars with maximum dimensions of 3-1/2 inches wide x 1-1/8 inches tall. In order to confirm if the board locker is compatible with your crossbars, I recommend measuring those dimensions. If you do not have a crossbar system on your bare-roof 2013 Kia Optima, I recommend the following compatible roof-rack system: - Inno Square...
view full answer... - Inno Roof Rack Compatibility For A 2019 Toyota RAV4 Yes, the Inno Feet for Square Crossbars # INXP, Custom Fit Kit for Inno Roof Rack Feet # IN33FR, and the Inno Square Crossbars # INB117 are all a confirmed fit for your 2019 Toyota RAV4. Yes, you could swap the 46" # INB117 out for the 50" # INB127 or 54" # INB137 as well since the feet simply clamp down on the bar.
view full answer... - Parts Needed to Install Inno Square Bar Roof Rack on 2018 Ford EdgeTo install an Inno square bar roof rack on your 2018 Ford Edge you simply need part numbers # INB137, # INSUT, and # INK676.
view full answer... - Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai TucsonA great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
view full answer... - Recommended Roof Rack for a 2014 Mazda CX-5 With a Naked RoofYou almost have everything, you're just going to need a fit kit # INK758. This kit will allow you to mount the Inno Feet for Square Crossbars # INSUT to your 2014 Mazda CX-5. The # INSUT crossbars you mention have a dynamic weight capacity of 220 lbs, measures 50" long, 7/8" tall, and is 1 1/4" wide.
view full answer... - Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting PointsFor your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
view full answer... - Will Inno Square Bar Roof Rack Fit 2015 Honda Fit and Work Well to Carry 2 KayaksThe Inno Square Bar Roof Rack # INB127, # INSUT, # INK876 that you referenced is confirmed to fit your 2015 Honda Fit. This roof rack uses custom fit pads and clamps to provide a secure fit for the roof rack on the naked roof of your Fit. The clamps are designed specifically to fit the curves of your vehicle's doorjambs. The molded pads that install on the bottom of the roof rack feet help to protect your roof from scratches and abrasions. Anytime an accessory installs with direct contact...
view full answer... - What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare RoofFor your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars # INSUT. Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and the correct kit for your '19 CX-5 is the Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497.
view full answer... - Recommended Roof Rack for a 2004 VW BeetleThe only available roof rack for a 2004 Volkswagen New Beetle (Hard Top Only) is the Inno Square Crossbar System part # INB127, part # INSUT, part # INJK, and part # INK775. This is a great system which will accept nearly all roof rack mounted accessories. It installs via clips which attach to the door jamb and it comes with locks for security.
view full answer... - Adding A Thule SquareBar Roof Rack To A Fiberglass Camper Shell Hi Shane, Typically with camper shells we recommend installing a Thule Top Tracks for Roof Racks on the roof of the shell so that you can install a roof rack and be able to slide it around in the tracks to fit your various needs. We offer these tracks in the following sizes: 42" # THTP42 54" # THTP54 60" # THTB60 From there you can use fit kit # THKIT3101 and Rapid Podium Feet for Thule Crossbars # TH460R to connect your SquareBars.
view full answer... - How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
view full answer...
- Recommended Bike Carrier Options for 2015 Hyundai SonataThe design of your 2015 Hyundai Sonata does not lend itself to trunk-mount type bike racks. In fact both Thule and Yakima do not recommend any of their trunk racks for your Sonata. So, your best option is to install a Class I hitch and use a hitch-mount bike rack. However, note that a Class I hitch can handle the weight of only 2 bikes. The hitch I recommend for your Sonata is the Draw-Tite # 24965 because it installs without drilling and includes all the required hardware to bolt it on. You...
view full answer... - Roof Rack Fit For 2013 Honda CrosstourI was able to find a roof rack that fits your 2013 Honda Crosstour, and in fact there are two, both from Inno. One is an aero bar roof rack and the other is a square bar rack. I'll list out the options for both, and I did verify these fits directly with the manufacturer for you. Aero Crossbar Roof Rack - Inno Aero Crossbars # INXB123-130 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK587 Square Crossbar Roof Rack - Inno Square Crossbars # INB127 - Inno Feet for...
view full answer... - Roof Rack for a 2005 Toyota Matrix with Naked RoofThe fit information is correct. SportRack does not have a roof rack fit for any models of the Toyota Matrix. The most cost effective roof rack we have available for your 2005 Toyota Matrix with a naked roof is the Inno # INB127 crossrails, # INSUT feet, and # INSU-K5 fit kit. This kit clamps securely to the roof and the standard round bars work with most accessories.
view full answer... - Will the Swagman Trailhead 3 Bike Rack Fit on a 2003 Acura RSX with a Class I Trailer HitchYou can use the Swagman Trailhead 3 Bike Rack, # S63365, with a Class I hitch on your 2003 Acura RSX, just keep in mind that you will be limited to carrying two bikes due to the capacity of the hitch. It is not recommended to carry more than 2 bikes at a time on a Class I hitch because of the additional leverage that is applied on the hitch by 3 or more bikes mounted further away from the hitch. It is similar to adding a pipe on the end of a wrench to gain additional torque to loosen...
view full answer... - Roof Rack Recommendation for 2000 Isuzu Trooper to Install Rola Roof Cargo BasketEasiest would be by first installing a custom fit roof rack for the vehicle. For that you would want the Inno part # INB127, # INSUT, and # INK115. Once that is installed the Thule Canyon XT cargo basket part # TH859XT that you referenced would fit and work well.
view full answer... - Inno Roof Rack Recommendation for 2010 Nissan AltimaThe experience you described with the Sportrack is not uncommon and is why I never recommend them, for your 2010 Nissan Altima I would recommend the Inno Square bar roof rack part numbers # INB117, # INSUT, and # INK116 which we know fits really well and would not interfere in any way with your doors.
view full answer... - Roof Rack that Fits 2014 Mazda 3 and 2014 Subaru LegacyThe best option we have would be a roof rack that is mostly the same that fits your 2008 Mazda 3 and 2014 Subaru Legacy but with different fit kits since the roofs are different. So what you'd want is the Inno Square Roof Rack part # INB137, # INSUT, and # INK851 for the 2014 Subaru Legacy and then use just the different fit kit # INK794 to fit the bars and feet to your Mazda 3.
view full answer... - Will the Curt Roof Cargo Basket # C18115 Fit on a 2010 Toyota FJ CruiserTo determine if the Curt Roof Mounted Cargo Basket, # C18115, will fit your 2010 Toyota FJ Cruiser, you will want to look at the roof of your vehicle. Your FJ Cruiser could have come equipped three ways, with a complete factory roof rack with factory crossbars, only factory raised side rails or with a bare roof. If your FJ Cruiser came with a complete roof rack, then this cargo basket will fit on your vehicle. We have an FJ Cruiser with a factory roof rack on our lot, so I measured the...
view full answer... - Inno Square Bar Roof Rack and Fairing that Fits 2005/2006 Scion xBThe correct parts needed to install an Inno roof rack on your 2006 (or 2005) Scion xB would be part # INB137, # INSUT, # INK263. Then for a fairing you would need the # INA262 and you'd be set.
view full answer... - Square Bar Roof Rack for 2017 Ford Escape with Naked RoofI have a similar square bar roof rack that fits your 2017 Ford Escape with the Inno roof rack part # INB137, # INSUT, # INK628 but the Sportrack is not listed as a fit. Even if it was listed though I would not recommend it as it's notoriously not a great fit.
view full answer... - Can I Use the Thule Rapid Traverse Feet # TH480R On My 2013 Chevy Volt with a Bare Roof? I have a great roof rack solution for you. Unfortunately, I confirmed with Thule that they currently do not have any customized roof rack components or setups that work with your 2013 Chevy Volt (with or without the Thule Rapid Traverse Feet # TH480R). However, with that being said, Inno makes a great system that fits your bare roof. For that system, you need the following components: - Inno Square Crossbars - Steel - Black - 50" Long # INB127 - Inno Feet for Square Crossbars - Naked...
view full answer... - Kayas Carriers for Naked Roof of 2016 Scion iMSome of the kayak carriers we offer can be used without having to install a roof rack on the vehicle. This can save not only a substantial amount of money but also some of the car's roof weight-carrying capacity. Everything on the roof - kayaks, kayak carriers and a roof rack - all count against the car's roof weight capacity. If your two kayaks together happen to weigh close to the car's roof limit, then the light weight foam block carriers like # MPG152 could be your best option. I linked...
view full answer... - Roof Rack Recommendation for a 1995 Honda CivicFor your 1995 Honda Civic 3 door hatchback the Sportrack roof rack part numbers # SR1003 and # SR1116 is a confirmed fit. However, this is a semi-custom fit roof rack that doesn't always fit every vehicle perfectly since it's designed to fit as many vehicles as possible. A much better option would be the INNO part numbers # INB107, # INSUT, and # INJK, and # INK130. This is a custom fit rack that would fit much better.
view full answer...
- Recommended Rooftop Kayak Carrier Systems for 2013 Chevy SparkFoam block style kayak carriers like the Rightline Gear # RL100K10 are a great option in certain conditions, such as when you're travelling a short distance through town to get to your local pond, but if you intend to transport your kayak at 75-mph on the interstate for hundreds of miles, then a roof rack and different carrier are called for. The Rightline kayak carrier also works great in cases where a car's roof weight capacity is pretty close to the kayak's weight. Since you cannot...
view full answer... - Roof Rack and Kayak Carrier for 2020 Honda Civic HatchbackYes the Inno Roof Rack system consisting of the 54" bars # INB137, Inno Feet for Square Crossbars # INSUT and the custom fit kit # INK684 will fit the 2020 Honda Civic Hatchback. The etrailer J-Style Kayak Carrier also fits this roof rack. It is not just as economical choice. The fold down feature is normally found in higher end carriers and I really like the included straps and anchors. This makes securing your Pelican Trailblazer 100 NXT much easier on your vehicle. I attached a video...
view full answer... - Roof Rack Recommendation for 2007 Toyota Camry for Cargo CarrierThe Sportrack roof rack part # SR1002 has a 130 lb weight capacity and has bar dimensions that will easily be compatible with a cargo carrier. Since this is a semi-custom roof rack that notoriously doesn't fit vehicles very well I'd recommend a fully custom rack like the Inno roof rack part numbers # INB127, # INSUT, and # INK220 for your 2007 Toyota Camry.
view full answer... - SportRack Semi-Custom Roof Rack for Naked Roofs # SR1005 Compatibility With 2005 PontiacThe SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 45-1/2" Long # SR1005 is unfortunately not a fit for a 2005 Pontiac. However, I do have a solution for you if you have a 2005 Sunfire. The Inno with short roof adapter kit system # INB117, # INSUT, # INJK, # INK153 is a confirmed fit for your 2005 Sunfire. What's neat about this rack is that it includes all the locks already and has a square bar design which is the most compatible with aftermarket accessories. If...
view full answer... - Flush Aero Bar Roof Rack Recommendation for 2017 Lincoln MKX with Naked RoofFor an aeroblade style roof rack confirmed as a fit for your 2017 Lincoln MKX with a naked roof the Inno roof rack of part numbers # INXB115-2, # INXS200, and # INK676 would be what you need. This is a flush bar style roof rack which means the crossbars do not extend past the feet at all so the bars match the width of your roof.
view full answer... - Parts Needed to Install Inno Square Bar Roof Rack on 2018 Ford EdgeTo install an Inno square bar roof rack on your 2018 Ford Edge you simply need part numbers # INB137, # INSUT, and # INK676.
view full answer... - Recommended Low-Profile Roof Rack for 2018 Lincoln MKX with Naked RoofA great option for a roof rack on your 2018 Lincoln MKX is the Inno Roof Rack because it is low-profile with a refined look as well as being a highly effective rack. This roof rack consists of the following parts: - Inno Aero Crossbars # INXB115-2 - Inno Flush Feet for Aero Crossbars # INXS200 - Custom Fit Kit for Inno # INK676 This roof rack will look graceful atop your '18 MKX due to the aerodynamic shape of the crossbars and the fact that they do not extend past the sides of your Lincoln;...
view full answer...
- 2017 Ford Escape Roof Rack Recommendation for Use with Thule Pro Ride Roof RackYour Thule Pro Ride bike rack part # TH598004 is designed to basically fit all crossbar shapes so then for a roof rack for your 2017 Ford Edge the roof rack with the longest crossbars which will make carrying all three of the bikes as easy as possible the Inno rack part numbers # INXB145-2, # INXS250, and # INK676 would be your best option as this is an aero bar rack with 57 inch long crossbars.
view full answer... - Parts Needed to Install Existing Thule Square Crossbars on a 2016 Ford Edge SportIt sounds like you have the older version of the Thule square crossbars that are solid all the way around as opposed to having the slits on either end that the feet fit into. If this is the case the newer Thule roof rack parts aren't compatible but we've found that the Inno brand uses the same sized square crossbars so you can use their parts instead and continue to utilize your Thule crossbars. The parts that fit your 2016 Ford Edge are the following: 54" Square Crossbars - # INB137 Feet...
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2018 Lincoln MKXThe roof rack I recommend for your 2018 MKX with a naked roof is the Inno Aero Bar roof rack part numbers # INXB115-2, # INXS200, and # INK676 because this custom fit rack has aero bars which are very quiet, installs very easily, and we know it fits and works well on the MKX as we had the chance to install the rack on one. Check out the linked install video I attached for this rack to see us walk through the install of the rack on a 2015 MKX. Then for a kayak rack I recommend the Yakima...
view full answer...
- Roof Rack for 2016 Lincoln MKX with Naked Roof and Panoramic SunroofThere is one high-quality roof rack that will work on your 2016 Lincoln MKX with a naked roof and panoramic sunroof from Inno, which consists of: - Inno Aero Crossbars # INXB138-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit for Inno # INK676 This roof rack uses aero crossbars that measure 3-1/8" wide x 1-1/8" tall which are the same dimensions as Thule bars such as the WingBar Evo so your Thule cargo box will fit. The fit kit does have pads to protect your the surface...
view full answer...
- Placement of my Inno Roof Rack System on my 2017 Lincoln MKXWhen installing the Inno Aero Crossbars part # INXB138-2, Inno Through Feet for Aero Crossbars part # INXS250 and the Custom Fit Kit for Inno Crossbars part # INK676 we must follow the installation instructions exactly. This is where the rack was designed to to be installed and tested for performance. Mounting it in any other location would void the warranty and may lead to damage occurring to your 2017 Lincoln MKX.
view full answer... - Does INNO Roof Rack For 2016 Ford Edge fit With Vista RoofYes, the Inno Roof Rack that consists of part numbers # INXS200, # INXB115-2, and # INK676 is a confirmed fit for your 2016 Ford Edge with a naked Vista roof.
view full answer... - Inno Square Bar Roof Rack for 2016 Lincoln MKX with Bare Roof The Inno Square Bar Roof Rack for your 2016 Lincoln MKX with the bare roof, which consists of # INB137 for the two 54 inch Square Crossbars, # INSUT for the Inno Feet, and # INK676 for the Fit Kit, is a great choice. This will provide you with an economical yet durable and versatile setup that will work perfectly to secure your existing Yakima Rocket Box or other accessories such as a bike rack or kayak carrier you may want to mount in the future. The mounting feet and clamps allow for...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.