Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y94TB
Our Price: $688.80
Confirmed to Fit
2001 Chrysler PT Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (303)
- Q & A (0)
- Videos (104)
- Photos
Yakima Roof Rack - Y94TB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Black
- Yakima
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 1 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y94TB
Average Customer Rating: 4.8 out of 5 stars (303 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Nelson06/26/2023
Ford
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Jerry 07/29/2023
I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.
by: Aaron 02/10/2024
Perfect match
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Ric 07/22/2023
Honestly went back to etrailer after buying something i couldnt find on the big A before because their support was so good and delivery speed was soo fast.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Hogan06/09/2023
I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: William 01/11/2024
Shipment received, as ordered! Thanks again to Bryce D., for assistance.
by: Oliver05/30/2021
BMW
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Earthdog Mom05/11/2023
Quality product, timely shipping, transported with care. Packaging received fully intact with no damage.
Thank you etrailer for yet another great ordering experience!
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
25
650
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer...
- Roof Rack Recommendation for Carry Thule Motion XT Box on a 2023 Lexus GX 460It does look like the OEM roof rack kit on your 2023 Lexus GX 460 is going to sit really close to your roof so I recommend replacing that with an aftermarket system to ensure you have enough clearance to your roof for the Thule Motion XT Rooftop Cargo Box # TH629706 to fit. I recommend using the Yakima JetStream system which includes the following parts: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y96AR - Lock Core Kit # Y07204 (optional)
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer...
- Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer...
- How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer...
- Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee LaredoI'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier # RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - How to Add Crossbars to a 2024 Honda CR-V w/ Flush Roof RailsYes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - Wind Fairing To Reduce Noise on 2019 Honda PilotSorry to hear that, noise typically isn't a major issue with the JetStream bars # Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for Roof Racks - 34" Long # Y05016 -Yakima WindShield Fairing for Roof Racks - 40" Long # Y05017 -Yakima WindShield Fairing for Roof Racks - 46" Long # Y05018 -Yakima WindShield Fairing for Roof Racks - 52" Long # Y05019 You will need to measure...
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - What Is The Difference Between T-Slot Mounting Hardware 8860085 And Y03098Yes, the Replacement T-Slot Mounting Hardware for Yakima FatCat and Whispbar Ski Carriers # 8860085 you mention will work with your Yakima Fat Cat 6 Locking Rooftop Ski and Snowboard Carrier # Y03088 (INACTIVE). The difference between # 8860085 and # Y03098 is the primary height at which they sit. The Yakima FatCat 6 will still operate normally, and will all you to channel mount your FatCat 6 into your aero style crossbars like the Yakima JetStream Crossbars # Y00425. For a low profile...
view full answer... - Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy CruzeThe difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
view full answer... - Recommended Roof Rack for a 2023 Kia Niro PHEV We have a set up that will allow you to add crossbars, however I checked with our vendors and did not see a hitch available for the 2023 Kia Niro PHEV and there's no indication that one is coming. Nobody made one for the 2022 either so it's not looking like there's going to be one. To add a set of crossbars to your Kia Niro, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine...
view full answer... - Correct Yakima Roof Rack Fitment for a 2021 Honda PassportTo install a Yakima roof rack on your 2021 Honda Passport you need at least 50" JetStream Crossbars # Y00425 and the TimberLine Towers # Y33TR or the Yakima TimberLine FX Roof Rack # Y78UV that has ore or a clamp style connection as opposed to the straps. If you don't have either of these setups then I can't recommend using an alternative setup even if you're able to get it to fit. A while back we had someone fit a roof rack to a vehicle and while it technically "fit" and stayed put,...
view full answer... - Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer... - Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. TopperYou will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
view full answer...
- 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super DutyWe can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer... - Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
view full answer...
- Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
view full answer... - Roof Rack For 2016 Honda Pilot For Two Thule HullavatorsI am going to assume your 2016 Honda Pilot has flush side rails and that you can remove your factory roof rack, and if so there is a way to use a pair of the Thule Hullavator Pro # TH898, but the ShowDown is far too wide to put on next to the Hullavator. If you're okay using a pair of Hullavators, the roof rack you need for your '16 Pilot is the following, from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 19 # Y00245 You can lock the roof rack...
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer... - How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer... - Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - What Yakima Landing Pad Do I Need For My 2021 Subaru OutbackYour 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer... - 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Roof Rack for Installing Two Thule Hullavator Kayak Carriers on Roof of 2020 Toyota RAV4By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind that each set of Hullavators weighs about 40 lbs, and most roof rack setups have a capacity of 165 lbs. This leaves you 80-85 lbs of capacity for the 2 kayaks in order to not overload the roof rack. If the combined weight of your Kayaks is less than 85 lbs, you...
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Roof Rack For 2022 Lexus GX 460 For Thule HullavatorSure thing, we can get your 2022 Lexus GX 460 set up with a roof rack for your Thule Hullavator # TH898, and what you'll need is a rack from Yakima. The correct parts for your Lexus are the following: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 30 # Y25ZR I also recommend adding locks to protect your roof rack, keeping it secure on your Lexus. You can add those with the Yakima Same Key System (SKS) Lock...
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - Recommended Roof Rack Option For A Small Cargo Trailer The closest option we'd have to mount on your trailer's roof would be the Yakima 42" Tracks for Roof Racks # Y01126 which would allow you to install feet and crossbars to haul your accessories. This is the smallest track we currently have available, at 42" in length, so you'll want to verify these will fit first. If so you'll need the following rack components: Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (x2) Replacement Yakima Control Tower for Factory-installed...
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Does Yakima Landing Pad 1 Fit Yakima 54 HD Tracks for Roof Racks Y64MRYour Yakima Landing Pad 1 part # Y00221 is the correct Landing Pad for the Yakima Tracks like the part # Y64MR that you referenced.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Is There Yakima Landing Pad that Fits Thule Roof Rack TracksYes, the Yakima Landing Pad 1 part # Y00221 does fit the Thule tracks like part # THTP54 that you referenced.
view full answer... - Converting Yakima BedRock HD Crossbars To Work With RetraxOne XR Tonneau On a 2017 Nissan TitanYou will be able to adapt the bars from the Yakima BedRock HD Truck Bed Rack # Y01160-59 to fit the RetraxONE XR Hard Tonneau Cover # RTT-60752 for the 6-1/2' bed on your 2017 Nissan Titan. Since the towers with the BedRock require you to mount inside the bed rails they will prevent the cover from fitting. The RetraxONE XR comes with t-slot accessory rails that you will be able to fit four of the SkyLine Tower # 8880614 using 2 sets of Landing Pads # Y00221. You will then be able to move...
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following: - Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028 You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Mounting Yakima LockNLoad # Y05049 Directly to Factory Tracks on 2017 Mercedes Sprinter 2500You will be able to mount the Yakima LockNLoad Platform 84" Long x 62" Wide # Y05049 directly to your factory tracks on your 2017 Mercedes Sprinter 2500 given that your tracks are spaced close enough together to accommodate for the 62" width of the platform. I confirmed with Yakima that your tracks need to be between 39” - 50.5" apart in order to accommodate the towers. I went ahead and attached a diagram that shows this measurement. I recommend measuring your track spread in order to make...
view full answer...
- What Parts do I Need to Add a Third Yakima RoundBar to My ARE Camper Shell with Tracks?In addition to the x2 Yakima Control Towers # Y8890027, you also need the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 in order to attach the towers to the tracks. If you need an additional crossbar to complete the setup, we unfortunately only sell the round bars in pairs of 2. Those are the Round 48" CrossBars for Yakima Roof Rack # Y00408 or the Round 78" CrossBars for Yakima Roof Rack # Y00411. If you need a great option for a roof top tent, I recommend the Yakima SkyRise...
view full answer... - Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX SeriesThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
view full answer... - Can Yakima Control Tower with Landing Pad 1 Fit Yakima Roof Rack TracksThe Yakima Control Towers like the part # Y8890027 (QTY 1) can fit the Yakima tracks like you mentioned with the Landing Pad 1 part # Y00221. This would work to use the Yakima Round Bars like # Y00409 which is a pair of 58 inch bars.
view full answer... - Can The Side Rails On The Pace Edwards Bedlocker Be Upgraded To The Explorer Rails?The Replacement Explorer Rails for Pace Edwards Bedlocker Hard Tonneau Cover # PE39CV are the replacement rails for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # 311-BLD2336, which only fits select years of the Dodge Ram 1,500, 2,500, and 3,500, and not your 2020 Ford F-350 unfortunately. The only way that you could get the explorer rails for your 2020 Ford F-350, is to purchase and entire new Bedlocker system with the rails already installed. If you're interested, we do...
view full answer... - Is Yakima Landing Pad 1 Compatible With Rhino-Rack RTC-Style Roof Rack Tracks - Channel MountYes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part # RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Two pair of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204, and the correct sized Yakima crossbars. The...
view full answer... - Parts Needed To Attach Yakima Crossbars To A Pace Edwards Ultra Groove Tonneau CoverTo connect some Yakima crossbars to the T-Tracks of your Pace Edwards UltraGroove Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # 311-KRTA10A38 you purchased you'll need the follow items: First you'll need two of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221. These will fit the T-Tracks of the cover and will give an attachment point for the feet of the crossbars. For the feet you'll need the SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - How to Install Yakima Skyline Tower Setup on CamperThe only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
view full answer... - Can Yakima or Thule Crossbars Fit with Rhino-Rack RT Track SystemWe have confirmed in the past that the Yakima Landing Pad 1 will fit the RT style tracks from Rhino-Rack so you can definitely use a Yakima setup for your application (which I would recommend over Thule even if we knew that Thule would work). You will need to following parts for a whole roof rack setup on your 2006 Dodge Sprinter 2500: Rhino-Rack RT-Style Roof Rack Tracks - # RRRTV208 Landing Pad 1 - # Y00221 (you need 2 of this kit) SkyLine Towers - # Y53TR Same Key System - # Y07204...
view full answer... - Will Yakima Q-Towers Work with Thule Roof Tracks on Camper ShellIt sounds like you're trying to reuse an old Yakima Q-Tower System on a camper shell with roof tracks installed. If that's the case then I hate to be the bearer of bad news, but this just simply isn't possible with off the shelf parts. That said, I do have a way for you to use your old round crossbars, you'd just need the Replacement Yakima Control Tower for Factory-Installed Tracks part # Y8890027 (QTY. 4) and Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 (QTY.2). These...
view full answer... - Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
view full answer... - T-Track Accessory Options for Pace Edwards UltraGroove Tonneau CoverThere are a variety of options like the Yakima OverHaul HD which comes with 68" Crossbars # Y01151-5855 or 78" Crossbars # Y01151-5955 or by using a standard roof rack setup like the Yakima JetStream bar system: 60" JetStream Crossbars - # Y00426 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you need 2 sets of this) If you can let me know what the year/make/model and bed size is for your pickup I can let you know what the best crossbar length would be or even what Pace Edwards ladder...
view full answer... - Yakima Tracks and Parts to Use Round Crossbars on 2020 Jeep Wrangler UnlimitedI'll be happy to help you out with the parts to add tracks to your 2020 Jeep Wrangler Unlimited! In addition to your Yakima round crossbars you'll need the following: 60" Tracks - # Y01135 (comes with mounting hardware) Legs - Control Tower # Y8890027 (you need 4) Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional)
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - Recommended Roof Rack Option For A Small Cargo Trailer The closest option we'd have to mount on your trailer's roof would be the Yakima 42" Tracks for Roof Racks # Y01126 which would allow you to install feet and crossbars to haul your accessories. This is the smallest track we currently have available, at 42" in length, so you'll want to verify these will fit first. If so you'll need the following rack components: Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (x2) Replacement Yakima Control Tower for Factory-installed...
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Does Yakima Landing Pad 1 Fit Yakima 54 HD Tracks for Roof Racks Y64MRYour Yakima Landing Pad 1 part # Y00221 is the correct Landing Pad for the Yakima Tracks like the part # Y64MR that you referenced.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Is There Yakima Landing Pad that Fits Thule Roof Rack TracksYes, the Yakima Landing Pad 1 part # Y00221 does fit the Thule tracks like part # THTP54 that you referenced.
view full answer... - Converting Yakima BedRock HD Crossbars To Work With RetraxOne XR Tonneau On a 2017 Nissan TitanYou will be able to adapt the bars from the Yakima BedRock HD Truck Bed Rack # Y01160-59 to fit the RetraxONE XR Hard Tonneau Cover # RTT-60752 for the 6-1/2' bed on your 2017 Nissan Titan. Since the towers with the BedRock require you to mount inside the bed rails they will prevent the cover from fitting. The RetraxONE XR comes with t-slot accessory rails that you will be able to fit four of the SkyLine Tower # 8880614 using 2 sets of Landing Pads # Y00221. You will then be able to move...
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following: - Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028 You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Mounting Yakima LockNLoad # Y05049 Directly to Factory Tracks on 2017 Mercedes Sprinter 2500You will be able to mount the Yakima LockNLoad Platform 84" Long x 62" Wide # Y05049 directly to your factory tracks on your 2017 Mercedes Sprinter 2500 given that your tracks are spaced close enough together to accommodate for the 62" width of the platform. I confirmed with Yakima that your tracks need to be between 39” - 50.5" apart in order to accommodate the towers. I went ahead and attached a diagram that shows this measurement. I recommend measuring your track spread in order to make...
view full answer... - What Parts do I Need to Add a Third Yakima RoundBar to My ARE Camper Shell with Tracks?In addition to the x2 Yakima Control Towers # Y8890027, you also need the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 in order to attach the towers to the tracks. If you need an additional crossbar to complete the setup, we unfortunately only sell the round bars in pairs of 2. Those are the Round 48" CrossBars for Yakima Roof Rack # Y00408 or the Round 78" CrossBars for Yakima Roof Rack # Y00411. If you need a great option for a roof top tent, I recommend the Yakima SkyRise...
view full answer... - Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX SeriesThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
view full answer... - Can Yakima Control Tower with Landing Pad 1 Fit Yakima Roof Rack TracksThe Yakima Control Towers like the part # Y8890027 (QTY 1) can fit the Yakima tracks like you mentioned with the Landing Pad 1 part # Y00221. This would work to use the Yakima Round Bars like # Y00409 which is a pair of 58 inch bars.
view full answer... - Can The Side Rails On The Pace Edwards Bedlocker Be Upgraded To The Explorer Rails?The Replacement Explorer Rails for Pace Edwards Bedlocker Hard Tonneau Cover # PE39CV are the replacement rails for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # 311-BLD2336, which only fits select years of the Dodge Ram 1,500, 2,500, and 3,500, and not your 2020 Ford F-350 unfortunately. The only way that you could get the explorer rails for your 2020 Ford F-350, is to purchase and entire new Bedlocker system with the rails already installed. If you're interested, we do...
view full answer... - Is Yakima Landing Pad 1 Compatible With Rhino-Rack RTC-Style Roof Rack Tracks - Channel MountYes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part # RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Two pair of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204, and the correct sized Yakima crossbars. The...
view full answer... - Parts Needed To Attach Yakima Crossbars To A Pace Edwards Ultra Groove Tonneau CoverTo connect some Yakima crossbars to the T-Tracks of your Pace Edwards UltraGroove Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # 311-KRTA10A38 you purchased you'll need the follow items: First you'll need two of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221. These will fit the T-Tracks of the cover and will give an attachment point for the feet of the crossbars. For the feet you'll need the SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - How to Install Yakima Skyline Tower Setup on CamperThe only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
view full answer... - Can Yakima or Thule Crossbars Fit with Rhino-Rack RT Track SystemWe have confirmed in the past that the Yakima Landing Pad 1 will fit the RT style tracks from Rhino-Rack so you can definitely use a Yakima setup for your application (which I would recommend over Thule even if we knew that Thule would work). You will need to following parts for a whole roof rack setup on your 2006 Dodge Sprinter 2500: Rhino-Rack RT-Style Roof Rack Tracks - # RRRTV208 Landing Pad 1 - # Y00221 (you need 2 of this kit) SkyLine Towers - # Y53TR Same Key System - # Y07204...
view full answer... - Will Yakima Q-Towers Work with Thule Roof Tracks on Camper ShellIt sounds like you're trying to reuse an old Yakima Q-Tower System on a camper shell with roof tracks installed. If that's the case then I hate to be the bearer of bad news, but this just simply isn't possible with off the shelf parts. That said, I do have a way for you to use your old round crossbars, you'd just need the Replacement Yakima Control Tower for Factory-Installed Tracks part # Y8890027 (QTY. 4) and Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 (QTY.2). These...
view full answer... - Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
view full answer... - T-Track Accessory Options for Pace Edwards UltraGroove Tonneau CoverThere are a variety of options like the Yakima OverHaul HD which comes with 68" Crossbars # Y01151-5855 or 78" Crossbars # Y01151-5955 or by using a standard roof rack setup like the Yakima JetStream bar system: 60" JetStream Crossbars - # Y00426 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you need 2 sets of this) If you can let me know what the year/make/model and bed size is for your pickup I can let you know what the best crossbar length would be or even what Pace Edwards ladder...
view full answer... - Yakima Tracks and Parts to Use Round Crossbars on 2020 Jeep Wrangler UnlimitedI'll be happy to help you out with the parts to add tracks to your 2020 Jeep Wrangler Unlimited! In addition to your Yakima round crossbars you'll need the following: 60" Tracks - # Y01135 (comes with mounting hardware) Legs - Control Tower # Y8890027 (you need 4) Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional)
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.