Rubber Hollow Bulb Seal for RV Slide Out - Press On - 25' Long x 1-1/4" Wide

Video Transcript for Review of etrailer RV Slide Out Parts - 25 Foot Rubber Press On Hollow Bulb Seal - CS53VR

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this rubber press-on hollow bulb seal. This is going to allow you to replace your old or worn out bulb seal on your RV's slide out. Now obviously when you're looking for a replacement you want to find one that's going to be about the same size as your original. So our bulb here you can see is about 5/8 of an inch tall. Our width, we're looking about an inch and 1/4 there.

And then our height of our press-on portion there, we're about 3/4 of an inch. We do sell this in three different length options to meet your needs. So we've got a 15 foot long model, a 25 foot long model and a 50 foot long model. You can find those using those part numbers that you see on the screen there. So depending on how much you're gonna need, get the one that's gonna work best for you.

For your frame of reference, the one that I have here is the 25 foot long option. So if that gives you a visual indication of how much you're gonna need for your setup, I hope that helps. But this is made here in the USA with that EPDM rubber so it won't shrink, crack or fade over time. It's also going to be resistant to UV damage so it is gonna hold up well for you. It does have this flexible core that's gonna help the seal maintain its grip in your rounded areas.

And that is completely encased in rubber, so it is gonna prevent any rest formation. Very easy to get this installed. You'll just press this onto 1/4 inch thick flange. You may need to use a rubber mallet to tap the seal in place, but then once you've got it where you need it, you can just use scissors to cut off any extra and you'll be ready to go. So that completes our look for today.

Again, I'm Michael with etrailer.com. Thanks for watching.