bing tracking image
  1. RV Covers
  2. Classic Accessories
  3. Storage Covers
  4. Class B RV Cover
  5. 18 Feet Long
  6. 19 Feet Long
  7. 20 Feet Long
Classic Accessories PolyPro III Deluxe RV Cover for Class B Camper Vans up to 20' Long - Gray

Classic Accessories PolyPro III Deluxe RV Cover for Class B Camper Vans up to 20' Long - Gray

Item # CA80103
Retail:$266.19
Our Price: $219.47
You Save: $46.72
RV Covers
Shipping Weight: 20 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Throw this storage cover over your Class B camper van to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind. Great Prices for the best rv covers from Classic Accessories. Classic Accessories PolyPro III Deluxe RV Cover for Class B Camper Vans up to 20' Long - Gray part number CA80103 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (345)
  • Q & A (0)
  • Photos

Classic Accessories RV Covers - CA80103

  • Storage Covers
  • Class B RV Cover
  • 18 Feet Long
  • 19 Feet Long
  • 20 Feet Long
  • Gray and White
  • Better UV/Dust/Weather Protection
  • Classic Accessories
  • Passenger Side Access
  • Rear Access

Throw this storage cover over your Class B camper van to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.


Features:

  • Cover shields your Class B camper van from rain and snow during short-term storage
    • Lessens the need for frequent washing, waxing, and roof treatments
    • Extends the life of your van and helps maintain resale value
  • Weather-resistant, 3-ply PolyPro top panel eliminates interior buildup of condensation
    • Blocks mild sunlight that can cause cracking and fading
    • Beads water on contact to prevent pooling and freezing
  • Single-ply PolyPro side panels prevent your van from getting dirty, stained, and scratched
    • Gray and white color scheme provides your van with a simple, clean look
  • Reinforced elastic hem stretches over the corners of your van for a snug look
  • Integrated straps and panels prevent it from flapping in the wind and damaging your van
    • Straps buckle to secure the cover onto your van
    • Adjustable tension panels on the front and rear of the cover remove any excess slack
  • Zippered panels on the rear and passenger's side give you easy access to the inside of your van
  • Built-in, breathable vents reduce the interior buildup of mold and mildew


Specs:

  • Application: Class B camper vans that are up to 20'
  • Overall dimensions: 20' long x 7' wide x 9' 9" tall
  • 3-Year warranty


You're worried about your Class B camper van getting wet and dirty in storage before your next camping trip. Whether you're storing your van in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your van will be protected. When you keep your van covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your van in for a newer model later down the road, this cover will help maintain that resale value.


Classic Accessories PolyPro Material

The 3-ply PolyPro top panel has moisture-wicking technology that vents condensation away to reduce moisture buildup that can damage your van over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your van. And when the rain stops, the fabric dries quickly in mild sunlight to minimize the development of mold and mildew.


How to Measure Your Class B Camper Van

To determine if this cover will work for you, measure the overall length of your van from the front bumper to the rear bumper. Make sure you're accounting for any spare tire carriers and ladders on the back, but not the hitch. Then measure the overall height from the ground to the top of the van. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.


Securing the Cover onto Your Camper Van

First unroll the cover and carefully spread it evenly around your van, making sure you don't pull too hard and tear the fabric. Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your van to remove any excess slack in the material. Adjust the tension panels on the front and rear of the cover until the cover fits snugly around the contours of your van. And then toss the weighted straps underneath your van to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job. The tension panels will help reduce the stress on the cover while you're tightening the straps.


Classic Accessories PolyPro Cover Zippered Access Door

And if you need to grab supplies, you can use the zippered panel on the passenger's side to easily access the interior of your van without having to completely remove the cover. You can also unzip the entire panel on the rear of the van so you can open the back doors and load and unload gear.



80-103-141001-00 Classic Accessories Poly Pro 3 Deluxe Class B RV Cover - Grey and White





Customer Satisfaction Score:


Customer Reviews

Classic Accessories PolyPro III Deluxe RV Cover for Class B Camper Vans up to 20' Long - Gray - CA80103

Average Customer Rating:  4.3 out of 5 stars   (345 Customer Reviews)

Throw this storage cover over your Class B camper van to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.

by:

I bought the cover to fit my 19 ft. long Sprinter with a high roof. The fit is better than I expected it would be and I like the side zippers for access into the van. At this point, the cover looks sturdy enough to stand up to Montana weather---that we shall see.



by:

We have a 2016 Hymer class B motor home that has to sit unprotected in the hot sun when we're not traveling in it. Not easy to find a quality cover that is not too painful to put on.

This cover is good quality, fits as well as you could hope for a bulky vehicle and my husband figured out a way to put it on with little or no help from me :)

We are very happy with the product, relieved our van is protected from 100-degree heat, and would recommend this cover whole heartedly. It was delivered quickly, too!



by:

Covering the vehicle the first time was a little cumbersome. However, now that we how to go through the steps it is quite easy. Did not know that the roof portion was white and took it for an inside liner when unfolding.l



by:

Shipping to the US was great, and this is the ONLY provider anywhere for older Roadtrek accessories. Haven't tried it yet, but it looks as described and was shipped with care and arrived in great condition.



by:

Product arrived within days, faster than anticipated. Box is in good shape so expect contents to be as well. We have not unwrapped it yet.



by:

Kept me informed on the status of my or der!



by:



by:

Great experience dealing with etrailer on getting a High quality cover that fits perfect over my tada travel trailer



by:

This cover seems well constructed and fairly easy to put on the trailer. However, it wasn't folded to apply the way the instructions stated. As well, the instructions say to get on top of the trailer, which we aren't able to do. My suggestion is to change the instructions. It took two of us -- we spread out the cover, then on each side walked the cover back and over. Doing it that way wasn't too hard. Suggest putting pool noodle sections on the trailer parts that are pointy and stick out. Glad we got it!



by:

Well crafted and sturdy. Fit Ram chassis Thor perfectly. The cover was thoughtfully constructed: during storage it’s easy to open for RV access (without having to undo the entire cover); came with throw bag” for use is getting tie straps under the coach; zippers and ties are all secured well. Wish only that there was a note about “front” so my first installation didn’t have to be turned around…



by:

So far so good . I was afraid that this would not fit my popup. I have a Rockwood Highwall the big one. and it fit just fine with little extra room. Just what I needed. Thank you very much.



by:

Rather than the convenient webbing and Fastex buckles that were provided on my last cover, Classic Accessories gave me three pieces of cheap, slippery rope for tie downs. It provided the opportunity to practice my knot tying skills while lying in the mud under my trailer. This will be my last Classic Accessories cover.



by:

Fits well on our Flagstaff Aframe popup including our front toy hauler rack. However the back corner developed small tears on the initial fitting. We have reinforced those corners. We like the heavier ceiling material & that it is white which will reflect heat/sun/ UV rays better. We also like the 4 vents hidden under a flap (2 on each side) - that should help reduce over heating and moisture build up plus reduce wind damage. Rather than use the rope they supplied as tie-downs, we have attached strapping & clips for the front, back & to the 3 side tie-down locations. The storage bag is nice to have, although it should be larger. We hope the cover will last 2-3 seasons



by:

Just finished putting the cover on our pop-up trailer and it fits perfectly. Looks great. We have put a lot of time into restoring our old camper-lots of memories in there-and wanted to be sure it stayed nice and dry thru the winter. We are very pleased with your product and how easy it was to install also. Would definitely recommend to anyone looking for a cover for their trailer. Hoping to see the inside of the camper is nice and dry in the spring.



by:

This fits a 1957 Shasta 1400 exactly. It has a 3 year warranty, which is exactly how long my last Classic cover lasted before the wind tore it. However, this was at high elevation (7000 ft) with strong sun and high winds (30-40 mph regularly) as well as cold winters (well below zero frequently). I expect it would last longer in more gentle conditions. I will continue to replace with the same cover every 3 years.



by:

I really liked this product. I was replacing an older cover that lasted about 4 years. This cover is a better quality and construction, and it looks like it will protect my travel trailer well. Also, I received the cover very quickly after ordering it. I recommend etrailer.com for their service and the quality of their products.



by:

Its excellent... So far... I just put it on. It went on extremely easily and I did it alone. Instructions say two people, but I found it simple to do myself. I'm also OK with walking on my camper roof. I feels well made. Time will tell if it survives a New England winter.



by:

While this is a custom cover meant for the small r-pod trailer, I purchased it for our ProLite Mini 13 based on recent reviews from others with the same trailer.



I was very pleased to see that the material and construction quality was similar if not identical to a number of excellent and durable covers I’ve used to store non-winter driven sports cars. However, the installation process was challenging for a number of reasons.



Firstly, after reading the Classic Accessories guide that instructed to unfold the cover from front to back on the roof of the trailer, I found that the manufacturer had folded and packed the cover incorrectly. Specifically, the cover was folded side to side instead of front to back, i.e.: the white roof section appeared at one end of the completely unfolded cover instead of appearing in the middle as expected. That meant we had to completely open up the cover on the roof of a car and manhandle it into place on the trailer after locating the yellow “front” label. The trailer is stored right next to our garage, so this task was not fun. We expected some fitment issues from a custom cover intended for something else, but not a packaging curve ball.



Secondly, (and I kick myself for not having noted this before we even started) the front and rear side profile contours of the r-pod are essentially the opposite of the ProLite Mini. So, not surprisingly, the “normal” fitment was unsatisfactory. After pulling and stretching to no avail, we still would have had poor rain runoff and unwanted Michigan snow buildup in loose folds at the at the front. So, we removed the cover and rotated it front to back for an almost perfect fit. It’s somewhat tight at the front and loose at the back, but much weather resistance than our first attempt. The only downside is that the zippered door section is now on the opposite side of the trailer, but it’s not a big issue for us.



As a sidebar, I’ve wondered why RV cover companies have neglected offering custom fitments for the Roulette ProLite line of Canadian trailers. Their market volume in the US and Canada is significant, and the weather conditions in Canada suggest a worthwhile sales rationale.



by:

Seems well made and as advertised. Went on easily with good elastic at the corners. Nice length on the sides. I ordered the 20 foot for a Trailmanor 2619 and have plenty of length at the front and rear.



by:

I have a 2017 Mini Winnie Drop 1790. Wanted a cover for the winter months to keep it looking great. Stumbled upon etrailers website but couldn't find a cover exactly for my trailer. Used the ask a question link and got a very prompt response. That was awesome. The email said this cover was for a R Pod but should work. It fits well except the left side where the plug in is located. I keep it plugged in at home to run the fridge. We had a pretty decent wind storm the other night and the cover didn't budge. Was about a 10 minute install with me and my wife with a couple step ladders. The zippered door opening match up nice for the door and rear hatch. Overall, great customer service and what looks to be a great product!



by:

I received the cover for my RPod in very good condition. The installation was easy by following the very clear directions provided with it. I am an engineer so I am overly critical of products that I use. This cover is very well done, it is form fit to fit my RPod perfectly which makes the covered trailer look nice this is important because we have to look at it all winter. I liked the extra touch of the weight bag to help get the straps to the other side. I attached the straps before starting to cover and this helped pull it over the top. Cover is well marked to get orientated properly before starting. I like the fit and should preserve the Pod well. I also used the storage bag for the cover to cover my gas tank. Thanks for the very nice product



by:

Carol,
I received the replacement
trailer cover in good condition just as promised. The first cover I purchased lasted me 3 years. The 2nd one which you replaced didn't last 6 months ? Anyway I will try the replacement this winter.
I put an inexpensive Walmart tarp under it see it will help the longevity of this new cover.
I appreciate your assistant in working with me on this problem and look forward to doing future business with etrailer.
Thank you



by:

Very pleased overall. Easy for two people to install, remove and store. We did add a few extra tie down ropes to secure the part protecting the front that overhangs the truck cab. Rig was stored outside and we were concerned wind could blow it off.



by:

We just pulled this cover off of our Heartland MPG 183, after the heaviest winter in recent Alaskan history. The trailer and the cover were both in excellent condition. I would highly recommend this cover.



by:

The cover appears to be very well made. It is a replacement for another brand ordered elsewhere that was not nearly as nice. It has vent flaps at the top sides to help with billowing on windy days. The side tie down triangles are a very nice feature also. It came with three cords to be used when tying down which I added a caribiner style clasp to each end for simpler attachment and assurance that it would not come undone.

Originally I made a mistake when ordering. The 1st cover arrived much too large. I quickly realised my mistake after seeing the cover spread across the trailer. etrailer quickly provided me with a return authorization and shipping label with clear instructions on returning. I then placed a new order with the correct size They even went as far as providing expedited shipping on the 2nd order. Very happy with their customer service!


25
345
Show More Reviews

See what our Experts say about this Classic Accessories RV Covers

Do you have a question about this RV Cover?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Erin H
Updated by:
Erin H
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.