Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs
Item # EM07705
Retail:$438.53
Our Price: $323.95
You Save: $114.58
Confirmed to Fit
2004 Dodge Dakota
5 Foot Bed
6-1/2 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (260)
- Q & A (0)
- Photos
2004 Dodge Dakota - Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs
- Truck Bed
- No-Drill Application
- Fixed Rack
- Over the Bed
- Erickson
- Fixed Height
- 800 lbs
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding load stops make securing loads fast and easy. Rustproof aluminum construction. Simple, clamp-on installation. Fits most pickup trucks.
Features:
- Heavy-duty truck bed rack lets you carry ladders, lumber, and more with ease
- Aerodynamic crossbars reduce drag and wind noise
- Sliding load stops help to keep cargo in place
- Just loosen hand knobs, slide load stops to desired position, and retighten knobs
- Easy installation with patented clamps - no drilling required
- Universal system fits most truck beds
- Rustproof aluminum construction
- Corrosion-resistant, yellow-chromate-plated hardware
- Compatible with most bed liners
Specs:
- Weight capacity: 800 lbs
- Crossbar dimensions: 66-5/8" long x 3-1/4" wide x 1-1/2" tall
- Upright support height: 29"
- Upright support base width: 12-5/8"
- Maximum distance between load stops: 35" - 36"
- 90-Day limited warranty
Note: Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.
Easy, Clamp-On Installation
Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases of the upright supports at the corners of the truck bed and clamp them to the lips of the truck's bed rails. Each base is secured to your truck bed rail with 2 clamps.
To install the crossbars, slide 2 bolts into the channel on the bottom of each bar. Insert the bolts into the mounting holes on the tops of the uprights. Center the bars over your truck bed, then secure them in place with hand knobs.
Sliding Load Stops
The load stops are easily adjustable along the crossbars. Just loosen the knobs under the crossbar, slide the load stops to the desired position, and tighten them.
Load stops are designed to prevent loads from sliding around, but they are also great to use as tie-down points for straps (sold separately) when you're carrying lumber, pipes, and other items without rungs that could potentially slide off the rack.
Rustproof Aluminum Construction
The ladder rack is constructed of lightweight aluminum so it won't take up much of your truck's carrying capacity and it won't rust. The installation hardware is also plated with yellow chromate to help prevent corrosion.
07705 Erickson Universal Contractor Pickup Truck Bed Rack w/ Load Stops - Aluminum - 800 lbs
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Alternate product found
- Arrived Damaged
- Manufacturer issue
Customer Reviews
Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs - EM07705
Average Customer Rating: 4.7 out of 5 stars (260 Customer Reviews)
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding load stops make securing loads fast and easy. Rustproof aluminum construction. Simple, clamp-on installation. Fits most pickup trucks.by: Christopher06/19/2023
One year review requested by etrailer.com. Box arrived extreamly tore up. Rack was obviously used but not damaged. I contacted etrailer who gave me a 30% discounted return. Racks held up well but I noticed a crack in the weld on one of the bars shown in the picture. I've put a 32' extention ladder on it a few times but ususally smaller a-frames and a 28' extention a couple of times. I'll get someone to fix the cracked arm. Overall I'm fine with the customer service and performance for the price. I recently removed the handy triangular hold downs for the past winter since I wasn't using the rack.
by: Tom09/04/2023
Thus ladder rack has been a very useful addon for my Nissan Frontier. I recently re-installed on a 2023 Nissan Frontier Pro and it went smoothly. My only criticism is that the hand knobs for the adjustable load stops are too small for the task.
by: W05/01/2024
We have been using this for a year now hauling our 32 foot fiberglass ladder. Easy to install and remove each time. Great quality.
by: Alvin Clayton05/06/2023
etrailer exceeded my expectations. Item as described. Very fast shipping. Thanks!!
by: Adam06/22/2020
2011 Ford Ranger
They look decent enough and do exactly what I need. Super easy install. I think I'll be able to remove the rear one(4 nuts with a zip gun) slide my KLR 650 in the bed put the rear one back on load the canoe and scoot down the highway in my 2011 Ranger. Super happy with these at this price point.
by: John12/28/2022
1998 Toyota Tacoma
This rack was installed on my 1998 Toyota Tacoma X-cab one year ago. It is a rock solid rack. I've carried some heavy and long timbers on this with no worry. I'm sure it will last as long as the truck!
by: Richard06/02/2020
The rack was a good price. It was delivered 4 or 5 days after it was ordered. All the parts were there and no damage. It was VERY easy to assemble and put on my truck. It seems to be very solid and pretty well made. Seems to be a great value. I purchased to transport kayaks and lumber that does not fit into the short bed.Time will tell , but so far so good.
Richard
6/11/2021
The racks are still great after one year. They were a good buy. Price was reasonable and they are sturdy and well made. They are simple to install and remove.
by: Patrick01/20/2020
I am giving the racks a five, although have to say I have not carried anything of substance on them yet. I got primarily to carry two kayaks at same time. But I am happy with how they installed, and how they look and the general apparent integrity of the product. I had a bit of a delay for delivery due to factory, which necessitated the customer service team of eTrailer to hold back the shipment until I was back at my residence. They did an excellent job with this special request, and communication was always prompt and to the point. These racks also sold for about half of the price of what I suspect is their major competition; so that was a major decision point for me. I do not at this time feel I sold myself short by not going with the more expensive brand.
by: Bill08/28/2022
Very rigid when installed on my 2020 Ram 1500. No whistling while driving. One missing knob which etrailer is replacing. Kayaks firmly strapped when you loop the straps under the cross bar between the two boats.
by: Dale09/08/2020
1993 Ford Ranger
I used the ladder rack as part of my roof top tent trailer build. The rack is awesome. I was able to install it so the top is further apart than the bottom so the tent would attach properly. Very well made. And as usual the customer service was excellent. Thanks Hally C.
by: Dennis M04/18/2017
2014 Ford F-150
Excellent product, I carry a 20' and 32' ladder on it every day. Super easy to load and unload ladders and other gear I have to carry daily! Very easy to mount and adjust! The end caps don't last long but I use the ends to attach ratchet straps.
by: EmJ09/16/2021
2012 Nissan Frontier
Bought this in conjunction with some kayak racks to carry 2 kayaks while pulling our TT in Nissan Frontier crew cab with short bed. Works great, does its job, not too hard to uninstall. Only warning to future users, if you have a utility track in the bed you may have to use a mallet to pound the J hooks to wiggle around the track when removing the rack.
by: Jeff Wenner06/27/2020
This is a great rack for kayaks.We could not haul our kayaks while we were pulling our camper.They would not fit in the truck box or in the camper.We ordered the rack and received it when they said it would be here.I installed it.The hardware was heavy,no cheap stuff. I bolted it on and it was rock solid.I put the kayaks on for our upcoming camping trip and they were also rock solid and out of the way.When kayaking is done I took it off and hung it in the shed.When I put it on this spring it bolted on beautifully and we are going again.A co-worker gave my wife your web address and i am very thankful they did.Great product!
by: Brian01/10/2023
This rack is awesome! At first I thought it might look too tall but using a small Colorado shop truck with pipe,Etc always hanging off the end it's tall enough that you don't have to think about hitting your head.Install was a piece of cake and it's adjustable.
by: Ray08/06/2017
2011 Nissan Frontier
The overall product quality was great.But the slider brackets had the wrong size hole and when I called they informed me that a few went out with that mistake.They didnt offer to send the brackets with the right holes or compensate me in anyway...not good business...my times worth something too...otherwise great deal thank you folks at etrailer.
by: Doug01/30/2021
Customer service, timeliness, and communication were all excellent! I will consider etrailer in the future!!
I gave 4 stars only because the product was scratched and should have been considered ‘used’, not new. I believe this was a factory issue, not etrailer! The product is usable even with the scratches and buff marks. And, it is exactly what I expected from the description. The one design item I did not care for is that the bolts stick up vs down; and, there was not an option for a cover to hide the sharp edge. Thanks!
by: John C07/03/2020
I believe this is just what the Dr. ordered. I’ll now have a way to get the kayaks, the camper, the grandson, and the wife all to the campsite and lake next week.
Installation was pretty easy even with load rails in the bed. Like I told the lady at another store when I was looking around for a solution “I need a rack, not a new truck. This was a very reasonably priced solution.
by: Gerald04/14/2020
The ladder rack install went easily into place. The J bolts for hold down interfered with the railing system a little and after I took a closer look, it seems like Nissan was in a hurry in fabrication. The rail system was installed at a slight angle away from horizontal. Other than that, good product and will easily hold my kayaks! Thanks!
by: Robert P.08/01/2017
2012 GMC Sierra
This is a great product. Simple to install and remove. Although it does not work with tonneau covers which I wish it does, I do like the design. The cost of this product is much cheaper that other manufacturers. It is built solid and its aluminum construction makes it light. I used this for hauling my 14' canoe for our camping trips.
by: Roland 06/19/2023
2016 Toyota Tundra
I have a Toyota Tundra, double cab, 6 ft bed. I needed to get some 16 ft long boards for my deck. The truck can't handle that so I found and bought the Erickson Truck Bed Ladder Rack. It was easy to put on and I was able to handle the the 16 ft deck boards. I have another deck to build and the ladder rack will make it easy to get the deck boards needed.
by: William03/17/2021
Installation and removal are extremely easy. The Ladder Rack is well made and much stronger than expected. I can carry my 15' canoe, or several pieces of lumber that are too long for my truck bed with ease.
by: Jeremy 11/09/2023
2023 GMC Sierra 2500
We love this ladder rack. Very easy to install and remove within a few minutes.
by: Joe10/02/2020
2006 Ford Ranger
Installation was very easy, took about an hour and a half. I was able to install it on top of my over the rail bedliner by drilling 1.5" holes for the clamps. Seems well built and very solid. Happy so far
by: Timothy02/02/2020
2012 Nissan Titan
I like the mounting system. I guess I didn't read enuff reviews. I thought that a Nissan titan with a utility bed worked with bolt on system but. You have to remove the rails to clamp down ladder rack.
by: Chadd03/11/2021
Great product for the price. Easy install and I've definitely USED it. All day every day there has been something on that rack and I have never once had to worry about it. Worst thing that happened was I lost two of the end caps on the upper horizontals. Glue them in to begin with if it's a concern.
25
260
Show More Reviews
See what our Experts say about this Erickson Ladder Racks
- How to Carry 2 Canoes Side by Side on a 2014 Nissan Frontier SL with Factory Roof RackOne option for your 2014 Nissan Frontier is to use a truck bed rack such as # INRT101-65. This system includes bars that are 65 inches long. The canoes would sit on the bars right above the bed and would overhang the rear of the truck with this set up. Another option is a ladder rack such as # EM07705 with 66-3/8 inch long bars. The bars on these two systems are going to be longer since it sounds like the bars on your Frontier span the distance between the side rails so there is a lot...
view full answer... - Ladder Rack Recommendation for 2017 Ford F-250 with Side Mount Tool BoxesThe only type of ladder rack we can recommend for your 2017 Ford F-250 that has the two side tool boxes is the DeeZee part # DZ95053 which can attach to the other side of your truck bed. There isn't a way to fit the Erickson Ladder Rack part # EM07705 with your current toolboxes.
view full answer...
- Is the Erickson Truck Bed Ladder Rack Compatible with Crossover Toolbox on a 2019 Chevy ColoradoYou could potentially mount the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 with the Lowe's toolbox that you referenced but unless you moved the forward-most uprights behind the toolbox it would be sitting just on the U-Bolts so you'd have to drill holes in it. I recommend using the Thule TracRac TracONE which comes in Silver # TH27000XT and Matte Black # TH27000XTB with the Toolbox Mount Kit # TH41000 to mount this toolbox on your Colorado instead as this is designed for a...
view full answer... - Recommendation to Carry Canoe on 2017 Ram 1500 When Towing TrailerI have a great solution for transporting your 15 foot canoe on your 2017 Ram 1500 when towing a trailer. I recommend looking at the Erickson Truck Bed Ladder Rack # EM07705. This rustproof aluminum ladder rack will simply clamp onto the bedside rails on your truck to provide crossbars for securing your canoe. It has a weight capacity of 800 pounds and sliding load stops to help keep your cargo in place. I have attached a demonstration video on this product for you to check out. Note that...
view full answer... - Budget-Friendly Ladder Rack That Can Handle Large Capacity for 2019 Ford F-150 I'm glad you asked because we absolutely have really good options for ladder racks that are both economical, can carry a lot of weight and fit your 2019 Ford F-150 - no matter what bed size it is. There are two options that stand above the rest, and both will be perfect for your needs, you can just get the one with the color you are looking for - either black or silver. - Buyers Products Truck Bed Ladder Rack with Load Stops # 3371501680 - Erickson Truck Bed Ladder Rack with Load Stops...
view full answer...
- Ladder Rack Recommendation for 1992 Ford F-250We have a similar ladder rack that does fit your 1992 Ford F-250 with the Erickson ladder rack part # EM07705 which would work great but the Rola you mentioned is not a fit so it would not be the correct rack to use.
view full answer... - Thule TracRac Base Rail Installation Instructions For A 2022 Toyota Tundra With 6-1/2 BedYour 2022 Toyota Tundra most likely does have stake pockets with the bedrail cap covering them. There should be some indentations where these holes would be located and you can cut them out yourself using a cutoff-wheel. If you really do not have stake pockets then you would need to switch to a different rack like the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 if you do have a deck rail system in the bed of your truck or the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705...
view full answer... - Can The Erickson Load Stop Be Used On The Stark Aluminum Ladder Rack?The Replacement Load Stop Assembly # EM57705 is specifically designed for the Erickson Ladder Rack # EM07705 so I can't say for sure if it is compatible with your Stark aluminum ladder rack. I did some research and the Stark rack does look nearly identical to the Erickson rack, but I still cannot verify fitment with the load stop. The Erickson rack crossbars are 3-1/4" wide and 1-1/2" tall so if your crossbars are that size then it may work.
view full answer... - Does Erickson Ladder Rack EM07705 Fit 2011 Ford F-250 Short BedYes, the Erickson Ladder Rack part # EM07705 is a confirmed fit for your 2011 Ford F-250 short bed. If the tool box goes over the bed rails this rack would need to install behind the tool box.
view full answer... - What Kayak Carrier Do You Recommend for the Erickson Truck Bed Ladder Rack # EM07705?We do carry compatible ladder rack/tonneau cover combinations for your 2006 Toyota Tundra (6-ft. double cab). For a tonneau cover that will leave your stake pockets open for a ladder rack, I recommend the BAKFlip G2 Hard Tonneau Cover # BAK26405. The G2 features a quad-fold design that allows for partial or full truck bed access in seconds without having to remove the cover. Another great feature about the G2 is that if the tailgate is closed, the cover cannot be opened. This creates theft...
view full answer... - Replacement Load Stop For Erickson Truck Bed Ladder Rack The Replacement Load Stop Assembly for Erickson Aluminum Truck Bed Ladder Rack, part # EM57705. is what you need for the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum, part # EM07705. I have included a product description link below.
view full answer... - Ladder Rack Recommendation for 2013 Nissan Frontier with Utili Track and Tool BoxThe Yakima Overhaul HD Ladder Rack part # Y01151-5868 is designed to attach to the utili track you have in the bed of your 2013 Nissan Frontier and will allow you to keep using the utili track tool box you have. I'd put the ladder rack bar in front of the box though so that the uprights are spaced out more.
view full answer...
- Does the Adarac Aluminum Series Custom Bed Ladder Rack Require Drilling if Bypassing Stake Pockets?I have an alternate solution for you. Since the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs - Matte Black # A39ZR is designed to fit onto the bed stake pockets, the Adarac will require some kind of drilling for the mounting points. However, if you are looking for an alternative rack that doesn't attach to the stake pockets, I recommend the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs # EM07705. The Erickson fits onto the truck's bed with...
view full answer... - Does Erickson Ladder Rack EM07705 Fit a 2002 Ford F-350The Erickson ladder rack part # EM07705 that you referenced is a confirmed fit for your 2002 Ford F-350 and would work well without any extra modifications or install steps. I attached an install video that shows the rack being installed a similar truck as yours.
view full answer... - Ladder Rack Recommendation for 2005 Nissan Titan with Utili TrackThe Erickson Ladder Rack part # EM07705 that you referenced is a confirmed fit for your 2005 Nissan Titan with a Utili track so it would be a great option. It also fits for both bed lengths too of 5-1/2 foot bed and 6-1/2 foot bed. It comes with aero shaped bars to help with wind resistance and load stops as well. Check out the review vide I attached for more info as well.
view full answer... - Ladder Rack System Compatible with Nissan Utilitrack System on 2018 Nissan FrontierI have a solution for you, but the Thule TracRac TracOne # TH27000XTB is not compatible with the Nissan Utili-track system. For a Thule Ladder Rack system that is compatible with your 2018 Nissan Frontier's Utili-track system you would want to instead use the Thule TracRac SR # TH43001XT-600 (for 6ft bed) or # TH43001XT-603 (5ft bed) which offers a more functional sliding ladder rack for your 2018 Nissan Frontier. If you're looking for something a little bit more budget friendly, the Erickson...
view full answer... - Are Crossbars of Erickson Aluminum Truck Bed Ladder Rack # EM07705 RemovableErickson Aluminum Truck Bed Ladder Rack # EM07705 does allow for easy removal of the two crossbars from the upright posts. The bars are held in place by hand knobs that you can see in the linked video at the 2:50 minute mark. The rack also includes adjustable load stops.
view full answer... - How Long are the Rails on the Adarac Custom Truck Bed Ladder Rack 70450The side rails that are included with the Adarac Custom Truck Bed Ladder Rack part # A70450 are 70" long according to the manufacturer. The width is adjustable but I still would not be able to confirm fitment on your Ford Ranger. If you can however provide me with the year of your Ford Ranger and whether or not you have the stepside bed I would then be able to confirm a ladder rack that will fit. For example, if you have a 1983 - 2012 Ford Ranger with the 6' stepside bed then you can...
view full answer... - How to Determine if Erickson Ladder Rack Will Fit in Garage When InstalledFor your 2001 Dodge Ram 2500 6-1/2 foot bed the Erickson ladder rack part # EM07705 is a confirmed fit. The ladder rack will add 29 inches to the top of your bed rails. You would need to measure from the top of your bed rails up 29 inches to determine if the ladder rack would fit in your garage door. The load stops add another 6 inches to the tops of the bars to put the overall height at 35 inches.
view full answer...
- Ladder Racks Compatible with 2014 Nissan Frontier Factory Utili-TracksThe Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is not a fit for your 2014 Nissan Frontier. The only full ladder rack that is compatible with your factory Utili-Track System is the Pilot Bully Adjustable Ladder Rack for Full-Size and Compact Trucks - 500 lbs # CG-902 if you have the Crew Cab 6 foot bed. If you have the King Cab with 6 foot bed, then Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 or the TracRac SR Sliding Truck Bed Ladder Rack # TH43001XT-600 are also...
view full answer... - Ladder Rack Recommendation For 2021 Nissan FrontierI do have an option for you, if NOT getting a black ladder rack is a deal breaker . The Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks - 500 lbs - 68" Bars, part # Y01151-5868, is a black ladder rack that has a weight limit of 500 lbs and is also height adjustable. The Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs, part # EM07705, is still a viable option. It has a higher weight limit, 800 lbs, because of its fixed height. It is also a more...
view full answer... - Does the Erickson Truck Bed Ladder Rack # EM07705 Come with 2 UprightsThe price for the Erickson Truck Bed Ladder Rack # EM07705 includes both of the ladder rack uprights that you see in the main product picture. I attached a review video for this rack for you to check out as well.
view full answer... - Is The Erickson Truck Bed Ladder Rack Compatible With A 2019 Toyota Tacoma With Deck Rail SystemThe Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 is unfortunately not compatible with 2019 Toyota Tacoma with deck rail system, but we do have a comparable fit with the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This rack is designed to work with your factory utility track system, the truck bed ladder rack clamps onto your side rails for easy, no-drill installation. The aerodynamic, aluminum load bars adjust to easily fit your Tacoma and the T-slots in the bars will...
view full answer... - Will The Rola T3 Ladder Rack Fit A 2022 Nissan Frontier 5' Bed With Utili-Track System The Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 unfortunately isn't designed to fit a 2022 Nissan Frontier 5' bed with Utili-Track system so the closest option to this that is compatible would be the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705. This ladder rack will mount using clamps for a fast and easy installation that requires no drilling into the bedrails. It will also come with come with sliding load stops that can easily be loosened by turning the hand knobs...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Video by:
Joe V
Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
Ethan H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Colin H
Test Fit:
Hayden R
Test Fit:
Jared G
Test Fit:
Ed W
Test Fit:
Jon G
Test Fit:
Aidan B
Test Fit:
Evangeline M
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Adam
6/23/2021
Love it. Ive kept a canoe and sometimes add a kayak. I even had a couch in the bed and one on the rack. So my only concern is rack thieves. These just bolt down and can be removed under 3 three minutes with a impact gun. If I head to the city they come off. The quick break down is nice if I need to take the truck to the car wash.