MagnaFlow 3" Exhaust Tip - Stainless, Weld-On for 3" Tailpipe

See what our Experts say about this MagnaFlow Exhaust Tips

• Weld-On Exhaust Redirect Exhaust Tip For a 2008 Ford Explorer or Taurus
  The Weld-On Exhaust Redirect, # MF35180, is designed to fit on a tailpipe that has a 3 inch outside diameter. You will need to measure the exhaust on your 2008 Ford Explorer and/or Taurus to determine what size the tailpipe is and if there is a long enough section exposed to install the tip. I have included a link to all of the exhaust tips we carry.
  view full answer...
• How to Protect a Cargo Carrier From Exhaust Heat
  I have a solution for you but I don't have any options for heat shields to protect your cargo when mounted on the Flint Hill Goods Cargo Carrier item # FHG27ZR. This will be an issue with any cargo carrier or accessory you mount on your Forester so the best option will be to point your exhaust down and away from the rear of your Subaru. To do this you will want to change out your exhaust tip. You will need to measure the diameter of your exhaust pipe to determine which one you will need....
  view full answer...
• Exhaust Tips For 2013 Ram 1500 With 5.7 Hemi Engine
  It sounds like you are looking for exhaust tips to install on your 2013 Ram 1500. I have attached a link to the exhaust tips we offer you can check out. You will need to know what diameter your exhaust pipe is so you can select the exhaust tip that will work. Some of the exhaust tips we offer like part # MF35180, are designed for 3-inch tailpipes and are a weld-on application. Other exhaust tips like part # MF35208 are a clamp-on and are designed for 2-1/4 and 2-1/2 inch tailpipes.
  view full answer...
• Recommended Turndown Exhaust Tips For 2015 Honda Odyssey
  We do offer exhaust tips that are designed to be installed with the angle pointed downward. If you have a 3 inch tailpipe you would need part # MF35180. For 2-3/4 inch you would need part # MF35179, for 4 inch tailpipes you can use part # MF35181, and for 3-1/2 inch you would need part # MF35178. These are all weld-on exhaust tips and should be installed by a certified professional welder. And thank you for being a repeat customer at etrailer.com
  view full answer...
• Will Exhaust Set Birch Wood Plywood On Fire
  If the plywood does not make contact with the exhaust pipe, it might become discolored, perhaps even sooty. It should not catch on fire while on top of the Curt Cargo Carrier, part # C18110. We usually recommend an exhaust tip if you want to make sure there are no unintended consequences while carrying the plywood. You could add something like the MagnaFlow 3" Exhaust Tip - Stainless, Weld-On for 3" Tailpipe, part # MF35180. These get welded on your exhaust pipe to direct the exhaust downward. I...
  view full answer...
• How To Move Carpod Cargo Carrier Away From Exhaust Heat on SUV
  The exhaust melting cargo on a cargo carrier like the Carpod part # M2200 is not as common as you may think unless the cargo carrier is the exact same height at the exhaust or relatively close to it. We typically recommend at least 12 inches between the exhaust tip and the carrier to prevent melting. If you are experiencing excessive heat from the exhaust the best way to fix this is point the exhaust down with an exhaust tip. I recommend to use an exhaust tip that points away from the...
  view full answer...

Do you have a question about this Exhaust Tip?