4-1/4" Round. Strobe light with rear turn signal function has 9 diodes and produces a 3-flash strobe pattern to alert others to the presence of your vehicle. LumenX optics creates a solid panel of light. Recessed mount.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. We're going to be taking a quick look at the Luminex LED turn signal and strobe lights. These are going to be two amber lights. They come individually. It doesn't come as a pair, but I just wanted to show you what they look like whenever you do have them paired up to the same type.
There's either type one or type two. The reason why there'd be a different or that you'd need to pay attention is if you want to have the lights flash in sync with each other. So there'll be synced up. You want to get two of the same kind. Either type one or type two, it doesn't really matter.
They're pretty much the same. Or, if you want them to alternate and go back and forth, you'll want to get one of each, so a type one and a type two.These are both going to be the same type so they should flash in sync. I'll show you that here. Turn them on. They flash in sync.
And then whenever you hit the override for just the solid signal, they'll go to that solid signal and then they'll go back to the flashing sync depending on how you have these wired up. It just kind of depends on the function there. If I switch it around, should just come on solid unless you hit something to operate . there we go .. the strobe function.
Typically it looks like the solid function is going to override the strobe so that's just something to keep in mind there. Kind of depends on how you wire it up, but gives you both those function. And again, with that sync wire, they will flash in sync with each other. So take a closer look at these guys and make sure that they're the right fit for your trailer.They're going to be 4-1/4 inch in diameter. Again, this does not come as a pair. I just wanted to show you both at the same time to show you that sync pattern. Each light is 4-1/4 inch in diameter. It also does not come with the wiring. You will have to pick that up separately. There should be two pieces that you'll really need. The three-wire plug. That's available here at etrailer.com. You can find that as a related product on the product page using part number 417-49 and then there's also this single wire which you can also find available here at etrailer.com. This is your sync wire. If you don't really care about having a light flash in sync, you don't really have to get this but this is going to give you your basic functions of the light. They make a nice, easy watertight connection in the back of that housing so you don't have to worry about there being any water getting in there.Now measurements as promised, 4-1/4 inch in diameter, 1-3/8 of an inch thick. If we go to the back of the housing here, the light face itself again is that 4-1/4 inch. There are nine diodes total. The power draw at 12 volts is 0.23 amps. It does have a limited lifetime warranty. It's made in the USA. There is a grommet that you can find to go with this as well. And again, you can find that here at the product page as a related product. Kind of finishes off the light, gives it a little bit of a road dampening effect. It kind of keeps it insulated from any kind of road bumps so it should last longer.All in all, this should be a really nice light for your trailer. If you want to find that type one light, if you want to have an alternating pattern, you can also find that here at etrailer.com as a related product. So check it out if you're interested. Hope this has answered your questions on this light and whether or not it's going to be the right one for you. Again, I'm Ellen here at etrailer.com. Thanks for watching.
Average Customer Rating: 4.6 out of 5 stars (108 Customer Reviews)
4-1/4" Round. Strobe light with rear turn signal function has 9 diodes and produces a 3-flash strobe pattern to alert others to the presence of your vehicle. LumenX optics creates a solid panel of light. Recessed mount.Product a s described. Exactly what we needed.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
The light is very bright and is good quality I love it
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
perfect timing on the ETA of parts Thanks alot
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
Exactly what we were looking for. I do think the description needs to be more clear as I ordered an extra wire that actual came with the light. Other than that received the product earlier than expected and we were able to finish the job for the customer sooner.
Easy installation. Working perfectly after 1year
I was worried that the backup lights would not be bright enough, but they’re surprisingly bright for only one segment of the light.
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
I used these to replace the tail lights on my utility trailer. They are bright and because they are LED they will not require any attention. I look forward to many years of reliable service.
Thank you for the prompt service.
These worked great
Perfect replacement for my damaged tail light on our new Timpte 720 aluminum car hauler. Shipping was very quick and packaging was perfect. Thank you for the great service.
Great light but would need to manually turn them on each time you kill the main switch in the horse trailer. Will reorder the same light but without the touch switch in the middle of the lens. Bad on me for being a poor electrician.
Sure would’ve been nice to know the mounting flange and enclosure is plastic.... not one place in the description or video.... disappointed
Very nice lights bright
Tail lights were as advertised and shipping was timely.
Product was shipped quickly, and it was exactly what I needed.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.