Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable storage cover protects your etrailer 2,000-watt inverter generator from the elements. Drawstring keeps your cover secure in windy conditions. Built-in zipper and flap expose handle allowing you to carry the generator while covered.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna be taking a look at the etrailer storage covers for the etrailer generators. These storage covers are gonna protect our generators when not in use. They're gonna shield them from the elements and keep dirt and debris from collecting. There's one for your 4500 watt generator, your 3200 watt, and your 2000 watt.Other covers, such as tarps or canvas, can trap moisture and then lead to rust or corrosion. Here on the outside, the etrailer covers are made out of a tough polyethylene material, so they're gonna repel water. Here on the inside, it features a soft fabric, which is gonna help absorb that moisture as well as prevent our generator from getting scratched.They're form fitting, so they'll easily fit in place over our generator, and the drawstring at the bottom will give it a snug fit and prevent it from coming loose in windy conditions.
Each cover features a plastic beading to further help keep its shape.While the 4500 on the 3200 watt covers share the same shape, the 2000 watt is different. It has more of an arch design, which again, easily fits over our generator. It also features a hook and loop opening at the top so we can access the zipper and we can carry it with the cover still in place.If you're using your generator at the campsite, you want to be sure and let it cool down before you cover it. While the storage covers do fit the etrailer generators, they may fit your brand of generator as well, so we'll give you some dimensions.The 4500 watt cover is 25-3/8 of an inch long, 19-1/2 inches tall, and 18-1/4 inches wide. The 3200 watt cover is 22-3/4 of an inch long, by 17-7/8 of an inch tall, and 17-1/4 inches wide.
And finally the 2000 watt cover is 18-7/8 of an inch long, 15-3/8 of an inch tall, and 11-3/4 of an inch wide.And that's gonna complete our look at the etrailer storage covers for the etrailer generators.
Average Customer Rating: 4.8 out of 5 stars (57 Customer Reviews)
Durable storage cover protects your etrailer 2,000-watt inverter generator from the elements. Drawstring keeps your cover secure in windy conditions. Built-in zipper and flap expose handle allowing you to carry the generator while covered.fits perfect, even has velcro open at the top for handle or pull through. I like it
I looked at a lot on covers for a Honda 2000 and this looked like the best. I received it today per schedule and it is really a good quality cover. The cover fits great.
I have two Briggs and Stratton P2200 PowerSmart Inverter Generators that I store on the back porch during hurricane season. Because they are open to the elements I covered them with trash bags - not a pretty sight. I found a cover that I thought would fit although it was not specific in its description, however, I decided to give it a try. The cover was reasonably priced (under $20.00) with very reasonable shipping cost. The cover arrived in a few days and it fits the generator perfectly. I just ordered a second cover for my other generator. It's well constructed of fairly heavy gauge plastic with at drawstring on the bottom to make sure it stays in place. ETrailer is great to deal with - reasonable prices and shipping and an easy site to order from.
I recommend this product thumbs up.
Great seller and great product it fit my inverter like custom built, i recomended to my sister and shes going to order one too
Reinaldo O.
10/8/2021
It still working great ant waterproof the material hasta color fade neither its getting brittle
1st off, etrailer is a great customer service company and I would always prefer to purchase from them. I know this from past purchases. Genny cover is just as described just wrinkled from being package in small box. Hoping it will have better appearance after a few days stretched out. Would by again.
Fits great - we have a Champion 2000 watt generator. Came in record breaking time. Looks great on our sailboat.
Using this for Ryobi 2300wt. Snug fit will keep the weather off and unit clean and ready for use.
Danny
8/8/2022
Cover holding up well. Use it traveling long distance in back of my truck. Velcro on top allows cable lock to pass through handle. Stays outside about 3 months a year. When stored in shed cover keeps generator clean and prevents insects from building nest. Mud daubers are bad for RV stuff down south.
Have yet to install item but looks great. We have a lot of rain in store the next week or so so may get installed between the rain drops, if not will get it done. Am hoping it fulfills my needs.
It is exactly what I needed. Just bought my generator and wanted to protect it. Thanks
After a year of using this cover it's held up pretty good. It does seem to stay a bit damp after heavy overnight condinsation but easily remedied by hanging it out to dry.
I'd buy again.
Fit nicely but after less than one year exposed to the elements it’s falling apart. I’m not sure anything available would be better, but this is junk!
fit perfect in good shape will keep out of elements
Fits great
Like it.
Looks good. Fits good.
We currently own the 4,500-Watt Portable RV Generator - 3,600 Running Watts - Propane or Gas - Electric Start (Item # 333-0005) for our travel trailer. With Hurricane Laura passing through Louisiana it really put this generator to this test. It passed with flying colors both running my travel trailer and one appliance in the house, To take a lot of the load off of this one, I ordered this model, 4,500-Watt Portable Generator - 3,600 Running Watts - Gas - Remote Start Item #333-0004. We received the item yesterday afternoon via UPS. Assembly was great and instructions were easy to understand. Fueled and oiled it up, and tried all three options (remote, push start, pull cord) to start it with little or no hesitation. The easy choke is a nice feature, by pushing it to start and it automatically adjust. There is another nice feature having an onboard bottle opener on the back. I would recommend Item # 333-0008, Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant.
The product and customer service from etrailer was fantastic. They answered questions to get the best possible fit on our generator. Unfortunately, the manufacturer does not make a cover to fit and this one is still a bit too large, but we can make it work. Thanks for all your help!
As always, you delivered a very nice product timely with no problems. As an RV owner etrailer has the right products when I need it. Thanks for your great service.
Best customer service I have experienced! Generator arrived in less than a week.
Package from shipping was a little beat up, but generator was package great. I removed from the box, removed engine brackets, installed wheel and look forward to running it for break in, this weekend. Thanks a lot!!!!!!!!!
Great Cover and a great Generator, Really like the feature that allows it to run on propane.
Perfect size for a big 100lb generator. Holds it very stable with no bouncing.
The cover is heavy duty and appears that it will outlast the one that I bought from Champion. The only issue is the drawstring does not prevent the cover from being able to blow off. I will solve by putting a ratchet strap around the unit to hold the cover on
Do you have a question about this Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Raymond M.
11/15/2020
It still fits great and has not shown any wearing at all.