TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front
(94 reviews)
Price: $685.40
In Stock
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front
Our Price: $685.40
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (94)
- Q & A (0)
- Videos (1)
- Photos
TorkLift Camper Tie-Downs
- Front Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Aluminum and Stainless Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with rear tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Stands up to harsh climates and terrain with rustproof aluminum arms and stainless steel receiver brackets
- High-impact powder coat finish adds an extra layer of protection
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
Heavy-Duty Tie-Downs
Heavy-duty strength in a lightweight package: the TorkLift Talon tie-downs are the premium choice for heavy truck campers and unforgiving climates. Made of military-grade aluminum alloy, the removable arms are rustproof and robust while also being lightweight and easy to handle. The receiver brackets are constructed of rugged stainless steel, and both components are protected by a high-impact powder coat finish that guards against wear and tear.
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity is going to sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush to the underside of the vehicle. Remove the arms from the brackets when you're not using them and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F2016A Tork Lift Talon Truck Camper Tie Down - Front Frame Mount - Aluminum - Custom Fit
Item # TLF2016A
This Product Fits The Following Vehicles
- 2011 - 2016 Ford F-250 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2011 - 2016 Ford F-250 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2011 - 2016 Ford F-250 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Original 20K
- 2011 - 2016 Ford F-350 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2011 - 2016 Ford F-350 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2011 - 2016 Ford F-350 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Original 20K
- 2011 - 2016 Ford F-450 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2011 - 2016 Ford F-450 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2011 - 2016 Ford F-450 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Original 20K
Video of TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of TorkLift Camper Tie-Downs - Aluminum Custom Frame Mounted Front Tie Downs - TLF2016A
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at these TorkLift Aluminum Custom Frame-Mounted Front Camper Tie-Downs. Now, these are custom tie-downs that are designed to fit the 2011 to 2016 Ford F-250, F-350, and F-450 Super Duty with an eight foot bed and without the board or step underneath the truck bed and with a factory installed hitch or with a TorkLift SuperHitch Magnum or with a TorkLift SuperHitch Original. These custom tie-downs are going to provide attachment points at the front of your truck bed for securing a bed-mounted camper. The rear tie-downs are sold separately, but you can find the rear tie-downs that you need by using the fit guide here at etrailer.com. Insert the year, make, and model of your truck, and our fit guide will let you know the rear tie-downs that you are going to need that will pair with these front tie-downs. Now, these are made here in the USA, and these brackets are going to fit tight to your truck's frame with no loss of ground clearance, and the frame-mounted design is going to ensure excellent handling, because securing your camper to your truck's base instead of its bed better distributes the weight to keep your setup from being too heavy.
Now, these are going to be virtually undetectable when they're not in use, and I wanna give you an overhead view. so you can hopefully see a little bit better. To remove the inserts, you're just going to slide out the included safety pin there, and these are going to slide right out. And of course, these inserts are constructed of lightweight aluminum alloy, and they can be easily removed, easily replaced, and when you remove these, they're, like I said, real lightweight, you can throw them in the rear of the cab of your truck, and they're not gonna be any hassle to maneuver or handle or transport or anything like that. I do wanna go back to my closeup view real quick.
These tie-downs do come with what TorkLift calls a finishing kit. It's basically a foam block that you can put all the way in the back of the bracket to eliminate any rattling or anything like that, and then it comes with a vinyl cap that you can put over the bracket here to give it a nice finished look when you don't have that insert in there. So that's a nice addition, a nice touch that they added to this. And then, you just slide the aluminum alloy insert back in. If I didn't mention this, you do have two different holes here to give you the flexibility to adjust this for the best length that you are going to need.
And the brackets of course are constructed of stainless steel, and both the aluminum alloy inserts and the stainless steel brackets have a high impact powder coat finish that's going to add an extra layer of protection, again, to the brackets and to the inserts. So you're gonna receive everything that you see here on the table before me. Let me give you another overhead look here, you see all the hardware that's going to come with this to allow for a successful install. Again, you're gonna get the aluminum alloy inserts and the stainless steel brackets and a set of instructions to walk you through step by step on how to install these. TorkLift does provide a lifetime warranty on these, and that's going to conclude our look today.
I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- etrailer mistake
Customer Reviews
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front - TLF2016A
Average Customer Rating: 4.6 out of 5 stars (94 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.by: Rick W.12/01/2016
Excellent Product, installed easily and does the job of holding down my large truck camper very well, very satisfied. Rick
by: Rick06/29/2020
Easiest installation available. These fit perfect and attach just as instructed. The only issue you may have to watch is that on some truck frames, mine being one of them, Ford covers one of the holes with a black sticker that states, "No Mounting Bracket". In my case, the writing on this sticker was covered by a film of road grime and I had problems even finding the hole to dry fit the bracket until I cleaned off the frame with solvent. The actually TorkLift kit fits the frame perfectly though. The passenger rear bracket is very close to the exhaust pipe so when diesel particulate filter regeneration cycle begins, it will melt the label off the bracket but does not appear the even burn the paint on it so should still be OK, just be aware when unhooking the tie down from the bracket as it could be very hot.
by: Rick06/29/2020
Easiest installation available. These fit perfect and attach just as instructed. The only issue you may have to watch is that on some truck frames, mine being one of them, Ford covers one of the holes with a black sticker that states, "No Mounting Bracket". In my case, the writing on this sticker on the passenger side frame was covered by a film of road grime and I had problems even finding the hole to dry fit the bracket until I cleaned off the frame with solvent. The actually TorkLift kit fits the frame perfectly though.
by: Rick06/29/2020
Easiest installation available. These fit perfect and attach just as instructed. The only issue you may have to watch is that on some truck frames, mine being one of them, Ford covers one of the holes with a black sticker that states, "No Mounting Bracket". In my case, the writing on this sticker on the passenger side frame was covered by a film of road grime and I had problems even finding the hole to dry fit the bracket until I cleaned off the frame with solvent. The actually TorkLift kit fits the frame perfectly though.
by: Tom Robert02/24/2015
2015 Ford F-350 Super Duty
Product was great and easy to install. Shipping was fast and free. Price was very good.
Only issue is the rear extensions are a different color than the fronts.
by: Jason 07/09/2022
by: Larry 02/11/2021
by: Jeff08/14/2023
Ordered both front and back set for my 2023 F250. All good except one of the bolt holes for the front drive side is missing. Called etrailer. Option 1 - return (we'll see). Option 2 call torklift. Called torklift and left a message - we'll see what the response is. Viewing etrailer website, this is the proper fit. Viewing torklift website "There are no fits available". Photo included.
by: Daniel03/28/2024
Torklift makes the best truck camper accessories period! Best value for the best price.
by: David 05/08/2024
Fairly easy installation, lots of support and videos if you need the help. We'll built and works as it should.
by: JHB01/20/2022
Always a great product! Shipping packaging needs to be improved as these were received dinged up and scratched. Installed anyways as I didn't want to go through the hassle of reorder and return.
Will still continue to purchase products through etrailer, but wanted to make note.
by: Ken F. 06/14/2016
Excellent product and excellent service from ETRAILER! Held up well after one year, will hold up in long run as well. Fit and finish of product is outstanding. Durable coatings, and well worth the extra money for these!
by: Ryan 09/02/2023
Great product. E trailer staff was friendly, knowledgeable and made the purchase easy. Will use them again for future needs.
by: Paul03/12/2024
Installed easily and works great!
by: Ryan02/02/2023
Installed on a 2016 RAM 3500. The install was pretty easy overall however, my biggest gripe is that I needed to purchase 6 extra Grade 8 bolts and nowhere does the packaging indicate that I needed to purchase extra hardware. Also, the drivers side mount was not manufactured 100%-flat so getting the short bolt in was a challenge but finally got it. I'm giving this a 3-star due to the missing bolts and no indication that more would be needed.
by: Robert07/10/2023
The tie-downs were a bit difficult to install for a novice but if you follow instructions closely they did install as outlined in the instructions. They are lightweight and have held my camper in place very well. I am happy with this purchase.
by: Thomas 07/12/2023
I purchased front & rear TorkLift Frame mounts. Thay worked great and safer than bed mounts.
by: Gilbert H02/22/2017
I bought the Torklift camper tie downs for my new 2017 Ram 3500 dually. I haul a Lance 850 slide in truck camper. They came today and I installed them in about 4 hours. (I work slow) I bought the Aluminum ones so I don't have to worry about any rust. They look great and like the Torklift that was on my old truck I am sure they will give me great service.
by: Cynthia11/04/2021
Torklift frame mounted tie downs are a great product. The rear ones are easy to install. The front require a bit more skill and an extra set of hands. It’s a bit nerve wracking thinking you might loose the bolts into the frame! I upgraded my truck from an F150 to an F250. Because the brackets aren’t transferable, I had to get a new set and install them on my F250. I was glad I had the experience with the previous brackets on the F150 because the ones for the F250 are a bit heavier and more challenging to install. But I was able to do it with an extra set of hands to hold the brackets on to the frame. The fact that I went with the same Torklift system is a testament to the product. If you can afford aluminum, they’re beautiful and light. But once everything is in place, there’s no functional difference.
etrailer has great installation videos for the F150, but not the F250. I wish they had install videos for the F250 because it’s a bit more challenging, requiring an impact driver to loosen the nut on the driver side leaf spring.
by: Ed F12/28/2019
About a year ago, I purchased the aluminum Talon Torklift Frame-Mounted Front and Rear Camper Tie-Downs. The install was easy taking the better part of a day including a little help from a local automotive mechanic to loosen and retorque the truck’s leaf spring bolts. The Tie-Downs have worked great since installed with no issues. I highly recommend them.
by: Jim clark10/14/2017
Excellent product. Good customer service. I will always use tork lift products from now on.
etrailer is an excellent vendor as well.
I upgraded from happy jack camper tie downs. I like the aluminum talon tork lifts for their easy installation, zero corrosion liability, and unimposing appearance when not in use.
by: Dan P.04/19/2017
It's a little tricky feeding the bolts through the frame (almost lost one, but a little tape on the bolt/spring helped), but a great product otherwise. The mounting scheme for my Chevy 2500 HD is strong and ingeniously designed. No drilling or welding. The aluminum won't rust like other tie-downs mounted to the frame. It was well worth the extra money to get the aluminum version of this product.
by: Kenneth08/18/2022
My salesperson was great, especially with the mess-up in shipping and handling. (Install instructions were not included) Of course, Torklift products are very well made BUT I did have to modify them ever so slightly, probably because my 2016 Ram was put together with a little less accuracy than was needed. Would use etrailer again.
by: Haywood J 10/18/2016
I ordered Camper tie-downs for my new Ram 2500. I erroneously ordered TDL2126A for the front. They wouldn't clear the nurfs. A quick call confirmed that I would need the TDL2127A. I had to pay for the 27As up front and hope when I returned the 26As on an rmer I would receive prompt refunds. Imagine my surprise when they notified me that they received my return and the refund was on its way. These guys are super, especially Brenden C.
ps the Aluminum tie downs are great and the happy jacks awesome!
by: Charles03/01/2018
I purchased the Torklift Talon front and rear TC tie downs and love the fact they are lightweight but yet very strong. Being aluminum powder coated is great being in a salt air environment so no rusting like the steel versions do.
25
94
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Best Camper Tie Downs for a 2015 Ford F-350 Crew Cab 4x4The camper tie downs you referenced, # TLC2214A, are designed for various GM trucks and will not fit your 2015 Ford F-350. But not to worry because we have options for your truck as well. I have included a link to them for you to the right. You will need to use the drop down menu (Select Vehicle Style) near the top of that page to select the version of the truck you have to see the available options. Front and rear tie-downs are listed together.
view full answer... - Will the TorkLift Talon Camper Tie-Downs Fit 2016 Ford F-250 with 8 Foot Bed and Factory HitchYes, the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLF2016A (for the front) and # TLF3001A (for the rear) are confirmed to fit the 2016 Ford F-250 Super Duty, 8 foot bed, with factory hitch installed, as long as there is no board or step underneath the truck bed. The factory receiver hitch needs to have an open-ended crosstube to be compatible with these tie-downs. The installation instructions for each set of camper tie-downs is linked to this page for you.
view full answer... - Camper Tie Down Recommendation for 2014 Ford F-250 SDThe best camper tie downs for your Ford F-250 Super Duty 4X4 with an 8’ box will be the Torklift Custom Fit Tie downs part numbers # TLF2016 and # TLF3006 or the aluminum versions part # TLF2016A and # TLF3001A. These are custom fit for your vehicle's frame so they will install the easiest, give you the best fit, and provide the strongest and most stable attachment. For turnbuckles to attach the camper to the tie downs you'd then want the Torklift FastGun Turnbuckles # TLS9529-2-LK and...
view full answer... - Custom Fit Camper Tie-Downs for 2016 Ford F-350 Long Bed with Factory Hitch and No Running BoardsThank you for providing all of that information about your 2016 Ford F-350. For your model with the long bed, no steps or boards, and the factory trailer hitch there are 2 options. First for steel tie-downs I recommend # TLF2016 for the front and # TLF3006. These tie-downs were designed to fit your specific truck configuration. If you want to go with the more corrosion resistant steel and aluminum set then I recommend # TLF2016A for the front and # TLF3001A for the rear. And for either...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rick W.
12/9/2017
The tie downs have proven to be super