TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1505 reviews)
Price: $387.71
Need help with installation?
Locate installers near me- All Info
- Reviews (1505)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C3214 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLC3214
This Product Fits The Following Vehicles
- 2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed - Crew Cab - without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 GMC Sierra 1500 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 GMC Sierra 1500 8 Foot Bed - Regular Cab - without board or step underneath truck bed and with a factory installed hitch
- 2019 - 2019 GMC Sierra 1500 Limited 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed - Crew Cab - without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 Chevrolet Silverado 1500 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2014 - 2018 Chevrolet Silverado 1500 8 Foot Bed - Regular Cab - without board or step underneath truck bed and with a factory installed hitch
- 2019 - 2019 Chevrolet Silverado 1500 LD 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLC3214
Average Customer Rating: 4.7 out of 5 stars (1504 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Richard04/14/2024
Easy to use and attach when needed. Recommend the product and the service provided by etrailer and Jessie
by: Paul 03/28/2024
Very easy to install Done in about an h our
by: Charles F05/23/2020
Jason was great to work with on getting the proper camper tie downs for my truck as it was a new truck and was a bit confused as to the proper application.
I had them installed within an hour. Even an armature bolt twister could do this!
I have used my camper a lot since putting these on my truck and will tell you these are THE MOST SECURE ANCHORS I have ever used on any of my trucks PERIOD!
You will not make a bad decision going with this product. I recommend these tie downs over any product available! I Don't normally give recommendations or endorse products. These I am truly impressed with.
by: GIBBY05/08/2015
1ST CLASS PRODUCT!!! FIT & FINISH WERE EXCELLENT!
ASSEMBLY INSTRUCTIONS WERE VERY CLEAR AND EASY TO FOLLOW. PICTURES WOULD BE A WASTE OF TIME & BANDWITH. SEE MANUFACTURE'S U-TUBE VIDEO.
PAPER WORK INCLUDED IS REALLY ALL YOU NEED.
BUY SOME MM DEEP WELL & REGULAR SOCKETS WITH Impact Swivel TO USE WITH AIR WRENCH - PNEUMATIC GUN.
by: Travis03/24/2023
Awesome!!!! Worth every penny!!!!
by: Thomas 10/12/2021
Bought these with the front tie-downs and I'll give this the same review. Good product, easy to follow directions, and perfect fit.
by: Rick 04/08/2021
Outstanding product. Wondered if it was the worth the extra $’s. Perfect fit,easy install. No doubt its worth the money
by: Pete D08/24/2019
Easy to install stall.Hold the camper down great .
by: John 09/18/2021
by: Randy 01/21/2024
by: David11/07/2021
Exactly as described and as usual fast shipping.
by: Colt 05/06/2024
by: Luci04/03/2023
by: William 01/22/2023
by: Greg 10/11/2021
by: Family10/03/2022
by: Charles 12/21/2022
A little tougher to install than the front ones but not too bad. Torklift tie downs are very well made, tried he bumper attached one but I guess bumpers aren't what they used to be I saw bending at the tie down after one trip. So bought these. Entrailer as usual priced well and fast shipping.
by: Tim C03/03/2024
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
by: Fred06/02/2023
Got the tie-downs today. Shipped quickly. There is an extrusion ridge on the inside of the square tubing my hitch was made from. I had to file that out. Once done, everything slipped together like an Erector-Set project. Whole thing took 20 minutes. Very pleased.
by: Flanagan06/18/2023
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
by: Keith09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
by: Stacey07/12/2023
Poor packaging, missing parts and showed up looking used from being beaten in shipping.
by: James02/02/2024
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
by: Richard02/14/2024
The rear tie downs do not extend out far enough to avoid the dully rear fender and has damaged the paint on the fender.
by: Jennifer03/21/2021
My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
25
1504
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Front TorkLift Camper Tie-Downs Compatible with 2014 Chevy Silverado 1500 Double CabThe TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2217 is the correct fit for 2014 Chevy Silverado 1500 models with 6.5 foot bed regardless of the cab model. Your Double Cab was only available in that bed length for your model year, so these camper tie-downs will fit. For your rear tie-downs you will want # TLR3500 if you have an aftermarket trailer hitch or # TLC3214 if you have the factory trailer hitch. You may also be interested in the TorkLift Locking FastGun Turnbuckles...
view full answer... - TorkLift Camper Tie Downs For 2015 GMC Sierra 1500They will not. For rear tie-downs for the 2015 Sierra 1500, use # TLC2217 for the front tie downs and # TLC3214 for the rear. This assumes your truck has a factory installed hitch and the 6-1/2 foot bed. If you have a different bed length, please let me know. Knowing the cab configuration would be helpful as well.
view full answer... - Torklift Tie Downs that Fit 2019 Chevy Silverado 1500 LDFor your 2019 Chevy Silverado 1500LD short bed with a factory hitch the Torklift tie downs you'd need are the part numbers # TLC2217 and # TLC3214.
view full answer... - Which TorkLift Camper Tie Downs for 2014 Chevy Silverado 1500 Crew CabIt sounds like you're looking for camper tie downs to fit on your 2014 Chevy Silverado 1500 Crew Cab with running boards that extend the length of the cab and a factory hitch. If this is correct, then you'll want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2218 (5-1/2 foot bed) or # TLC2217 (6-1/2 foot bed) for the front tie downs. For the rear tie downs you'll need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3214. If you don't have turnbuckles...
view full answer... - Frame Mounted Tie Downs for a 2017 Chevy Silverado 1500 6-1/2 BedYes, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLC2217 are a confirmed fit for the front of your 2017 Chevy Silverado 1500 with the 6-1/2' bed. In order to choose the correct rear frame mounted tie downs you will first need to determine if you have a factory, TorkLift, or aftermarket trailer hitch receiver. If you have a factory trailer hitch receiver you will want part # TLC3214. If you have an aftermarket trailer hitch receiver such as Curt or Draw-Tite then you will...
view full answer... - Recommended Camper Tie-Downs For A 2018 Chevy Silverado 1500 For a 2018 Chevy Silverado 1500 with a 6.5' bed and running boards that end under the cab you would need the TorkLift Camper Tie-Downs - Front # TLC2217 and Rear # TLC3214. To complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020.
view full answer... - No Drill Frame Mounted Truck Camper Tie Downs 2018 Chevy Silverado 1500 6-1/2 foot bedFor a set of frame mounted tie downs that fit your 2018 Chevy Silverado 1500 6-1/2 foot bed and do not require drilling you'd want the part # TLC2217 for the front set and part # TLC3214 for the rear set.
view full answer... - Recommended TorkLift Camper Tie-Downs For A 2015 Chevy Silverado 1500 The correct fitting TorkLift camper tie-downs for your 2015 Chevy Silverado 1500 with 6-1/2' bed without running boards and factory hitch is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2217 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3214. You'll also bee needing some turnbuckles so I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK. The quick-release levers on these...
view full answer... - Determining the Correct Camper Tie-Downs for a 2018 GMC Sierra 1500For your 2018 GMC Sierra 1500, you can use either the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3214 or the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500 for the rear. The front is a bit more tricky. The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2212 (C2212) do fit the 2018 GMC Sierra 1500, but only if you have the 8' bed, no board or step underneath the truck bed and have a factory or non-Torklift hitch. If you do not have the above style of 2018 GMC Sierra...
view full answer... - Where do Torklift Front Camper Tie Downs Mount on 2019 Chevy Silverado 1500 LDSince we haven't had a chance to install these in our shop, I've attached a couple pictures to show you where the Torklift Front Custom Frame-Mounted Camper Tie-Downs # TLC2217 install on the front of your truck. For the rear, you'll need part # TLC3214. These are confirmed to fit your 2019 Chevy Silverado 1500 LD with the 6-1/2 Foot Bed with no board or step underneath truck bed and with a factory or aftermarket (other than Torklift) installed hitch. For a set of Turnbuckles, I recommend...
view full answer...
- Recommended Camper Tie Downs for a 2015 Chevrolet Silverado 1500 Out of all the Brophy Camper Tie Downs we carry, I recommend the Brophy Clamp On Camper Tie Downs # HSSF. I recommend these tie downs as they can fit beds with spray in liners and are the most popular Brophy Tie Downs we offer. To make sure these tie downs will fit your truck bed you will need to take a few measurements. The width of your bedrail cannot be larger than 5-1/2" and you need at least 2" of space beneath the lip of the bed rail. You also cannot have plastic bed rails, double-walled...
view full answer... - Camper Tie-Downs For 2015 GMC Sierra 1500 Pickup TruckThe camper tie-downs we offer for your 2015 Sierra are the TorkLift Custom Frame-Mounted Camper Tie-Downs, part # TLC2217, and part # TLC3214. These brackets mount to the truck frame and are a nice tight fit so you do not have to worry about ground clearance. This system includes the front brackets, rear brackets, and all of the needed hardware for installation.
view full answer... - TorkLift Custom Fit Camper Tie Downs for a 2014 Chevy Silverado 1500 Crew Cab 6 Foot BedI checked with TorkLift and for front camper tie downs for your 2014 Chevy Silverado 1500 Crew Cab with 6 foot bed and cab-length running boards use # TLC2217. For the rear, if you have the factory trailer hitch you can use tie downs # TLC3214. If you have an aftermarket hitch use # TLR3500. For turnbuckles you can use the basic set # TLS9000. The next step up from there are the spring-loaded ones, # TLS9050A, sold in a quantity of 2. And the top of the line set is the locking FastGun...
view full answer... - Camper Tie Downs for Palomino SS-1251 in Bed of 2017 Chevy Silverado 1500For a camper that long I would recommend going with tie downs that attach to the truck frame instead as that's a much more secure mounting point for it. For that you'd need the # TLC2217 and # TLC3214 which is custom fit for your 2017 Chevy Silverado short bed without boards and a factory hitch. Then for turnbuckles you'd just need the part # TLS9529-2-LK for a set of stainless steel ones with locks integrated.
view full answer... - Air Bag Kit and Torklift Tie Down Recommendation for 2014 Chevy Silverado 1500 6-1/2 ft BedFor your 2014 Chevy Silverado 1500 we have the Firestone kit part # F2430 which is a confirmed fit and would work well for additional suspension support with the camper. You may also be interested in the compressor kit part # F2158 will make maintaining and inflating the bags easy. For camper tie downs we have the Torklift Custom Set part numbers # TLC2217 and # TLC3214 which is a confirmed fit for your truck. For turnbuckles you'd then want the Fastgun set part # TLS9529-2-LK which will...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Written by:
Laura H
Video Edited:
Dustin K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.