Summer Starts Here - Save up to 70%
This portable hand grip gives you an extra handle for leverage where you need it. It attaches to glass, fiberglass, metal, and most plastics with a 6" vacuum cup and it only takes seconds to install and remove. Supports up to 210 lbs.
Features:
Specs:
This vacuum cup-mounted hand grip puts leverage wherever you need it. It's great for steadying yourself when getting on or off your boat. It mounts to most glass, fiberglass, metal, and plastic surfaces.
This hand grip is quick and easy to mount. To install the hand grip make sure the mounting surface is clean and place the vacuum cup on a vertical, non-porous surface on your boat then press the pump several times until the orange band disappears. To break the seal and remove the handle from your boat simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at the SeaSucker handle. This hand grip is great for steadying yourself. It's really nice for getting on and off the boat and for cleaning the boat. The unit's made from a 3/4" white StarBoard and offers plenty of space to grab onto. You can see there, you get four fingers in there, nice wide range that way they don't get stuck. So, it's a nice large opening, very easy to grab onto and to grip.
The handle installs quickly and easily. It's gonna feature the 6" vacuum mount. It's gonna have a pull rating of 210 pounds. It'll work on a wide range of surfaces including glass, fiberglass and metal. When it's fully installed, it's gonna have an overall height measurement of about 2 3/8", 6 1/2" from edge to edge and then again the diameter of this, when it was fully installed is about 6" in diameter.
The unit also comes with waterproof lubricant to keep the SeaSucker components working as they should. It's a very strong and durable design and it's made right here in the U.S.A. When you're ready to install it, you need to make sure that the vacuum mount is clean and at that the mounting surface is clean, place this on and then simply just use this plunger to start creating the seal. You'll know that it's fully seeded when that orange portion is no longer visible. So, when that's no longer visible the units fully installed and ready for use. When you're ready to remove it, it's got these grips, right here, one located on each side.
Just press on that and that's gonna break the seal, allowing the unit to easily be removed from the mounting area. That's gonna do it for today's look at the SeaSucker handle.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.