Long Arm Set for Lockrack Watersport Carrier - Closed Angle - Short Shaft - Qty 4

Video Transcript for Review of Lockrack Long Arm Closed Angle Set 15-3/4 - 21-5/8 Inch Base - LR99FR

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a real quick look at this Lockrack Long Arm Set. Now this set of long arms are going to work with your Lockrack system to safely secure equipment to the roof of your vehicle. And the closed angle is going to be perfect for securing your racing, standup paddle boards. Now, these are going to fit Lockrack bases that are from 15 3/4 inches long, to 21 5/8 inches long. And the ratcheting system, or design, is going to allow these arms to accommodate a tight hold on most watercraft.

That's gonna help prevent crushing damage to your equipment that can occur with conventional strap systems. Now, this rubber covering is going to protect your equipment against scuffs and scratches and dings. It's a very thick covering, so I think that's going to hold up really well for you for many, many years to come. So it's gonna do a great job of protecting your watercraft. And I went ahead and took some measurements of these arms before our time together.

So let me go ahead and verify those measurements for you. So, obviously the measurements I'm giving you are without the base, it's just the measurement of the arms themselves. Again, just to kind of give you an idea of the size. So looking at the overall height, as you can see we are sitting right at 12 1/2 inches tall at the tallest point. And then looking at the overall length, and I probably, the best way to measure it, I'm just going to measure from the top here all the way to the corner.

Let's see if I can show that to you there. So we are sitting right at about, right at about 18 1/2 inches long, if you can see that there. From the tip here all the way to the bend. So hopefully that kind of gives you an idea of the size of these arms. And these are constructed of lightweight aluminum.

They're gonna be very durable, but lightweight. And then also they're gonna do a great job of resisting rust and corrosion since they are aluminum. And you are going to receive what you see here on the table. You're gonna receive four of these arms. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.