Phat 9 Fat Bike Adapter Kit for Kuat Trio - 9 mm x 135 mm Forks

See what our Experts say about this Kuat Accessories and Parts

• Fork Adapters for a Kuat Trio Roof Bike Rack Part # TR02
  The Kuat Trio Roof Bike Rack part # TR02 comes with a 9x100, 15x100, and 15x110mm Boost fork adapters. There are however additional adapters available if needed which I have listed for you below. 9mm x 135mm QR - part # TRP9 12mm x 100mm Thru-Axle - part # TRFA12X100 15mm x 142mm Thru-Axle - part # TRP15-142 15mm x 150mm Thru-Axle - part # TRP15-150
  view full answer...
• Fork Mount Roof Rack Bike Rack Recommendation for 135 mm and 150 mm Axles
  Sounds like you are looking for a roof rack bike rack that will fit forks that are 135 mm and 150 mm axles. For that you would want the Kuat Trio part # TR02 with the adapter part # TRP15-150 for a 15 mm diameter 150 long axle and then part # TRP9 for a 9 mm diameter axle 135 mm long.
  view full answer...
• Specialized Fatboy Fork Adapter for 135mm Hub Spacing
  If your Specialized Fatboy does indeed have a 135mm hub spacing then Kuat adapter # TRP9 would fit since it is specifically designed for 9mm by 135mm forks. The only other, longer adapters fit 15mm forks so they would not work.
  view full answer...
• Fit Kuat Trio Roof Mount Bike Rack and # TRP9 Phat 9 Fat Bike Adapter with Surly Moonlander
  According to Surly, their Moonlander uses a 10mm axle. The Phat 9 Adapter kit you mentioned, part # TRP9 is the correct adapter kit for the Kuat # TR02 or # RU01 Trio roof mount bike racks. We do indeed offer a roof mount bike rack that's compatible with Fat Bikes without needing an adapter. Take a look at the Rhino-Rack Hybrid, part # RRRBC050-FB. The rack holds the bike by the front wheel using a ratcheting hook and a wheel strap for both the front and rear wheels. No need to remove...
  view full answer...
• Connecting my 9mmx135mm Bike to a Track Mount Bike Rack for Truck Beds
  I have a solution but the RockyMounts LoBall Bike Rack for Truck Bed Factory Track Systems part # RKY1097 does not have an adapter to allow you to connect your 9mmx135mm skewer. Instead you can use the RockyMounts DriveShaft Track Truck Bed Bike Rack part # RKY1086 and the Phat 9 Fat Bike Adapter Kit for Kuat Trio part # TRP9. This will install on your bike then allow you to clamp this dummy axle into the Driveshaft securing your bike. Check out the video below on it.
  view full answer...
• External Diameter for Phat 9 Fat Bike Adapter Kit for Kuat Trio
  The Phat 9 Fat Bike Adapter Kit for Kuat Trio - 9 mm x 135 mm Forks # TRP9 has the following external diameter dimensions. At the thickest, it is 24.9 mm. In the center it is 23.9 mm. At either end it is 19.7 mm. I've attached a photo to assist. The manufacturer does not recommend using it with another rack as it is designed specifically for the Kuat Trio # TR02 or # RU01. They can't confirm it will be compatible with any other rack.
  view full answer...
  
• Do I Need An Adapter To Carry My RadRover 6 Plus With A Swagman Patrol 2 Bike Rack for Truck Beds
  I spoke with someone from RadRover about your forks axle length and I have one solution and I might have a second solution. My recommendation would be to get the Kuat Dirtbag Phat 9 Fat Bike Rack - Fork Mount - Bolt On - 9 mm Quick-Release Skewer, part # DRT9P. It is designed for fat tire bikes with 9mm quick release skewers. It is a permanent mount, so if you do not want to install it directly to your truck bed, you could probably affix two of them to a 2 X 4. If you are not interested...
  view full answer...

Do you have a question about this Accessories and Part?