Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
(13 reviews)
Price: $14.24
In Stock
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Item # C51459
Retail:$30.06
Our Price: $14.24
You Save: 53%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
CURT Accessories and Parts - C51459
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- CURT
- Vehicle Specific
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port behind your vehicle's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connectors plug into the built-in port underneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from Curt
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 2' Long, 12-gauge wires have protective covering to deter damage
- Limited 1-year warranty
Installation of Curt Brake Controller Adapter
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the connector underneath your vehicle's dashboard, located to the right of your steering wheel.
No hardwiring is required to install this adapter. After you plug it into your vehicle's connector, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
51459 Curt Quick Plug Brake Control Adaptor Harness
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2022 Jeep Cherokee with factory Tow Package
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Too difficult to install
Customer Reviews
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51459
Average Customer Rating: 4.6 out of 5 stars (13 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port behind your vehicle's dash.by: Rick03/12/2017
The trailer break came on time and was a good price.
by: Terry03/09/2022
I was very pleased with my purchase of the wiring adapter. Plugged right in,and works great! I was also pleased with the follow ups after I placed my order. Tracking was provided and even contact information, if I had a question. Arrived in time and no surprises. Thank you!
by: Josh08/13/2019
Product was as expected. Easy install, plug and play. If your buying a curt brake controller it’s a no brainer to buy this.
by: Jack H06/16/2017
2008 Chevrolet Silverado
The controller came and I installed it and it seems to work fine. The installation instructions were minimal but found a totorial on you tube and followed it and the installation appears successful
by: Kenneth09/25/2019
Jeep
Super easy plug and play install on 2020 Jeep Gladiator
by: Phillip 07/29/2020
This made the installation can breeze. Wish it was a little longer but that's just a minor complaint.
by: Cynthia09/03/2019
My brother in law installed this for me and he was thrilled. He said it was easy and went in very quick. It is working great.
by: William08/11/2020
2016 Jeep Cherokee
Great Service with informative product descriptions
by: Misty 06/12/2021
Fast shipping, easy to install, works g reat
by: san06/06/2016
So far so good
by: William04/22/2023
by: Jose 04/05/2024
by: John 03/27/2021
13
13
See what our Experts say about this CURT Accessories and Parts
- Will the Curt Echo Under-Dash Trailer Brake Controller Fit a 2018 Jeep CherokeeThe Curt Echo Under-Dash Trailer Brake Controller part # C27JR is an excellent option for a 2018 Jeep Cherokee and can be installed on models with the factory tow package using the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51459 which allows for a plug and play install. I have attached a review video I did below on this brake controller.
view full answer... - Hub/Drums and Brake Assemblies for Use with Timbren 3,500 lb Axle LessAll of the parts you mentioned would work great with each other. You didn't mention the part numbers but I was able to determine what you were looking at based on title. The Timbren kit looks to be the part # TASR35HDS11 Hubs # AKHD-655-6-EZ-K Brake assembly set # 23-458-459 Curt Discovery # C84VV Install Harness # C51459
view full answer... - Parts Needed To Install Curt TriFlex Trailer Brake Controller In 2021 Jeep Grand Cherokee W/ Tow PkgYou can absolutely move the Curt TriFlex Trailer Brake Controller # C24VV from your 2016 Jeep Cherokee Trailhawk to your new 2021 Jeep Grand Cherokee with the factory tow package, but you will need a different plug in adapter. As long as the controller is still working fine there is no real benefit in replacing it. For your Grand Cherokee you will need the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51446 which will plug into the factory trailer brake controller port underneath...
view full answer... - How To Use a Tekonsha Prodigy P3 On a 2020 Jeep GladiatorIf you wanted to use the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 2020 Jeep Gladiator then you would need to cut off the end of the plug under your dash and wire in the one that comes with the brake controller or you could use the Curt Custom Wiring Adapter part # C51459 and cut off the brake controller end in favor of the one that comes with the brake controller so no vehicle slicing is required. There is not yet a Tekonsha adapter plug available for your 2020...
view full answer... - Can Tekonsha Primus IQ Brake Controller Install in 2020 Jeep WranglerIf you wanted to use the Tekonsha Primus IQ part # TK90160 on your 2020 Jeep Wrangler then you would need to cut off the end of the plug under your dash and wire in the one that comes with the brake controller or you could use the Curt Custom Wiring Adapter part # C51459 and cut off the brake controller end in favor of the one that comes with the brake controller so no vehicle slicing is required. There is not yet a Tekonsha adapter plug available for your 2020 Jeep Wrangler as of July...
view full answer... - Recommended Brake Controller Wiring Harness for 2018 Jeep Cherokee with Factory Tow PackageI did not find your order based on your email address, but if you have a Tekonsha or Draw-Tite brake controller you will use wiring adapter # 3014-P. If you have a Curt brake controller, you will use wiring harness # C51459. For any other controller I recommend using the pigtail # 3014-S. The connector is behind the black cover located to the left of the steering column, just above the carpet. It will have a cover that will need to be removed. I've attached a photo to assist.
view full answer...
- Can Curt Spectrum Install in 2019 Jeep Cherokee with Factory 7-WaySince you installed the factory 7-way setup on your 2019 Jeep Cherokee all you need to install the Curt Spectrum part # C51170 is the install harness # C51459 and you'd be set.
view full answer... - How To Install Curt Brake Controller On 2018 Jeep Cherokee with Tow PackageThe Curt TriFlex Trailer Brake Controller part # C24VV with Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51459 is an excellent option for a 2018 Jeep Cherokee with tow package. The brake controller will mount on the dash within reach and then the custom adapter will plug into the rear of the controller and then the tow package port on the vehicle which is located underneath the dash, just to the left of the steering wheel, taped to another harness near the emergency...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Video by:
Joshua S
Video Edited:
Dustin K
Installed by:
Cole B
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rick
3/12/2018
yes