Quick Connect Coupler for Bulldog Winch Air Tank Hose - 3/8" NPT - Female

Video Transcript for Review of Bulldog Winch Air Suspension Compressor Parts - Quick Connect Coupler - BDW42040

Hey, everyone. I'm Ellen, here at etrailer.com.Today, we're taking a look at the Quick Connect Coupler. This is going to help you to make a connection to your air hose on your Bulldog Winch Air Tank, or anywhere that uses that quick connect coupler style connection. It's pretty industry standard.This is going to have a 3/8 of an inch female NTP end here, or a 3/8 of an inch NTP female end. And, again, the way this is going to work, it's just going to connect it to the stud. So pull the collar back on the coupler, put those two together.

It should kind of snap into place, and now you've got that nice tight connection without having to worry about screwing anything down.Even if you're wearing gloves, or maybe your hands are wet or muddy, you shouldn't have any issues getting that connected and disconnected. You can see. Pull that collar back, it springs the stud out. So it makes it a nice, easy, quick installation, or a connection between those two.As far as the size of this connector, it's about 1-7/8 inches long. And then the hex side here, that has a width of 3/4 of an inch.

So a 3/4-inch wrench should tighten that down on wherever you're mounting it. That's pretty much going to do it, for our look at the Quick Connect Coupler for your Bulldog Winch Air Tank hose.If you need any other fittings, or couplers, or studs, or anything like that, we have a lot of options available here at etrailer.com. So check them out. Thanks for watching.