Replacement Parts for 16K B&W Continuum Weight Distribution System w/ Sway Control

Question

Question:

Replacement parts for BW28FR?

asked by: Adam

0

Expert Reply:

The B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch # BW28FR can be broken up into 2 replacement part kits:

- Head Assembly # BW48FR
- Load Bars # BW38FR

expert reply by: Jon G

0

Answer 1

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 2

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 3

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 4

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 5

Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…

view full answer...

Answer 6

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 7

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this hitch and…

view full answer...

Answer 10

No, I am sorry Chris it can not. The TorkLift SuperHitch Everest Weight Distribution System item #TLWD1000 can only be used with the TorkLift SuperHitch Magnum Trailer Hitches, like item #TL74FR that fits your 2024 Chevy Silverado 3500. It is because…

view full answer...

Answer 11

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 12

Sorry Chris but they have not. I checked with B&W and they only offer the B&W Continuum Weight Distribution Head Assembly item #BW68FR that comes with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...