Customers compare ARK54FR to these similar products
Products Featured in this Video
Shane: Hey, everyone. Shane here with etrailer.com. Today we're going to be taking a look at the Ark Extreme Off-Road Trailer Jack. This is going to be a 500 series jack. It's going to have an 1100 pound weight capacity. The reason it is determined to be an off-road jack is the construction of it, the adjustability, and the wheel size.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting…
view full answer...The ARK #ORJW1SU Off-Road trailer jack will need about 21-3/4 inches of available space on the trailer tongue. I wasn't able to make out the dimensions on your tape measure in the photo, so I couldn't say judging by that if…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...When folded up and traveling the Xtreme Off-Road Ratcheting Trailer Jack item #ORJW750BD is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is…
view full answer...First you would need an engine oil cooler kit. I recommend #D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not…
view full answer...The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…
view full answer...I reached out to Ark Corportation and they confirmed that you can use either the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW750D or Extreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels #ARK54FR to launch your sailboat and trailer…
view full answer...The Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels #ARK54FR will hold in place when pushing up the slope. If you're going down the slope the mechanism will not hold it is place, as the wheel is designed to free spin in the direction of…
view full answer...When the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is in the forward position the wheel can move only one direction and it can keep moving forward without the handle moving it. It wouldn't roll back if in forward but if you were…
view full answer...The Extreme Off-Road Ratcheting Trailer Jack part #ORJW1SU has a 770 lb weight capacity which means so long as the tongue weight of the trailer does not exceed this then you'd be fine. A trailer with GVWR of 4,000 lbs would be no worry at all.
view full answer...The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…
view full answer...There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…
view full answer...