Customers compare ARK54FR to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at the Ark Extreme Off-Road Ratcheting side-wind trailer jack, with the dual wheels. Now, this is an Xtreme Off-Road Series Ratcheting Trailer Jack. It is perfect for anyone who needs a swivel wheel trailer jack, that can handle the elements in any off-road conditions. This is a nice sturdy jack. It'll support, lift… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting…
view full answer...When folded up and traveling the Xtreme Off-Road Ratcheting Trailer Jack item #ORJW750BD is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is…
view full answer...I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall…
view full answer...The Extreme Off-Road Ratcheting Trailer Jack part #ORJW1SU has a 770 lb weight capacity which means so long as the tongue weight of the trailer does not exceed this then you'd be fine. A trailer with GVWR of 4,000 lbs would be no worry at…
view full answer...Per the manufacturer The Xtreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind #ORJW1SU has a clearance of roughly 61.55 mm or 2.4 inches. So it will work on your frame. The jack has a sturdy steel construction which is durable and built to…
view full answer...When the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is in the forward position the wheel can move only one direction and it can keep moving forward without the handle moving it. It wouldn't roll back if in forward but if you…
view full answer...The best way to jack up a boat trailer with torsion axles, or straight axles for that matter, is to use a trailer jack that is rated high enough for the weight of the trailer at the point the jack is installed. Going with a higher capacity than…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...The Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels #ARK54FR will hold in place when pushing up the slope. If you're going down the slope the mechanism will not hold it is place, as the wheel is designed to free spin in the direction of…
view full answer...The Extreme Off-Road Ratcheting Trailer Jack #ARK54FR is going to be our tallest side wind pivoting jack that will mount the side of the boat trailer frame. This jack will extend to 32-1/4" from the center of the mounting point on the jack to…
view full answer...The mounting plate of the Extreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels #ARK54FR is steel so you could weld it to your trailer frame. There isn't a version of this though that has a smaller mounting base/bracket.
view full answer...Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.
view full answer...