CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32110G Review Video

Jack #DL22210 isn't a snap ring jack but we do have other options that will likely work with your existing mount such as #FTJ120W0301. The hole spacing for the pull pin is 3 inches apart on center. I have linked a video review of this jack for…

I went out to the warehouse to measure the internal width of CE Smith roller #CE32110G. It measure 1-7/8 inches. I have included a picture showing this measurement for you.

We don't offer a flat roller assembly, but the 5 inch #CE10401G assembly has a roller that's more flat that might work well for you. The flatter profile would spread more of the boat's weight out over a larger area.

We do not offer U-bolts for the CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 4" #CE32110G, and the mounting holes for these are 2-1/2" apart on center and there is a better option for you. I…

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

The Yates Flat Bow Stop, #YRJONBLOCK, requires a 1/2 inch diameter shaft like #CE10700A. The bracket you mentioned, #CE32004G, takes a 5/8 inch diameter shaft so a 1/2 inch diameter will fit but it will be loose. Out of the parts that we carry this…

We do not carry the brand tires you said you have on your jet ski trailer so I cannot provide much information about their performance. We do have radial tires that would work for your trailer if that is the way you want to go. You can expect a…

You are definitely going to need radial tires for highway speeds and the best option is the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C. Radial trailer tires are constructed in a manner so they have cords which run at 90 degrees to the direction…

The Kenda Karrier ST175/80R13 Radial Tire and Wheel #AM31990 that you referenced does not come balanced but it also doesn't need to be. Trailer tires are built and ride much differently on the road than standard passenger tires. Because of the…

A higher load range tire has a higher ply rating but it will also produce a rougher ride and could have a psi rating that exceeds the capacity of the wheel or, more likely, the valve stem. The size you have now, 225/75-15 load range C, is rated for…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

I went out to the warehouse and pulled a Offset Spool Roller Assembly, #CE32150G. Measuring from the bottom of the base to the top of the roller in the center section it is 3-3/8 inches. From the bottom of the base to the taller part at either end is…