Curt 20x48 Hitch Cargo Carrier Test Course Video

You will need to measure the distance from the center of the hitch pin hole out to the distance required to clear the spare tire. If that distance is less than 5 inches, then the Curt 20x60 Folding, Aluminum Cargo Carrier, #C18100, will fit when in…

When folded down, the distance from the hitch pin hole to the edge of the 19x60 Curt Cargo Carrier, #C18100, measures about 8 inches. Please keep in mind that since you plan to use this carrier on the back of your camper, you will experience…

When folded up the Curt cargo carrier part #C18100 has 4-1/2 inches from the center of the hitch pin hole to the nearest rail of the carrier. If the distance from your hitch pin hole out to the furthest point out on your rear bumper is less than that…

When the Curt Cargo Carrier part #C18100 is folded down there is a distance of 10-3/4 inches from the center of it's hitch pin hole to the nearest edge of the carrier platform. To determine where that would be in relation to the truck bumper you…

Yes, the Curt hitch part #C11391 that you referenced does fit your 2014 Honda Civic SI Sedan. I attached a picture of this hitch and install video of it on a 2015 Honda Civic Sedan SI just like yours.

The highest capacity hitch for your 2016 Kia Soul is going to be the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" item #306-X7326. This custom fit hitch bolts to your 2016 Kia Soul with included hardware. It has a maximum gross…

For your 2016 Kia Soul, I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7326. This is the only class III hitch we have for your 2016 Soul. The reason a class III is better, is because the 2" x 2" receiver opening found on class…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in the…

We do have trailer hitches to fit your 2019 Mazda CX-3 that are similar to the part #90092 that you referenced. The available hitches for the 2019 CX-3 are the 1-1/4-inch size like #90092 but they are lighter-duty Class I hitches. There are not any…

The overall width of the Draw Tite hitch is 41 inches, the depth front to back is 21 inches and the height is 8 inches. The weight is then 37 lb. Based on the standard checked back dimensions I believe this would be too large. Weight should be fine…

If your 2011 Toyota RAV4 has a 2-inch hitch receiver like Curt #C13149 then the etrailer Folding Cargo Carrier #e98874 will fit the hitch and will clear the rear of the vehicle even when folded. The etrailer cargo carrier #e98874 provides 9-1/2…

The bottom of the receiver portion of trailer hitch #24933 for your 2017 Mazda CX-3 will be approximately 9-1/2 inches up from the ground. There are some parts of the vehicle that hang a bit lower on the vehicle itself but as far as at the end of the…