Customers compare LC324269 to these similar products
Products Featured in this Video
Hello, everybody, this is Jeff from etrailer.com. Today we're going to take a look at this Replacement Foot Pad for the Lippert Components Hydraulic Ground Control Leveling System, and it is for a quantity of one foot pad. This will replace the foot pad on your Lippert Components Hydraulic Ground Control Leveling System. It does include everything shown here on the table. The foot pad, it comes… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube…
view full answer...I suggest using a strap wrench to hold the cylinder side while tightening the installation hardware on the Replacement Foot Pad, #LC324269.
view full answer...The exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use #LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will…
view full answer...Yes, you'd need to hold the inner jack leg while you remove the bolt from the bottom when replacing the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System part #LC324269. In order to hold the inner jack leg, I recommend…
view full answer...The fan of the MaxxAir MaxxFan Trailer Roof Vent w/ 12V Fan - w/ Rain Cover #MA00-06200K draws 5 amps. In theory a 750 amp battery would power this for 150 hours.
view full answer...If your 2021 Jayco Greyhawk Prestige has hydraulic Lippert Ground Control leveling system then yes the replacement feet part #LC324269 would be correct. I attached a picture of what the jack leg should look like.
view full answer...For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure to…
view full answer...You'll have to hold the leg of your jack still so that you can unscrew the bottom of the foot pad to replace it. If you have a large set of channel locks you could do this pretty easily with them. The trick will be hold it tight enough to keep it…
view full answer...Yes, the Replacement Foot Pad for Lippert Hydrualic Leveling System #LC324269 will work with your Lippert Level Up system, on your 2018 Coachman SportsCoach 407FW. I have attached a picture of this foot pad being used on a Level Up system.
view full answer...Thanks for the picture! I took a look at what we got for your 2018 Thor Palazzo Motorhome, and it appears you need the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269. This replacement will replace the foot pad for…
view full answer...You shouldn't really have any play with the Easy Grease Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. If you are getting play in it then the bearings most likely are either not set correctly or were the incorrect choice for your axle's…
view full answer...The feet on your motorhome's landing gear should not be bent at all, and for a SnapPad like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet #SP54FR4 you're looking to fit, it's going to need to be…
view full answer...