Can etrailer e98903 Class III Hitch Be Installed on 2020 Chrysler Pacifica Without Using a Lift

Question

Question:

can 2020 Pacifica 2 hitch be installed without car on lift?

asked by: James M

0

Expert Reply:

You can check out the video that I've linked for you that will walk you through the install. As you'll see, the install involves removing and trimming an under body panel and heat shield as well as temporarily lowering the exhaust which would be very hard to do unless at least the rear of the vehicle was raised in some manner. I'd recommend using ramps or putting the rear of the vehicle up on jack stands so you can have more room to work with.

If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 119250KIT for Hybrid models,
# 118712 for Touring Plus, Touring L, Touring L Plus and Limited models. For LX or Touring models, you'd use part # 118723. For a ball mount, use # D-28 and a # PC3 hitch pin and for a trailer ball use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball.

expert reply by: Mike L

0

Answer 1

For your 2021 Chrysler Pacifica Hybrid the etrailer #e98903 is a confirmed fit and would work great. At this time (January 2021) it's the only option.

view full answer...

Answer 2

When the etrailer hitch part #e98903 was installed here we found that it measured 5 inches from the center of the hitch pin hole out to the rear bumper edge. Since that's not enough clearance for the Inno #INH540 and none of our other hitches…

view full answer...

Answer 3

In order to tow a trailer with your 2017 Chrysler Pacifica you will need a trailer hitch, wiring harness, and ball mount/hitch ball combo. Based on my research the factory tow package can vary a bit depending on what "group" is selected but…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C13383 is a fit for your 2019 Chrysler Pacifica and the trailer hitch I recommend for you because it has a 2" receiver tube opening and is a custom fit so no drilling is required. The hands free liftgate…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...