Which Hollywood Racks Bike Rack Can Be Used to Carry E-Bikes

Question

Question:

I bought a hollywood rack does it hold an Ebike Magnum Cruiser

asked by: Arie R

0

Expert Reply:

If the Hollywood Racks bike rack you bought was the Hollywood Racks Destination # HLY94FR then this most likely won't work well for you since it has a 35 lb per bike capacity but instead if you bought a Hollywood Racks E-bike rack like the # HLY84FR which has the higher weight capacity needed you'd be good.

expert reply by: Jameson C

0

Answer 1

When it comes to construction and the powder coat, both the Hollywood Racks SportRider SE2 #HR1000Z and the Swagman Chinook #S64683 are both made of steel and will come with a heavy powder coating on them to help fight off corrosion. Additionally,…

view full answer...

Answer 2

The Swagman Current Bike Rack #S64678 will definitely fit with the OEM 2" hitch receiver on your 2021 Subaru Outback Wagon. With that being said, I actually recommend going with the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR instead.…

view full answer...

Answer 3

There are indeed two trailer hitches from Draw-Tite that are designed to fit your 2020 Subaru Forester; the Class III #76271 and the Class II #36671. Both hitches will install/mount in the same manner to the vehicle's frame rails, but where they…

view full answer...

Answer 4

You will be able to use the shorter of the arms on the Swagman Current #S64678 to secure your Rad City with the step-thru frame so that you don't have to use an adapter. One arm is longer and is "supposed" to be on the bottom so that 2…

view full answer...

Answer 5

The Hollywood Racks Destination Bike Rack for 2 Bikes #HLY94FR will fit a 2021 Toyota Prius Prime if the end of the bumper measures less than 9-1/4 inches from the distance from center of hitch pin. As far as the weight, the Destination has a maximum…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...