2 Inch Hitch for 2013 Ford Fusion

Question

Question:

I am looking for a trailer hitch with a 2 receiver for a 2013 Ford Fusion SE. I found one on your sight but the picture is of a 2020 Ford Fusion. Please send me a link to a trailer hitch with a 2 receiver for a 2013 Ford Fusion SE. Thanks

asked by: Eugene G

0

Expert Reply:

We do indeed offer a hitch for the 2013 Fusion, part # 306-X7239. The only install video we have shows the hitch being installed on a 2020 Ford Fusion, but EcoHitch does confirm that the # 306-X7239 hitch fits all models of the 2013-2016 Fusion, and all models of the 2013-2020 Fusion except for the sport.

If you'll be towing with the hitch, you'll need a trailer wiring harness like # 118574, a ball mount like part # 40346, a # PC3 hitch pin and for a 1-7/8 inch trailer ball, part # 19260 or # 63845 for a 2 inch ball.

I've linked to the install video for the hitch, the procedure for a 2013 Fusion would be identical.

expert reply by: Mike L

0

Answer 1

The Curt Hitch part #C12091 would be a great solution for your 2020 Ford Fusion if the Kuat bike rack can fit a 1-1/4 inch hitch. If instead the bike rack only fits the larger 2 inch hitch size the EcoHitch part #306-X7239 would be what you'd…

view full answer...

Answer 2

I have a solution for carrying bikes with your 2013 Ford Fusion, but there are no trunk mounted options that have been confirmed to fit your vehicle. Instead I would recommend a hitch and hitch mounted bike rack. Hitches provide basically the best…

view full answer...

Answer 3

Trunk-mount type bike racks are not the best choice for your 2013 Ford Fusion since the car's thin trunk sheet metal and/or its hinge could be damaged by the weight of the bikes. Thule and Yakima do not recommend any trunk racks for your car for…

view full answer...

Answer 4

Our trailer hitches are designed with the towing capacity of the vehicle they are intended for in mind, but they are then rated separately which is why you'll see a lot of time our hitches having higher towing capacities than the vehicles they…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

2 Inch Hitch for 2013 Ford Fusion

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching