Ways to Install New 4-Pole Trailer Connector
Question:
I have to replace the connector on my trailer which is a four way flat. The wires coming off trailer are white, and a yellow/brown, and green/brown. How do they tie in with the new connector which has a white, brown, green , and yellow wire?
asked by: Doug
Expert Reply:
Four flat trailer wiring, also called 4-pole wiring, uses four wires and pins configured as shown in the linked photo of a trailer side 4-pole connector.
The one pin that is different from the other three (on both trailer and vehicle side connectors) will be the ground pin and this usually has a WHITE wire that will ground to a clean bare metal spot the trailer frame with a ring terminal.
The next pin is for the running light circuit and this typically uses a brown wire to activate the tail lights on both sides of the trailer. The next pin is for the LEFT combined stop/turn signals and this is usually assigned to a yellow wire. Finally the 4th pin carries the same combined stop/turn signals for the right-hand lights.
On occasion a trailer can be fitted with a 4-pin plug that actually has 5 wires. This is called a wishbone harness and it uses dual running light wires connected to the one pin to simplify connections. An example is part # A20WB. This is still a 4-pole setup despite the 5th wire.
If you have only three wires on the trailer then something is missing. I suggest you trace your trailer harness to see where all wires are routed. This will help you find the 4th wire and also let you confirm which function each wire connects to. Although there are wiring conventions, such as a running light circuit using a brown wire, there is never a guarantee that all trailers will follow these conventions.
You may care to bypass all the existing wiring and install a complete lighting/wiring kit like # TL29BK or an LED version such as # TLL9RK.
If not you can use a junction box like # 3375601100 along with 4-pole bonded wire # 16-4B-1 and ring terminals # DW05702-1 and butt connectors # DW05744-10 to connect all the existing lights to a new 4-pole such as # W787264.
Products Referenced in This Question
Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Accessories and Parts
- Trailer Wiring
- Junction Box
- Buyers Products
more information >
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Standard Trailer Light Kit with 25' Wire Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Red and Amber
- Optronics
more information >
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Wesbar
more information >
Product Page this Question was Asked From
4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: ST205/75/15 Spare Wheel And Tire Combo For A 1974 Pull Behind Camper
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
- Shop: Dexstar Vintage Steel Wheel w/ +5 mm Offset - 13" x 4-1/2" Rim - 4 on 9.44 - Silver
- Shop: Standard Trailer Light Kit with 25' Wire Harness
- Shop: Dexstar Vintage Steel Wheel w/ +5 mm Offset - 15" x 5" Rim - 4 on 9.44 - Silver
- Shop: Loadstar ST205/75D15 Bias Trailer Tire - Load Range C
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Best 2011 Ford Taurus Trailer Hitch Options
- Video: Trailer Hitch Installation - 2006 Jeep Grand Cherokee - Curt
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55451 Review
- Article: Trailer Wiring Diagrams
- Search Results: 4 pole flat mounting bracket
- Search Results: hm48755
- Search Results: dielectric grease
- Search Results: mounting bracket
- Search Results: dielectric
- Shop: etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Search Results: 44649
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Lippert Solera Slider Slide-Topper Review
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
on Trailer Wiring
