Hub And Drum Replacement for 90865 Rockwell Hub and Drum
Question:
Is this the same as part # 90865? That is the number on my broken hub.
asked by: Derek O
Expert Reply:
Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles # AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum.
Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity, 8 on 6-1/2" bolt pattern and most importantly share the same bearing numbers, which are inner bearing # 25580 and outer bearing # 02475.
I have added a link to a video review of this hub and drum for you to check out as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- 25580
- 02475
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Search Results: 90865
- Q&A: Availability of Replacement for Trailer Hub/Brake Drum 92865A-1
- Search Results: akebrk~8
- Search Results: 8k drum
- Search Results: k23~532~00
- Shop: RV Exterior Lighting
- Search Results: hayes brake assembly
- Q&A: Replacement Brakes and Hub/Drum Assemblies for 8K Axles on Trailer
- Q&A: Recommended Electric Drum Brakes for 8,000 Pound Trailer Axle
- Q&A: Mounting Hole Pattern For Dexter Electric Trailer Brake Assembly # K23-532-00 & K23-533-00
- Q&A: What Size are Dexter Electric Brakes for 8,000 lb AL-KO/Hayes Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: brake actuator
- Search Results: 23~458~459
- Q&A: How Large is the Hub Bore on the Trailer Hub and Drum Assembly AKHD-655-6-K
- Q&A: How to Determine What Hub and Drums Will Fit Vintage Military Trailer
- Shop: Brake Controller
- Shop: Trailer Hitch
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Shop: Tire Chains
- Shop: Gooseneck Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring