Rear Suspension Enhancement Recommendation for 2008 Jeep Wrangler Unlimited with 4 inch Lift

Question

Question:

What kit will work with a 4 inch lift. I have a 2008 unlimited X model

asked by: Scot P

0

Expert Reply:

I have a suspension enhancement solution I can provide for your 2008 Jeep Wrangler Unlimited but the air bag style kits are not a fit with lifted vehicles.

Instead you would want the Timbren kit part # TJRJK with the lift spacers # A25723-90AH00 for each inch of lift you have.

So in your situation you would need a total of 8 for both sides.

expert reply by: Jameson C

0

Answer 1

Because the #TJRJK is a friction fit into the factory cup where the bump stop fits, a spacer wouldn't work.. If you can provide me a measurement, they might have a fit. They'll need the height difference between the underside of the frame and…

view full answer...

Answer 2

We have spacers that you can add to accommodate a 4" lift on your 2015 Jeep Wrangler Unlimited, but there are no Timbren kits available that come preset for a 4" lift. If your Wrangler Unlimited is a 4WD then I recommend going with the…

view full answer...

Answer 3

The Timbren Active Off-Road Bumpstops - Rear Suspension - 6,000 lbs #TABSTORSEQ are not designed for your 2016 Jeep Wrangler Unlimited. You will instead want the Timbren Active Off-Road Bumpstops - Rear Suspension - 2,400 lbs #TABSJRJK which are a…

view full answer...

Answer 4

The Timbren suspension kit part #TABSJRJK that you referenced would be the correct enhancement kit for your 2018 Jeep Rubicon Unlimited but since you also have a lift kit you'll need spacers: 1/2" Spacer - #TA25722-90F00 1" Spacer -…

view full answer...

Answer 5

The Timbren Active Off-Road Bumpstops #TABSJRJK referenced in your question are confirmed to fit your 2018 Jeep JL Wrangler Unlimited. These are designed to replace the factory bump stops on your Jeep and will provide a stronger unit that will do a…

view full answer...

Answer 6

Timbren rear suspension jounce spring kit #TJRJK is a confirmed fit on the 2014 Jeep Wrangler Unlimited 4WD. I went to our warehouse to measure these springs for you and found their overall end to end length is 4-1/4-inches and the diameter is…

view full answer...

Answer 7

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

view full answer...

Answer 8

The SumoSprings Custom Helper Springs #SS36EV are designed around the OEM suspension on a 2021 Ford Bronco, although they do come with two 1/2" spacers you can use if desired. If the lift kit raises the suspension on your Bronco and not just the…

view full answer...

Answer 9

There are not any additional spacers available for the SumoSprings Solo Custom Helper Springs. That said, we have heard of others using the Timbren Spacer part #A25723-90AH00 along with longer bolts with success.

view full answer...

Answer 10

The Coil SumoSprings Custom Helper Springs #CSS-1094F are a fit for the front but not the rear. Unfortunately, there are no suspension enhancement options for the rear of your 2022 Bronco since you have the Sasquatch package. To help with that rear…

view full answer...

Answer 11

The Coil SumoSprings #CSS-1094F that fit on the front axle of your 2010 Ford Expedition 4WD will not be of great benefit for you when towing. They are generally used when you have a front hitch and snow plow or something like a bull bar or grill…

view full answer...

Answer 12

The difference between Super Springs Coil Helper Spring kits #CSS-1094 and #CSS-1094R is that the CSS-1094 can be used in either front or rear coil spring applications while the other kit is for rear springs only. For your 2011 Subaru Outback with…

view full answer...