Locating Brake Light Fuse for a Brake Light Relay on a 2010 Honda Fit
Question:
Greetings -I am preparing my 2010 Honda fit to install the Roadmaster brake-lite relay RM-88400. Chris B indicated that I should look for the green/silver wire coming from the brake light relay. I am trying to find the brake light fuse to pull prior to beginning the work. The fuse box label does not have brake light switch. Would it be fuse 11, ABS/VSA or fuse 37 labeled ABS/VSR FSR? Any help you can provide would be greatly appreciated.
asked by: Joe O
Helpful Expert Reply:
Pull the fuse panel beneath the dash to attach the red power wire to the hot side of any fuse that is powered only when brake pedal is depressed. The location might be 11 or 37 but you will need to test for function using a circuit tester like # PTW2993.
See the Roadmaster video I attached of the at the 3:26 mark to show you how to test for function but the fuse panel will be different (2008 Honda Fit) as fuse panels have changed throughout the years.
I also attached a video of the circuit tester.
Products Referenced in This Question
Product Page this Question was Asked From
Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Tow Bar Braking Systems
- Brake Light Relay
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
- Video: SMI Stay-IN-Play DUO Braking System Installation - 2014 Honda CR-V
- Shop: BOLT brand vehicle and hitch locks
- Q&A: Demco Stay-IN-Play DUO Pulsing On/Off When Turn Signal Is Activated
- Q&A: Troubleshooting Pulsing Brakes With The Demco Stay-In-Play Braking System While Turn Signal Is On
- Shop: Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Shop: BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2014 Honda CR-V
- Video: Roadmaster Tow Bar Wiring Kit Installation - 2014 Honda CR-V
- Video: Roadmaster Universal Diode Wiring Kit Installation - 2014 Honda CR-V
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2012 Honda CR-V
- Shop: Cordless Circuit Tester
- Shop: Roadmaster Accessory Kit for Nighthawk and Sterling Tow Bars - Tail Light Wiring - Lock Set
- Shop: Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Shop: Roadmaster Tow Bar Cover
- Q&A: Troubleshooting 2014 Jeep Wrangler Brakes Pulsing With Motorhome Turn Signals
- Q&A: Troubleshooting Brakes Pulsing with Blinkers with Demco SBS Stay in Play System
- Q&A: 2014 Honda CR-V Flat Towing Preparation Steps
- Q&A: How to Find the Cold Side of a Brake Light Switch
- Q&A: Where Does Roadmaster Brake Lite Relay # RM-88400 Install
- Video: Roadmaster FuseMaster Fuse Bypass Switch Installation - 2014 Honda CR-V
- Article: Trailer Wiring Diagrams
- Search Results: base plates
- Shop: Base Plate for Tow Bar
- Video: Blue Ox Patriot Portable Braking System Installation - 2022 Ford F-150
- Search Results: tow bar
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: rm~88400
on Tow Bar Braking Systems
