2014 Honda CR-V Flat Towing Preparation Steps
Question:
Do I need to do anything other than put the car in neutral to flat tow it
asked by: Don W
Expert Reply:
The online owner's manual for the 2014 Honda CR-V indicates on page 235 the following procedure to prepare this vehicle for flat towing behind a motorhome:
1. Check the transmission fluid level. Make sure the fluid level is between the upper and lower marks.
2. Start the engine.
3. Depress the brake pedal. Move the shift lever through all its positions.
4. Shift to D and hold for five seconds, then to N. Let the engine run for three minutes, then turn it off.
5. Release the parking brake.
6. Leave the ignition switch in ACCESSORY. Make sure the steering wheel does not lock.
7. Turn off all the electric devices. Do not use any accessory power sockets. This can prevent the battery from running down.
Honda also states that the car should not be towed faster than 65 mph and that the transmission fluid should be changed every 2 years or every 30K miles.
I recommend checking your printed manual in case it differs from the online version.
If you need any flat towing components please let me know and I will be glad to offer recommendations.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: Replacement RF Controller for Blue Ox Patriot II or Patriot 3 Flat Tow Brake System
- Q&A: Recommended Complete Flat Tow Setup For 2012 Honda CR-V
- Video: Blue Ox Base Plate Kit Installation - 2012 Honda CR-V
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Q&A: Procedure To Follow Before Flat Towing 2013 Honda CR-V Behind A Motorhome
- Shop: Vehicle Tow Bar Brake System
- Shop: BOLT brand vehicle and hitch locks
- Video: SMI Stay-IN-Play DUO Braking System Installation - 2014 Honda CR-V
- Q&A: Troubleshooting Pulsing Brakes With The Demco Stay-In-Play Braking System While Turn Signal Is On
- Q&A: Demco Stay-IN-Play DUO Pulsing On/Off When Turn Signal Is Activated
- Shop: Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2014 Honda CR-V
- Video: Roadmaster Universal Diode Wiring Kit Installation - 2014 Honda CR-V
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2012 Honda CR-V
- Video: Roadmaster Tow Bar Wiring Kit Installation - 2014 Honda CR-V
- Q&A: Troubleshooting 2014 Jeep Wrangler Brakes Pulsing With Motorhome Turn Signals
- Q&A: Troubleshooting Brakes Pulsing with Blinkers with Demco SBS Stay in Play System
- Q&A: Installing the Roadmaster Brake-Lite Relay # RM-88400 on a 2013 Honda CR-V
- Video: Roadmaster EZ5 Base Plate Kit Installation - 2014 Honda CR-V
- Search Results: rm88400
- Search Results: base plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring