Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
(50 reviews)
Price: $25.12
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
Our Price: $25.12
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (50)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
308200 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 3045 and 3082-PItem # TK93VR
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2024 Dodge Durango with factory Tow Package
- 2011 - 2021 Jeep Grand Cherokee with factory Tow Package
- 2022 - 2022 Jeep Grand Cherokee WK - old body with factory Tow Package
- 2022 - 2024 Jeep Grand Wagoneer without factory Tow Package
- 2023 - 2024 Jeep Grand Wagoneer L without factory Tow Package
- 2017 - 2024 Chrysler Pacifica with factory Tow Package
- 2022 - 2024 Jeep Wagoneer without factory Tow Package
- 2023 - 2024 Jeep Wagoneer L without factory Tow Package
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - TK93VR
Average Customer Rating: 4.6 out of 5 stars (50 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Lauren 02/09/2024
2022 Jeep Wagoneer
My car came with a tow package but without trailer brake control and so it had a plug to connect the controller to. This plugged into that and voila. I had a place to connect the trailer brake controller. I know little to nothing about cars and was able to do it myself. 10/10 would recommend. Saved me a custom job bill.
by: Joseph 02/10/2024
its the simple way to add the brake controller. Just plug and play. No splicing and discing of the of the vehicle wiring harness.
by: Wayne03/14/2024
2021 Jeep Grand Cherokee
Easy ordering, fit perfectly on my 2021 Jeep Grand Cherokee... So much valuable info on etrailer, and very reasonable shipping to Canada !
by: Tom M06/23/2023
2023 Jeep Grand Cherokee
I recently purchased a new Jeep Grand Cherokee L with the trailer tow package. I was looking for a replacement adapter for my Tekonsha Primus IQ. This particular wiring adapter was not a guarantee fit, but after plugging it in to the harness on my new vehicle it works fine. So, based on my experience, this adapter does properly work with the tow package wiring on 2023 JGCLs.
by: Alex 01/14/2023
Great product. Easy fit. Makes installation real easy
by: Jeffrey 07/10/2022
Jeep is not making brake controllers or wiring adapters for my vehicle. Glad my RV dealer pointed me to check with Tekonsha and etrailer.
This wiring adapter will make the installation of the brake controller much easier and more reliable than splicing wires. Look on YouTube for an installation video.
Jeffrey
7/11/2023
Working as designed. Happy with its performance
by: John10/28/2023
I ordered a wiring harness for a trailer brake controller and paid for quicker delivery. I received a clear lens cover for an interior dome light. Customer Service did answer the phone and said they would try to send the right part… but the parts delay makes a trip with the trailer impossible.
by: Jose12/11/2023
Besides receiving my product damaged, and three days late, I am unclear as to why the individual who packaged my product didn’t replace the box. I hope you have a wonderful Christmas and a happy new year.
by: Chas06/17/2023
Plug and play with proper wiring harness made installation a snap. Break controller worked great on our Jeep Grand Cherokee. I highly recommend.
by: Tom 07/31/2023
2022 Jeep Wagoneer
Make sure you get the plug in wire adapter but it was already part of the purchase
by: Craig 02/13/2024
Jeep
Worked perfectly with our Jeep.
by: Tom 02/22/2024
Works great, fast delivery!
by: Jeff 10/13/2023
Jeep Grand Cherokee
Perfect fit for my grand cherokee.
by: Ricky 05/22/2023
2022 Jeep Wagoneer
Great service towards parts being processed and sent out in a timely manner.
by: Martin 01/10/2023
0 0
Plug and play as advertised. The wires are nicely protected. I mounted my brake controller under the dash, just below the ignition. I had plenty of wire.
by: Zo O03/13/2023
Reliable, works as advertised.
by: Mike09/18/2022
Great experience, easy installation. Shipping to canada right now was a 3 week ordeal but overall that is the only drawback. Yes, I would buy from etrailer again.
by: Jeremy 07/28/2022
Worked great to hook up my brake contro ller.
by: Patrick 07/30/2022
Plug and play in my 2022 Wagoneer
by: Mark06/08/2022
2018 Jeep Grand Cherokee
Plug and play
by: John09/27/2022
Easy install
by: Michael 10/05/2022
Fast delivery and this made install eas y.
by: Steve02/10/2024
by: Norm 06/06/2023
25
50
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Can Pilot Brake Controller Install in 2020 Chrysler Pacifica with Factory 7-WayYes the Pilot brake controller part # 80550 will fit your 2020 Chrylser Pacifica with a factory 7-way with the install harness part # TK93VR. All you'd need is the install harness and the brake controller and you'd be set.
view full answer... - Tekonsha Brake Controller Wiring Adapter For 2021 Jeep Grand CherokeeSure do! According to my friend in the Tech Services department at Tekonsha, their # TK93VR brake controller wiring harness is compatible with the 2021 Jeep Grand Cherokee. The connector that the harness plugs into is located near the top of the e-brake pedal. I've linked to an install video that should help you locate the connector.
view full answer... - Installing a Tekonsha P3 on a 2017 Chrysler Pacifica With Factory Tow PackageHaving the factory tow package on your 2017 Chrysler Pacifica will definitely make installing the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 significantly easier. The Tekonsha Plug-In Wiring Adapter # TK93VR will plug directly into a port under your dash and will make your install quite a bit quicker.
view full answer... - Recommended Brake Controller for a 2019 Jeep Grand Cherokee With Factory Tow PackageFrom what I could find, the 2019 Jeep Grand Cherokee did not come with a factory brake controller. However, you do have a factory port for an aftermarket controller to plug directly in to. The Tekonsha Primus IQ # TK90160 paired with the plug and play harness # TK93VR will be the ones I suggest. This is a very easy controller to set up and use, and can handle trailers with up to 3 axles that have brakes. The harness will also plug directly into a port under the dash. I included a video...
view full answer... - Will Tekonsha Brake Controller Adapter # TK93VR Fit 2014 Jeep Grand CherokeeThe Tekonsha Plug-In Wiring Adapter, part # TK93VR is a confirmed fir for your 2014 Jeep Grand Cherokee, if you have the factory 7-way connector on the rear of your Jeep. Here is a list of the compatible brake controllers for the # TK93VR. Compatible time-delayed brake controller: Tekonsha PowerTrac (# 39523) Compatible proportional brake controllers: Tekonsha P2 (# 90885), Tekonsha P3 (# 90195), Tekonsha Primus IQ (# TK90160) and Tekonsha Voyager (# 39510). I have attached a link to...
view full answer... - 2015 Jeep Grand Cherokee 4×4 Brake Controller and Weight Distribution RecommendationSorry to hear about the problems you had so far, but we definitely can help. To install a brake controller in your 2015 Jeep Grand Cherokee that now has a factory 7-way installed will only require the correct brake controller install harness. For example if you installed our Prodigy P2 # 90885 which is basically the best controller available all you would need is the install harness part # TK93VR to install it. When Jeep installed the factory 7-way on your vehicle they would have completed...
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty Brake Controller on 2021 Jeep Grand CherokeeIf your Grand Cherokee has the factory 7-way at the back bumper, it'll be prewired for a brake controller. You'll need the # TK93VR wiring harness and the # 331-TPH-017 adapter. The # TK93VR harness will plug into the factory connector located under the dash to the left of the steering column, above where the driver's left knee would be. The # 331-TPH-017 adapter plugs into the harness, the other end plugs into the controller. If your Grand Cherokee does NOT have the factory 7-way, you'll...
view full answer... - Parts Needed to Install Tekonsha Primus IQ Brake Controller on a 2020 Jeep Grand CherokeeThe Tekonsha Primus IQ Trailer Brake Controller TK90160 can definitely be installed on your 2020 Jeep Grand Cherokee, you just need the following wiring parts depending on if you have the factory tow package or not: With Factory Tow Package - Plug-In Wiring Adapter # TK93VR Without Factory Tow Package - Curt 4-Way Wiring Kit # C62VR - Universal Installation Kit # ETBC7 - No-Drill Mount Bracket # 18136 If you have the factory tow package you'll have a connector located underneath...
view full answer... - Where is the Brake Controller Port on a 2015 Jeep Grand CherokeeThe picture you attached is the OBDII port and will not connect with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR. The port that you will need to find will match the grey connector on the adapter harness. If you take a look at the 3:00 mark in the attached review video, the location of the plug you will need to access will be shown.
view full answer...
- Brake Controller Recommendation for 2018 Jeep Grand CherokeeFor your 2018 Jeep Grand Cherokee with a factory 7-way I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well. Then to...
view full answer... - Connecting Draw-Tite Trailer Brake Controller to a 2022 Jeep Grand Cherokee WKThe Tekonsha 3045-P has been replaced with the Tekonsha Plug-In Wiring Adapter # TK93VR (3082-P). This will allow you to use your Draw-Tite 5535 brake controller on the 2022 Jeep Grand Cherokee WK(old body style). If you have the new body style (WL) a connector has not yet been created. You will not have to have your computer programmed to use the controller. Programming is only needed if connecting a factory controller on your Jeep.
view full answer... - Custom Brake Controller Wiring Harness for 2019 Jeep Grand Cherokee and Installation LocationFor your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3 # 90195 then you will use # TK93VR for your wiring harness. If you are using a Curt controller like # C74VV you will use harness # C51446. Finally if you are using a controller like the RedArc Tow Pro Elite # RED44FR, then you will use the pigtail...
view full answer...
- Trailer Connector Recommendation and Install on 2020 Jeep Grand CherokeeSince your Grand Cherokee has the US car connector under and behind the rear bumper (see photo), you'll just need part # C55774 which installs as shown in the video I've linked. This connector provides both the 4-pole and the 7-way trailer connector. According to Curt, in some instances the vehicle's computer will need to be flashed at the dealership in order to fully activate the tow package. If your trailer has electric brakes and you want them to actuate you'll need a brake controller...
view full answer...
- Tekonsha Prodigy P3 and Wiring Adapter for a 2023 Dodge DurangoThe good news is that Tekonsha does have a plug in wiring adapter for their P3 brake controller # 90195 that will work with your 2023 Dodge Durango, # TK93VR. This adapter will let you easily add this brake controller to your vehicle without having to dive into your vehicle's wiring. You'll just need to pick a nice spot to mount the brake controller, connect the adapter to the unit and then from the unit to the junction box located underneath your dash.
view full answer... - Recommended Parts For Towing a Trailer With Electric Brakes, With a 2014 Jeep Grand Cherokee DieselI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75713 for your 2014 Jeep Grand Cherokee. Currently there is not an aftermarket receiver that is integrated into the bumper of your Cherokee. For the wiring there are 2 routes that can be used and are determined by if your Cherokee came with the factory trailer wiring. You can determine this by contacting your local Jeep dealer with your VIN to see in the option was included on your Cherokee. If you have the factory trailer...
view full answer... - Parts Needed to Add a Brake Controller on a 2013 Jeep Grand Cherokee With or Without the Tow PackageSince you don't have the trailer towing package on your 2013 Jeep Grand Cherokee you do need to start off by installing a 4-Way connector. I recommend the Tekonsha T-One # 118425 as we have found Tekonsha to be one of the most reliable wiring companies that we carry. To have 7-Way and 4-Way connectors on your Jeep you also need the Universal Wiring Kit # ETBC7. This connects to the T-One and give you both connections that you need. It also includes everything you need for the 7-Way to...
view full answer...
- How to Install a Brake Controller on a 2001 Jeep Cherokee Without Factory 7-Way Trailer WiringThe best option on Jeep vehicles without a factory 7-way is to use the # ETBC7 brake controller installation kit that you purchased, see instructions link. The 2001 Jeep Grand Cherokee without tow package may have the connector under the dash from the factory, but, if present, it most likely is not fully functional. In addition there was no 7-Way at the rear of the vehicle so the blue wire from the harness is terminated somewhere in the factory wiring harness. We do not recommend digging...
view full answer... - Question About a ProductYes, it is. Since you have the factory tow package in your 2023 Dodge Durango, the Tekonsha Plug-In Wiring Adapter item # TK93VR will allow you to have a plug in play installation for any Tekonsha Brake Controller like the P3 item # 90195.
view full answer... - Brake Controller Wiring Adapter for 2013 Dodge Durango with Factory 7-WayFor your 2013 Dodge Durango with factory 7-way the correct brake controller wiring adapter for a Draw-Tite, Tekonsha or Dexter brake controller is part # TK93VR. Part # 3021-P is for Ram trucks.
view full answer... - Parts Needed To Install Tekonsha Prodigy P2 Trailer Brake Controller in 2023 Jeep Grand WagoneerThe Plug-In Wiring Adapter # TK93VR will allow you to connect your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 to your 2023 Jeep Grand Wagoneer. We do have the Replacement Mounts # 7686 & # P7685 should you decide to leave the mounting bracket in your Escalade or they become lost or damaged. The electrical connection for the controller can be hard to find under the dash. I have included a installation video we did for the P3 # 90195 near the bottom of the page you can watch to...
view full answer... - Best Trailer Brake Controller for a 2022 Jeep Wagoneer Series IIIThe best brake controller option for a 2022 Jeep Wagoneer really comes down to how much you'll be towing. If you are taking out a camper a few times a month then the best option is a wireless controller like the Curt Echo Wireless Brake Controller part # C51180 since it doesn't require any drilling into the dash taking up your legroom. If you will be towing more frequently then I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 which can be installed without splicing...
view full answer... - 2022 Jeep Wagoneer Brake Controller RecommendationWe definitely have some options for you but you'll have to do some checking on your end since the 2022 Jeep Wagoneer is currently a brand new model that doesn't have a lot of information out on it yet. From what I could find it looks like your Wagoneer will either come with a 4-Way socket or a 7-Way socket. I believe that both options mean you have the factory tow package so we can connect to the plug under the driver's side dash of your vehicle but for the 4-Way we need to add some wiring...
view full answer... - Parts Needed For Adding A Reese Trailer Brake Controller To a 1999 Jeep Grand CherokeeYou will need the Replacement Brake Control Plug-In Harness # 20127 and Wiring Kit # 5506 to be able to connect your Reese Towpower brake controller to your 1999 Jeep Grand Cherokee with a factory 7-way. The Plug and Play harnesses like # TK93VR did not fit the Jeep Grand Cherokee until the 2011 model year. If you do not want to have to run the additional wiring and already have a 7-way the Curt Echo # C51180 will allow you to control the trailer brakes from your smartphone using the...
view full answer... - Installation of Brake Controller on a 2009 Jeep Grand CherokeeThe Tekonsha Brake Control Adapter, part # TK93VR is for 2011 and newer Jeep Grand Cherokee with a factory 7-Way. It will not work on your 2009 Jeep Grand Cherokee. The 2009 Jeep Grand Cherokee is not pre-wired with a brake controller port for installation of a brake controller. To install a brake controller on your 2009 Jeep Grand Cherokee with a factory 7-Way you will need to do a little hard wiring. I spoke with my contact at Tekonsha and he stated that the only wire Jeep provides...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Sabrina W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alex M.
1/15/2024
This is a great product, easy to use. The adapter specifically for my vehicle made it all easy to use and easy to install. Highly recommended. The dual trailer option is very handy.