Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your 's dashboard.
Features:
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (1010 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.I am by no means mechanically inclined but the ease of connecting adapter on one end and the other end into the unit was way easy on my 2017 Nissan Titan. Probably no longer than 30 minutes to install.
I purchased the 3050-P quick connect wire harness for the ease of installation.
My 2008 Nissan Titan has the big tow package and I needed an electric brake system.
All I had to do was remove two phillips head screws and the lower dash panel pulls off. Locate the factory brake harness which is taped up at the emergency brake and attach the two together. I routed the harness to the right side of the lower dash because I'm right handed but, there is enough wire to move it to other areas within reason.
I also purchased the pod Pro Series 80500 which serves 1 or 2 axel brake systems. I mounted it to my lower dash on the right side within reach and it plugs right into the wire harness.
I have not had chance to use the new system yet but, am confident that etrailer has sold me a system that will work for me.
Tekonsha Prodigy P2 Trailer Brake Controller And wiring harness purchased to pull 20’ enclosed trailer on my Infiniti QX 80. Installation was easy and correct the first time. Controller works great. Thank you etrailer
Excellent quality of materials, fit perfectly fine on our 2018 Infiniti QX-60. Just make sure to take the cap off from the break connector in order to fit the plug and play wire harness. Cap is attached.
Thanks,
Alex S.
8/8/2020
The product has been working flawless.
It was easy to use this short wiring harness to connect a Tekonsha Prodigy P3 brake controller to the factory installed under-dash connector on our new 2015 Xterra. ALL 2015 Xterras have that under-dash connector, regardless of trim level or model. Previous years may also, just look for the white 6-conductor connector that is taped to a wire bundle under the dash above the right side of the driver footwell (see my photo). The cable was just the right length to make the connection to the brake controller mounted to the plastic panel just up from the hood release tab (see the other photo). Because the brackets supplied with the controller would have placed the controller about an inch from the dash surface, creating a knee-banger situation, I instead use some industrial quality 3M dual-lock fastener (like velcro on steroids) to mount the controller. The controller is securely mounted right up against the dash panel, but is still is removable, if needed.
If you also need a rear 7-way connector harness and the relays that all plug into the factory installed connectors, I highly recommend #118266. It provides everything you will need except for the bracket to mount the 7-way connector to the bottom lip of the rear bumper, see #TM76474.
I received the Prodigy 3 brake controller very quick. It was a plug and play. Installation was completed in less than 30 minutes. Etrailer are the best.
Fast delivery and the product was as easy to install as shown in the installation videos on your website.
Product was correct,fit,on time and simple to install. All the above are very uncommon these days. First time I have used etrailer won't be the last.Thanks.
Don
1/11/2024
Still works great.
I am still very much satisfied with my Tekonsha brake system and harness. It has continued to work flawlessly and has prevented an accident on more than one occasion. I’m glad I spent the little bit extra considering the ease of installation and continued reliability!
Janet was very helpful in answering my questions and helping me select the correct trailer brake controler for my 2007 Nissan Frontier. Didn't need to cut and crimp wires, it was all plug and play. I needed it ASAP and got it in two days. It's good to have customer service in the U.S. and not have to struggle with foreign accents. Thanks etrailer!
Walter
3/6/2023
The controller and cable are still working well, no problems.
Simple plug and play with my 2006 Nissan Titan, and etrailer staff was extremely helpful
Andrew
11/16/2022
Still works like new! I tow a car hauler very often, and this controller and harness has held up as expected.
Andrew
11/28/2023
Still working good :
I purchased this along with the brake controller for my 2017 Nissan Frontier. Very easy to install and has been working flawless for me.
I had a little difficulty making sure that this was the correct adapter for my 2017 Nissan Armada, but it is. They are the same connector as 2015.
I also had trouble locating the factory pre-wiring and tgere was nothing in my Nissan owners manual that I could find. If you have a 2017 Armada the pre-wiring is on the right side of the steering column, above the accelerator (see pic). From what I understand, on the previous generation vehicles, the pre-wiring was on the left side near the e-brake.
As far as the product itself, it works, fit properly, and the wiring is solid.
I have had only one opportunity to test the Tekonsha brake controller, but I was very pleased with its performance. I won't say installation was easy, but got it done in a reasonable amount of time. Watching other how-to videos really helped.
Seems it was tailor-made for our Frontier. The ease of installation is only surpassed by a leading name in brake controllers.
Received item before expected date. Fit perfectly in my 2014 Nissan Frontier.
I ordered this with the # 90195 Tekonsha P3 Trailer Brake Controller. This adaptor is perfect, no cutting into wires or using wire taps, just plug and play, that's the way I like doing things looks more like factory install. worked out great for me on my Nissan 2017 Titan. way to go
The trailer brake was so simple to hook up and works amazing
Tim L.
9/2/2015
After one year of using this controller I would never go back to any other brake controller
The brake control harness I purchased from etrailer was exactly what I need and was very easy to install; especially with their product video showing step-by-step installation process. The harness works great with my Tekonsha Primus IQ brake control for my 2011 Nissan Frontier. Great product, great process and delivery came in less than a week.
Installed in 2013 Frontier Kingcab with 7-wire Nissan factory harness. With the Tekonsha wiring adapter it simply plugged-in, cable-tied to the under-dash wiring and was done. Rather than drill the dash for the mount, the mounting bracket was velcro'ed (adhesive backed) to the flat area between the seats (slightly under the dash). See attached picture. Appears to be functioning well with no issues.
As always, another Smooth & Fast Transaction…. Never had a problem with Etrailet!
This one worked great. I had previously bought one from another online retailer (exact same part) and for some reason it would not hold the connection with the electric brake controller. It would lose power, basically turn off when on the road. A call to Tekonsha was no help what so ever!
I traded in my Ford E350 for a new 2017 Nissan 3500 NV and realized that I no longer had a break controller for my van. The dealer didn't have any in stock and didn't offer installs so after a brief search on etrailers I found the right product, which even included the easy to use cable harness connector and I was able to install my new break controller in about 30 mins!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill G.
6/4/2018
works perfectly