Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4" x 1-1/2" Rectangle. LED trailer light functions as a clearance or side marker light. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (226 Customer Reviews)
4" x 1-1/2" Rectangle. LED trailer light functions as a clearance or side marker light. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
I really do not care for these - they are much dimmer than the lights I replaced. They also require modifications so that the vehicle does not complain about the wiring.
Lights are nice, but I wasn’t thrilled that 14 lights worth over $xxx were just thrown in a box loose & shipped!
The cover almost fit perfectly.
Well built. Held up well to a harsh winter. A surprising find was that it keeps our fifth wheel dust free on the inside as well as the outside.
well worth the expense.
This is a perfect replacement for the globrite 118a/117r clearance light. Same size, same mounting holes, same look. 6 diodes. Easy install. Great service.
Very happy with the gentleman that took care of me and took his time
The order arrived complete. I installed the lights, everything fit perfectly and worked.
These led marker lights lined up perfectly for my motor home and are nice and bright. I would recommend not having the lens installed on the body when shipped. Taking apart the light per the video left mars from my screwdriver no matter how careful I was, they are extremely tight.
I bought this a year ago to replace a burnt out running board light from another company that no longer makes them. Still working great.
Rob
11/10/2022
Its still working great after a year. I may be ordering more to replace the older leds which are starting to fail.
Looks just like the original
Boyd
7/13/2023
Working great. Just like the factory only cheaper.
etrailer is my go to place for trailer parts. They do everything right. This light works great and is just what I was expecting. There was one minor problem. This light was the updated LED version of the 8 year old lights that came on my trailer. The lenses were even interchangeable after 8 years.This version has no room for the wires behind the surface mounted light and require a hole through the trailer body exactly where the wires exit the back of the light. This required hole is in a different place than the old lights and required drilling a new hole in the trailer. No big deal, but having enough room to house the wire in the back of the light would be more user friendly.
David B.
1/27/2015
I am facing the same issue on my 1983 Aljo Aly. If the backplate was molded to provide enough of a stand-off to accommodate a wire nut it would be perfect! Another option would be a rubber gasket thick enough to accomplish the same thing plus seal the back of the light.
These lights from Optronics are an exact replacement for my enclosed car trailer and were an easy install. The lights are built well, illuminate brightly and priced right.
Very happy with these lights and Etrailer !!!!
Thomas
9/29/2020
The lights are still working very well, just as they were new !!
Worked out well and has held up.
Still working great, have had no proble m.
These are perfect replacements for the clearance lights on our RV trailer. They are bright, match to old footprint perfectly, and look even nicer. Every light works.
Brad B.
2/5/2018
My comments still stand. I am happy with the purchases.
I brought this as a replacement for a good bride 126R/126Y on my drivers side run board. It's a great replacement. At a distance, you can't tell.
The light pattern is slightly different, but this light was a better deal than replacing 5 other lights. I happy with it
Rob
8/2/2020
Still great
Yolanda was very patient with my sketchy description of the lights I needed replaced bu was able to find great LED replacements that look and shine brightly. This is the site to start with when needing lighting for your projects,
ordered 2 lights and both broke. Cheap plastic. There is no place for the wire to go except against the trailer frame and when you tighten the cheap plastic falls apart and pulls the screw out. Had to use an epoxy to repair both.
Anonymous
5/28/2013
You have to drill a hole for the wires. These lights a called surface mount for a reason.
Order was quickly processed and arrived in quality time. Part was as described and with little altering it worked to my expectations. I had to drill a small hole near the center of the light so it would lay flat against the fiberglass on my 40 foot 5th wheel. E-Trailer was the only site that I could find a light of that size to match the TMC GLO BRITE 126Y light on my RV. Only difference was the number and arrangement of diodes. Light replaced had 3 diodes in a line and MCL44AB has 6 arranged in the center of the light. Light works great but design needs to be altered so that wire can be directed towards the center.
I have been dealing with etrailer for many years now and have always been very satisfied with the products, pricing, service and fast delivery.
These were replacement lights from the original equipment. They have worked well and are much brighter than the original.
Larry H.
1/19/2018
The ones I have installed continue to work as expected and without problems.
The trailer marker lamps worked great. The trailer looks like a Christmas tree when it is running down the road. The best part was being able to run all the lights off one circuit. LEDs rule.
Exactly as ordered and arrived early.
Used these to replace the front marker lights on my Lance trailer. They are actually a perfect match for the lights that came on the trailer and were an easy install and much brighter. There is an extra hole in the base plate of the light that I drilled out and ran the wires through instead of their original hole which made it so I didn't have to drill a new hole in the trailer. As always fast shipping with etrailer.
A much needed upgrade to my trailer. Much brighter & waterproof.
Michael
4/16/2022
My clearance lights are now no problem at all. Just plug in and ready to go.
Led trailer lights fit perfect, easy to install and arrived in a couple of days.
Lights are clear and bright and have had no issues since installed.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
11/1/2021
Sorry to hear about this. Customer Service will contact you.