Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Amber Lens
(324 reviews)
Price: $9.94
In Stock
Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Amber Lens
Item # MCL63AB
Retail:$10.99
Our Price: $9.94
You Save: 10%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (324)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL63AB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 4L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
4-1/16" x 1-1/4". Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount with bracket (not included). Accepts 1- or 2-prong plug. P2 rated.
Features:
- LED trailer light functions as a clearance light or side marker light when properly mounted
- Thinline Series has a low profile so that light can fit in tight spaces
- Sonically sealed, waterproof housing and lens unit is submersible
- Miro-flex faceted reflector provides increased light output with a contemporary appearance
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Amber lens over white LEDs
- Compatible with 12V DC systems
- Surface mount on trailer with bracket (A65B - sold separately)
- Accepts industry standard 1-prong or 2-prong plug
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4-1/16" long x 1-1/4" tall x 1-1/8" thick
- Distance between mounting holes (center on center): 3"
- Diodes: 4
- Power draw at 12.8V: 0.051 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL63AB Optronics Miro-Flex Thinline LED Clearance or Side Marker Trailer Light - Sumbersible - 4 Diodes - Rectangle - Amber Lens - P2 Rated
Alternate part number: MCL-63AB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Amber Lens - MCL63AB
Average Customer Rating: 4.8 out of 5 stars (324 Customer Reviews)
4-1/16" x 1-1/4". Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount with bracket (not included). Accepts 1- or 2-prong plug. P2 rated.by: Andrew01/24/2024
Quality product that fit my needs nicely. Easy install and no problems. Used them for side markers on my motorcycle.
by: Donald09/12/2023
Already stopped working
by: Jason C03/16/2020
Took great and were a perfect fit. Replaced all the marker lights on my 1998 Alaskan with the amber and red. Don’t forget to get the mounting bracket.
by: Timothy 02/08/2024
Awesome. Fit perfect to replace the old iridescent ones.
by: Richard 06/15/2023
Beautiful lights. Clear, easy to install, fast service.
Now I need to order some roof lights
by: Dan W.09/24/2017
Lights were exactly what I needed to lower the total draw from the 15 running lights on my trailer that kept blowing out the fuse on my Honda Pilot. And they are brighter than the old style. Easy to install - just pops right in. Thanks
by: Cody01/23/2023
These are exactly what I needed. Installed them the day I received them in the mail.
by: Leo06/03/2019
Awesome product at an excellent price I would definitely recommend these for anyone who has a trailer
by: Michael05/11/2020
Great products looks good on Trailor.
Michael
5/12/2021
Just fine
by: Bob 02/22/2023
I purchased this to have as a spare for the ones that are on my trailer. They are exactly like the ones I have and fit perfectly.
by: Cameron 08/19/2023
Works as it should.
by: Richard King12/28/2021
I replaced all of the lights on my trailer with LED lights. I wanted to be very visible at night for safety reasons, etrailer helped me out with this. I put a dab of die-electric grease on the contacts as I did this. My trailer is extremely visible at night, now.
by: Ann05/07/2020
Nice lights- they plugged right into the existing light sockets and are much brighter. They seem to be holding up well against wet and snowy weather.
Ann A.
5/8/2021
A year later and the lights are still nice and bright.
by: LED base plate06/16/2019
Perfect replacement for my 2004 OEM lights. I converted the in closed trailer to LED. It’s been around a year and everything is just fine. Remember, quality first price second. [base plate A65PB, LED yellow AL91AB, LED red AL91RB]
by: Tim04/10/2023
I would have given 5 stars, but I initially got the wrong part and had to get that straightened out.
by: Debby09/24/2022
Your prices are good, your selection great, super fast shipping (@ a great rate) I appreciate the follow up emails and tracking information!
You are awesome
by: Ted09/19/2020
My new lights and harness were easy to attain understand and install. It came with everything I needed to rewire and install new lights in out and around my entire trailer.
by: Mike F06/16/2017
Not what I expected. Lights were not complete. No mounting bases or wire leads. Just two plugs in that plug into nothing. With no instructions, Useless for a new trailer build .
by: John L.04/20/2020
THIS is my choice for enclosed trailer clearance lamps . Nice ass’y when used with corresponding mounting base . Same for the RED .
by: Gary B.11/30/2018
Replaced Sealed incandescent lights with LEDs. Couldn’t be happier. Lights are much brighter and have lasted or year so far having been dipped in salt water frequently.
by: Steve S.05/10/2013
All lights worked as expected. Not only are these LED type brighter than the original incandescent lights, the Optronics Miro-Flex type product looks great even when they are not lit.
by: Lane 05/05/2023
Good service
by: Ted08/15/2018
I have not assembled the trailer yet, but the quality of the parts
is good, delivery was quick and the price was great due to the
free shipping. So far my favorite place to buy trailer parts.
by: Danny03/16/2018
I have replaced all my lights and wiring on my boat trailer! I love the quality of the lights that I have bought!
by: Jim F10/01/2017
Mounted onto A66PB bases lights are very bright. Used to replace old reflector none submersible lights on boat trailer..Excellent upgrade
25
268
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement Clearance Light for 1997 Champion Bass BoatThe Miro-Flex Thinline LED Trailer Clearance or Side Marker Light # MCL63AB that you referenced will work great as a replacement for the clearance light on your trailer frame currently. For a mounting bracket that includes the wiring you'd want the part # A65PB and you'd be set.
view full answer... - Is a Base Required for Mounting the # MCL63AB and # MCL75AB Trailer Side Marker LightsYes, a mounting base is necessary for the # MCL63AB, you will need to use either the Black Bracket and Single Wire Plug, item # A65PB, or the Chrome Bracket and Single Wire Plug, item # A67CB with this light. The # MCL75AB, Thin Line Trailer lights also require a mounting base. Brackets for the # MCL75AB include the # A65PB and the # A67CB bases, mentioned for the # MCL63AB light.
view full answer... - Installing Optronics LED Trailer Marker # MCL63AB on TrailerIn order to install the Optronics Sealed Micro-Flex Thin Line LED Trailer Marker # MCL63AB on your trailer, you will need to add a bracket and wire harness, such as the Black Bracket with Single Wire # A65PB or the Gray Bracket and Single Wire Plug # A66PB. The choice between the two brackets is simply based on color preference, as they will wire and install the same way. The bracket will ground through its hardware, so it just needs a single wire to power the light. You will want to...
view full answer... - How to Pick Out Trailer Hubs for Older Dilly TrailerIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. I wish there was a way to find out what you need based solely on trailer info that you gave, but that's not something that's readily available. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will...
view full answer...
- Replacing 5th Wheel LED Marker Light Not WorkingThe Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Submersible - 4 Diodes - Amber Lens # MCL63AB can't have the inside replaced. You would need to replace the entire LED light. Before replacing the light, you want to make sure you don't have a wiring issue. You can test the light with a 12v battery, or you can test the wires using a circuit tester like # PTW2993.
view full answer... - Is the Optronics Micro-Flex LED Clearance Light Both a Light and ReflectorMy contact at Optronics confirmed that the # MCL63AB Sealed Micro-Flex Light is only a clearance light and not also a reflector. The reflective geometric design in the lens is to help to increase the light output of the LED. It will not really reflect much light that will happen to shine at the lens.
view full answer... - Chrome Base Recommendation for the Optronics Clearance Light # MCL63ABYes, the Chrome Bracket and Single Wire Plug # A67CB that you referenced is the correct base for the # MCL63AB and # MCL63RB that you plan on getting. The reason this bracket uses a single wire is because the light will ground through the mounting hardware. If you needed to run a second ground wire to the assembly you would only need to run the stripped ground wire around the mounting screw that attaches to the side of the base with the ground strap. See picture I attached to see which...
view full answer...
- Troubleshooting a Trailer Side Marker LightThere could be a few things that might be cause your malfunctioning rear sider marker light. You will have to examine a few thighs to determine that issue. Most light today a sealed units that will have to be replaced in full instead of replacing a bulb. First, you will need to remove the light assembly from the side of the trailer and inspect the wire connections. Some of the light will have a removable plug that connects to the back of the light housing. if you have this, then make sure...
view full answer... - What is Difference between Miro Flex and Thin Line Optronics Clearance LightsThe Miro-Flex part # MCL63AB and the Thin Line part # MCL75AB are both very similar. They essentially are just visual differences for the lens. The Miro Flex has more of a Euro style look where you can see the diodes and the reflective base in the light whereas the Thin Line has the diodes obscured. Both would work well and I would recommend you pick which you like the appearance of more.
view full answer... - Does Sealed, Miro-Flex, Thin Line, LED Trailer Marker Light # MCL63AB have 2 Prongs in the BackSealed, Miro-Flex, Thin Line, LED Trailer Marker Light # MCL63AB does indeed have the 2 prongs at the center on the back of the light. I have included a picture showing this for you.
view full answer...
- Replacement Side Marker Light for 2015 Dynamax Dynaquest RVIn order to find a replacement side marker light for your 2015 Dynamax Dynaquest I recommend taking some measurements of the current light. There is not a direct replacement available so you will need to find something that is a close match and ideally uses the same mounting hole dimensions. The Miro-Flex Thinline LED Trailer Clearance or Side Marker Light # MCL63AB you looked at uses the same 2 prong plug you have now and measures 4-1/16" long x 1-1/4" tall x 1-1/8" thick. The distance...
view full answer...
- Will the Optrinics A68PB Bracket Work With the MCL63AB Lights?The Optronics # A68PB will definitely replace your damaged bracket. Your # MCL63AB lights will have no issues snapping right into this and you will be good to go.
view full answer...
- Will Thin Line Clearance Light # MCL63AB Work with a Mounting Bracket # A67CB on Aluminum TrailerYes, the Chrome Mounting Bracket # A67CB that you referenced will work on your aluminum trailer with the Clearance Light # MCL63AB, but since you have an aluminum trailer and the bracket grounds through the mounting hardware you will also need a Two Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A68P.
view full answer... - Replacing Side Marker Brackets And Bulbs On 2010 Pace Journey TrailerThe Chrome Bracket and Single Wire Plug # A67CB has just enough room to route the wire that it comes with. Based on the photo you attached, it looks like the hole that is already drilled is in the exact spot for the wire on the new bracket to fit into (see attached photo). You may need to cut some of the wire off or push the wire back through the hole after making your connection so that the bracket does not have to fit over a lot of crinkled wires, which obviously wouldn't allow for proper...
view full answer...
- Do I Have to Replace the Wedge Lights on my Boat Trailer with Wedge Lights for LED UpgradeWhen replacing trailer lights (with or without LED) you don't necessarily have to get the exact same light or even light style. Most people like to keep the same style and size so that they don't have to mess with repainting or making sure that everything lines up correctly. If your current light has the same dimensions of the Peterson Sealed Wedge-Type Clearance Marker w/Reflex # M116A then the Optronics Sealed, Miro-Flex, Thin Line, LED Trailer Marker # MCL63AB has slightly different...
view full answer...
- Recommended White LED Utility Light Similar to Optronics # MCL63AB The closest option we have available to the Optronics Micro-Flex Thinline LED Clearance Light # MCL63AB that uses a white lens is with the Optronics Thinline LED # UCL65CB. This waterproof rectangular LED light has overall dimensions of 4 inches long, 1-1/4 inches wide, and 1 inch deep. Its 6 LED diodes should give you a much brighter and longer lasting unit compared to your existing incandescent models. This will work great to light up your entry steps and sewage connections. I have...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Written by:
Tyler C
Video Edited:
Patrick B
Video Edited:
Jacob T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Brian T
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
9/18/2023
Well that is not good to hear at all. Luckily this item has a lifetime limited warranty on all LEDs. Let me get you over to customer service for them to help you with troubleshooting and a possible warranty.