LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
(360 reviews)
Price: $6.18
In Stock
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
Item # MCL32RB
Retail:$17.57
Our Price: $6.18
You Save: 65%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (360)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL32RB
- Clearance Lights
- Rectangle
- LED Light
- Red
- 4L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
- LED trailer light functions as a clearance or side marker light when properly mounted
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable white ABS housing and acrylic lens
- Red lens over white LEDs
- Compatible with 12V DC systems
- Surface mount to trailer - hardware not included
- 2-Wire pigtail with power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 2" tall x 1" deep
- Distance between mounting holes (center on center): 3"
- Diodes: 3
- Power draw at 12.8V: 0.06 amps
- Lifetime warranty on LEDs
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL32RB Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens - P2 Rated
Alternate part number: MCL-32RB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens - MCL32RB
Average Customer Rating: 4.8 out of 5 stars (360 Customer Reviews)
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.by: Jim 01/14/2023
I bought this to replace a broken original marker light on our 1995 motorhome.
Pros - LED, sleeker look than original, easy to wire if you are familiar with wiring lights for vehicles/trailers, priced better than incandescent.
Cons - The screw holes are closer together than my original fixture but I drilled a new pilot hole for the second screw and it was fine, the light sticks out further than the original, and I don’t like squatting or kneeling in order to fix things, anymore (but that’s just a reflection on me and not the light).
by: Jason03/30/2023
I would mark 5 stars for the products themselves but I've reduced to 4 simply because of the packaging. I ordered clearance lights and they were all thrown into a padded shipping bag with no individual packaging. After being tossed around through the mail, several of the light casings arrived scuffed and scratched. I would recommend shipping at least separates the products before mailing a bulk package. Otherwise, the products themselves seem to be as advertised.
Jenny N.
3/31/2023
Hey I do appreciate you letting us know. I will have our Customer Service team reach our and will also make our shipping department aware of it.
by: Bill 03/08/2024
The led lights are still working. The problematic fuse in the car has not blown so switching from incandescent to led has been worth the cost.
by: Craig 02/22/2024
Have had these for 1 year and still work great, good brightness and lens is holding color well. wish i would of noticed these have 3 leds vs 1 from the other brand i would of bought these for all my lights. great product
by: Arnie08/14/2018
Replaced burned out incandescent clearance light with LED. Been doing that with all my incandescent lights as they fail. Worked great and fantastic price. Wiring info on the etrailer web site also helpful. This was the closest match to the originals.
by: David03/20/2024
They worked great . Shipped and received in good order and on time .
by: Rhex05/09/2024
I replaced all the incandescent running lights on my RV with these LED versions last year. The installation went as expected and they new lights are brighter and operated perfectly all season long. The information provided by etrailer online was exactly what was needed to make the proper selection and the service was exemplary as always. Thank you etrailer!
by: Joseph 12/12/2022
Very nice light and reasonably priced.If you use gaskets order them. Emailer is a great company and very efficient.
Joseph
12/13/2023
100 fine
by: Andre09/22/2022
I am sure the product is of average quality, however when you purchase multiple items from etrailer (some of substantial weight) and they box everything together without any packing materials to keep fragile items safe, the comfort and likeness of purchasing items through this retailer drops. Brought this up with their customer service, and they said it was packed properly.
by: Pathfinder Brad05/21/2024
worked great to replace my Dynamax RV clearance light. Easy to find on the website and a fair price. etrailer is a great resource for trailer and camper owners.
by: Chuck01/25/2022
Well, they are just lights – amber and red. But, I upgraded all my trailer lights to LED’s, and these continue to look and function great.
by: Kelle05/25/2024
Works perfectly!
by: Gregory09/16/2020
This is my second order of these lights. The first order was a test to see if I like the way they look to replace my old cracked and dirty incandescent lights. Once I put the new lights on my trailer, I knew I had to replace all of my lights because they look so great! They make my old 1999 Jayco look like new!
by: Jay04/29/2024
Fast and efficient service! Definitely recommend
by: John 02/11/2024
Great service, good product, excellent delivery.
by: 04/27/2023
They're okay. They don't seem very bright, but I'll have to see them in the dark, I guess. They could have easily left the wires so you could use them as they are or pull them back inside for stud-powered applications. I had to drill holes in the light to feed the wires back inside of the light to hook them up. Would have been nice if they were going to just be dumped in a box and sent out if they had the protective film over the lenses. Out of 13, 1 isn't all scuffed up from shipping. The screws have a pedestal under the light, so that hits before the rest of the light, leaving a gap all the way around.
by: Daniel 02/03/2024
Had a faulty light, and they quickly sent me out another one perfect A+
by: ZH10/07/2023
Works as described. Good replacement
by: Terry 08/11/2023
Perfect replacement parts, Kim was awes ome.
by: Terence 05/09/2023
Great product. Really appreciate that the wires are pre stripped. Just wish there was a seal for the backside of the lights to
Seal the back from water intrusion
by: Alex09/20/2015
Great prices ! ,fantastic service,fast shipping = 100% satisfaction! :-) thanks
by: Norm 05/05/2023
Still looking and running well. We are so happy that we were able to find these and replace the old ones that were on our little toybox trailer.
by: erniet10/07/2017
Nice size light to mount on 2" angle iron that I'm making a light bar to mount on the rear and top of my pickup bed. I'll be using the light bar while towing the pickup behind my motorhome this winter. I am using 2 of the these lights in the center of the light bar. I'll have 2 larger lights with brake and turn signals on each end of the light bar.
Erniet
10/14/2018
The lights mounted easily and were the right size plus they were bright!!!
by: Baltazar Cerda01/25/2020
Great product and fast service
Baltazar C.
1/26/2021
Great
25
360
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Recommended Marker Light For Fenders On 1999 Pace WorksportI don't have the specs for your specific light as manufacturers constantly change lights, but I can make a recommendation for you to replace what was ripped out. I see two different colors online, so I'll give you an option for an amber light and a red light. For an amber light, I recommend the Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base, # MC32AB. This light is 4 long x 2 tall x 1-1/8 inches deep. It is a surface mount with a twist-in...
view full answer... - Availability of Gasket for Marker Lights on MotorhomeThere is not specific gasket made for either the # 47-59-001 or the # MCL32RB trailer clearance lights but I do have a solution for you. I've attached an installation video that shows our installer using the TremPro Silicone Sealant # 0160297. This will create a waterproof seal or gasket for your new lights. The gasket that may work for you, but is designed for the MC series lights is # A32GB. This gasket was designed to fit 4 inch by 2 inch lights. I have linked the above mentioned...
view full answer... - Replacement Lens for Optronics MC32RB Clearance/Marker LightThe replacement red lens for the Optronics # MCL32RB and # MC32RB clearance/marker light is part # A32RB which is the red version of the # A32AB lens you mentioned.
view full answer... - Can Low Profile Trailer Taillight RVSTLB61 Install on Left and Right Side of TrailerYes, you could install two of the trailer taillights # RVSTLB61 at the rear of a vehicle like you are wanting. One can install on either side. The only difference between this and the # RVSTLB60 is the license plate bracket.
view full answer... - Replacing Existing Clearance Lights on a Lancer Camper with Yellow and Green WiringTrailer clearance lights have one wire for the power and one wire for the ground. You'll need to test your trailer light wiring with a Digital Multimeter to determine which color controls which function. There are no standard guidelines for trailer wiring so I can not tell you which wire does what. I recommend item # PT89ZR this multimeter will allow you to safely troubleshoot a variety of electrical circuits and help you to identify which wire is for power and ground. I recommend the...
view full answer... - LED Replacement Trailer Lights for Optronics 20327-02We have exactly what you need directly from Optronics. You can get them with either a white base or a black base depending on what you need to match your trailer. White Base Red - # MCL32RB Amber - # MCL32ATB Black Base Red - # MCL32RBB Amber - # MCL32ABB Attached are some review videos for you to check out.
view full answer... - Optronics LED Trailer Clearance or Side Marker Light With Black BaseIf you don't like the white base of the LED Trailer Clearance or Side Marker Light # MCL32RB we do have the exact same light with a black base: - LED Trailer Clearance or Side Marker Light with Reflex Reflector - 3 Diodes - Black Base - Red Lens # MCL32RBB I have added a link to a video review for you to check out as well.
view full answer... - Installing LED Clearance Lights With 2 WiresTwo-wire LED clearance lights such as the Red # MCL32RB or the Amber # MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black is power and white is ground for these lights. If you take a look at the video I have linked you can see how these lights are installed. I have also attached a couple of links to help articles on trailer wiring which you should find useful.
view full answer... - Will Trailer Clearance Light w/ Reflex Reflector - LED # MCL32RB Replace Bargman 59 LightYes, the Trailer Clearance or Side Marker Light w/ Reflex Reflector - LED # MCL32RB that you referenced would be a direct replacement for a Bargman 59 series trailer taillight.
view full answer... - Is the LED Trailer Clearance or Side Marker Light MCL32AB Offered In RedThe LED Trailer Clearance or Side Marker Light is offered in both amber as part # MCL32AB and red as part # MCL32RB. These are a pretty standard design so they are a common replacement for both older and newer trailers. Simply attach the power and ground wire at the rear, pop-off the lens, secure the base, then re-secure the lens and you're done.
view full answer... - Replacement Light for Optronics Red Clearance Light 20327-02Optronics discontinued their light model 20327-02 some years back and we no longer have lens or base parts for it. You can instead use part # MC32RB for an incandescent light or part # MCL32RB for a high-efficiency LED type. Both have a white base.
view full answer...
- Replacement Lens for Red Clearance Light on 2017 Forest River R-Pod Travel TrailerThe LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens # MCL32RB does have just the lens available as part # A32RB. If that is your light, you will be able to just swap the lens. I've linked the page to all our options to assist if you have a different size or style light.
view full answer... - How To Identify Trailer Marker Clearance Lamp to Find Correct ReplacementAre you speaking of a clearance/marker light? If so, the numbers you provided state that the lamp's lens is compliant with certain DOT regualations, but isn't necessarily an identifier that would help in finding a correct replacement. I'd recommend checking the lamp housing itself, and examine it closely for a part number. If I can get the actual part number of the lamp itself, or a photo with dimensions I can recommend a replacement lens or lamp if a lens isn't available. The # MCL32RB...
view full answer...
- Red Lens Replacement Sae-a-p2-dot-14 For A 2018 Keystone CamperThe Replacement Amber Lens for MC32AB Trailer Lights # A32AB is a direct replacement for the Sae-a-p2-dot-14 that measures 4" L x 2" W x 1/2" H. A red lens replacement with the same dimensions is the LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL32RB. Included are video resources with more information from here.
view full answer... - Replacement Clearance Lights Options For a 1991 Newmar American Star 25RK 5TH Wheel RV CamperYes, we do have these lights available in both incandescent or LED. The lights will all have a white base and the lights have an overall size of 4" long by 2" wide and 1" deep. Incandescent Amber Lens # MC32AB Incandescent Red Lens # MC32RB LED Amber Lens # MCL32AB LED Red Lens # MCL32RB Amber Replacement Lens # A32AB Red Replacement Lens # A32RB I recommend getting a couple spare lenses in the event one of them becomes damaged while driving.
view full answer... - Replacing The Light And/Or Lens On A Bargman 34-59-010 LED LightI do have an option for you but unfortunately the Bargman lens 34-59-010 you are looking for is no longer available. The lights themselves are also not available. I can offer you a virtually identical light in the Optronics # MCL32RB. This is a 4" long x 2" tall x 1' deep red LED clearance or side marker light, and will be virtually identical to your Bargman LED lights.
view full answer... - Recommendation for Durable LED Clearance Light for Utility Trailer We do have a large selection of LED clearance lights available that closely match the dimensions you provided for your existing assemblies. I have attached a couple links that will take you directly to this selection that you can look through. In general, LED tail lights will indeed be a bit more durable than standard incandescents just because they use diodes instead of the more fragile bulbs and filaments inside the assembly. They will certainly be able to handle more shock and vibration...
view full answer... - Recommended Trailer Lights with Built-In Reflector The Optronics trailer light assemblies referenced in your question do not feature built-in reflectors. If needed on your trailer, they will just need to be added separately with these lights installed. For a similar red clearance light that features a built-in reflector, I recommend the Optronics # MCL32RB and for an amber lens you can use # MCL32AB. For a red and white LED tail light, the Bargman Triple Tail Light # 47-84-009 will be a good option. I have attached a few short video...
view full answer... - Can Too Many LED Trailer Lights Make Them DimYes, too many lights, be it tail lights like the Optronics FLEET Count LED Backup Light for Truck or Trailer # BUL12CFB or clearance lights like the LED Trailer Clearance or Side Marker Light # MCL32RB can make them dim. That said, LED lights are far less likely to do that, as they draw much less power; for example, the FLEET backup light only draws 0.260 amps, and the LED clearance only draws 0.06 amps, so you'll simply need to ensure you don't overload it based on whatever your converter...
view full answer... - Replacement Marker Light Lens For A 2015 Jayco Jay Flight 195RB SLXThe light you are describing sounds very much like the Optronics # MCL32RB. It fits all of your parameters at a 4" long and 2" wide gently curved rectangle with rounded corners. If you are in need of just the lens we have that as part # A32RB. We do not have a way to know exactly what brand or model of light you have based off of the year make and model of camper, but it sounds like this is what you have. Are there any numbers on the base of the light that you can see? A lot of times...
view full answer... - Does the Clearance Light # MCL32AB and the # MCL32RB Have GasketsThe part # MCL32AB and the # MCL32RB do not come with gaskets. But you could use sealant like part # 0160297 to make one if you needed.
view full answer... - Replacement LED Marker Lights for a 2009 Timberlodge CamperThanks for providing the picture. It looks like your current marker light is around 3 3/4" long and 1 1/2"- 2" wide and has mounting holes 3" apart. While we don't have anything in those exact dimensions, we do have several that are slightly larger so when you replace yours you will be able to completely cover the space the old lights used to be. I am slightly concerned about the width of your current light and how it fits in the groves on the side of your camper. I am going to recommend...
view full answer...
- Clearance and Side Marker Lights That Are Made In The USAThe Optronics Red LED Trailer Clearance or Side Marker Light # MCL32RB will come from their factory in Taiwan. If you are looking for clearance lights that are made in the USA I recommend the Peterson Double Bullseye Clearance and Side Marker Trailer Light in Red # 425800 or Amber # 425600. These have the same 4" long by 2" wide footprint but use bulbs rather than LED's. The bulbs can be swapped for LED's # DI88VR if you prefer the lower power draw and longer life of LED lights.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Laura H
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amy B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jim
1/15/2024
There have been no problems whatsoever with the light. I don’t give it a second thought.