To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Subaru Crosstrek with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the interior trim panel in your rear cargo area. Once you've plugged in the converter, insert the included 10-amp fuse into the integrated fuse holder.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area. Adhere the black converter box to the frame of the car using the double-sided tape provided. Secure any loose parts of the T-connector with the provided cable ties.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (2455 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Love it. You guys always have the best information, advice and products. Well done with this product too. Everything you need is included in the order, other than an electric drill. Plenty of length too. I was able to run it through the grommet under the spare tire and link up to the trailer pin. I can’t stand the idea of just letting the wire run under the trunk hatch since it needs to be hooked up to my bike rack.
Everything arrived in great condition and a lot sooner than I expected. I was even able to install it over the weekend.
I love the way most of the hitch is tucked away, out of sight. Can't wait to tow my boat and get back on the water.
The trailer wiring harness was super easy to install and tuck's away while not in use.
All in all, I am super satisfied with the whole experience. From the high quality of the product, timeliness of delivery, and minimal or low level of effort to stall the whole thing.
Thanks for everything. I attached some before and after photos.
I bought this trailer hitch for my new Subaru Outback. After watching the install video several times, it was very easy to install.
Electrically and mechanically everything works beautifully. It blends with the car, and I've had no trouble pulling my Jeep's 4x6 trailer to the county dump and hardware/garden stores.
The excellent quality, ease of installation and low price cannot be beat!
Ordered hitch from etrailer it arrived quickly. I waited to to install until the weather warmed up, paperwork says install time for expert 30 minutes, novice 1 hour. I spent about 2 hours installing it by myself. the packaged parts contained all the parts needed for install, along with threaded wire to help with install. the most difficult part was supping hitch into position, and applying flange nuts. had to use ratchet straps to pull into place.all in all anyone who has some mechanical ability should be able to install it.Note: you will need a torque wrench in final assembly.
Hitch works great and when I don’t use it the wiring harness goes right in with my spare tire keeping it from getting road salt all over it!! Thanks eTrailer!!
This is the second etrailer hitch that I have installed. The how-to videos were extremely helpful. They have really gotten it down to a science and made the process very easy to follow.
We have been ordering trailer hitches from you for 10 years. Our business is Bradley car care and this was my own new Subaru and it works great. My third hitch from you. Thank you so much for what you do for our business.
Fits perfectly. Easy to stash near spare tire when not used. Electrons flow through it and the trailer lights work.
Curt T-Connector was the easiest trailer wiring harness to install. The instructions were perfect and so easy to follow. Very, very good product at a most reasonable price.
It works well, but the wire harnes is slightly shorter than what’s on the video. I was unable to tuck the module with the two sided tape the same was as the video.
This was easy to install. Instructions were straightforward. I like that it’s stored inside the car out of the way with the spare tire when not being used
Etrailer is my go to supplier of my towing needs and much more. I appreciate the quick and friendly service. My advice is check with Etrailer first before the parts house or big "Mart" stores.
Installing this harness could not have been easier. This is a plug-in unit and the installation video was excellent, though I didn't feel the need to take the long strip over the lock off. I installed it coming through the hatch. It would have taken a lot less time if my lady friend hadn't been texting me.
Works well, easy to install. Installation tip not mentioned in the video - Rear trim piece must be pulled out (toward front of car) before pulling up.
Still have yet to test it out but it seemed to plug in fine. I didn't like the method of pinching the cable on the rear hatch when in use since I wanted to keep the harness mounted on the hitch at all times so I referred to a different install video that showed me how to run the wires through a grommet in the rear of the vehicle.
Products were top quality! The installation went very well, primarily from me watching the video on the product listing. The video was clear and MUCH better than the written directions. I get all of my trailer needs from etrailer, past, present, and future! Tammie from customer service was great, checking in and making sure everything was perfect on my order! Thanks!
Top quality hitch that was easy to mount. The video about installing on my specific vehicle was very useful.
Great product quality. Like the hitch I purchased from Etrailer great quality at a good price. The dealer wanted $250 for this $35 product. The videos on how to install are great!
I am very pleased with the results. It went a lot faster once the wiring connector at the left tail light was located. It would have saves a lot of time and frustration if a picture could
be included With an arrow pointing to the correct connection. It also would have helped a lot if I had ordered the correct kit but to start with, but they were excellent in sending the correct kit and refunding for the first one.
Hitch fit perfectly on our 2022 Subaru Outback. Pretty straightforward installation. Shipping was fast once order placed.
Matched my utility trailer and 2023 Subaru Forester and was easy to install.
This is the second trailer hitch and wire harness I've bought from etrailer and I am beyond satisfied! They leave no stone unturned for instructions and customer service. The video tutorials and the products are fantastic. I will never go anywhere else for trailer hitch and accessories.
Plugged right in. It was a little tricky getting access, but thats because Subaru used a few plastic retainers that were tricky. I did need a thread tapper and bolt to ground the thing, but otherwise it was cake.
Great service and perfect addition to my new Crosstrek Wilderness, harness says 2020 but it works with 2024 according to Curt.
Watched the video on the website how to install which made the install very easy. Have yet to test it but looks good and ready to go.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.