Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
(77 reviews)
Price: $23.50
In Stock
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
Item # 331-TPH-017
Retail:$56.48
Our Price: $23.50
You Save: 58%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (77)
- Q & A (0)
- Videos (2)
- Photos
Redarc Accessories and Parts - 331-TPH-017
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Redarc
- Universal
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Features:
- Wiring adapter lets you easily connect your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller to your existing Tekonsha brake controller wiring harness
- No need to remove your existing wiring harness when replacing your old brake controller
- One end plugs into Tekonsha wiring harness
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic (331-EBRHV2)
- 2-Year warranty
TPH-017 Redarc Tow Pro Wiring Loom Adapter for Existing Tekonsha Brake Controller Harness Connection
California residents: click here
Video of Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redarc Tow-Pro Wiring Adapter Review
Brad Hello neighbors, it's Brad here at Etrailer. And today we're taking a look at the Redarc to Tekonsha wiring adapter for your brake controller. The Tow-Pro Elite is a great system, but unfortunately the downside of Redarc is, they don't have a lot of vehicles specific clips, and so you're left with having to tie these into the wiring on the vehicle. I'm not a huge fan of making connections. If there is a plug and play option available, and that's where this comes into play. Now, this plugs into a Tekonsha plug that goes to our factory clip.
So what they did is they've made this little piggyback adapter here that goes from the Tow-Pro Elite module to the Tekonsha wiring that goes to the factory style plug. And Tekonsha has quite a wide variety of different vehicles. So you generally can find something that's specific to the clips on your vehicle to make it nice and easy. And instead of designing their own for each vehicle specific they just use the Tekonsha, and then this little plug goes into that adapter, making it nice and easy and not having to splice wires. So to get this to work for your specific vehicle, you wanna use our fit guide on the website to determine the Tekonsha wire that you'll need for your vehicle, and then you can simply get this adapter to the Tekonsha and you're gonna be good to go.
In conjunction with that Tekonsha wiring, you can see, we we're able to plug into our factory wiring on the vehicle, no tools required. And that was a look at the Redarc to Tekonsha wiring adapter for your Tow Pro..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness - 331-TPH-017
Average Customer Rating: 4.8 out of 5 stars (77 Customer Reviews)
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.by: Alvin 04/27/2024
The Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness made my Redarc install easier.
by: John04/13/2024
Hardest part was trying not to sweat to death in the SC heat. This was super easy to install once I located the receptacle on the car itself.
by: Ryan 02/07/2024
Great controller
by: Ray07/24/2023
The reason for the average rating is shipping. I requested expided shipping as we were leaving on our adventure. If I knew that wasn't available I would have cancled the order and sourced these parts elsewhere. You made your sale and I'm stuck making other arrangements. Your system is not flexable as I tried to change shipping address or pick up in person. All a solid NO.
by: Mark02/28/2023
This brake controller worked well in our 2020 Suburu Ascent. Modified the blank switch plug under the dash to the left of the steering wheel. This took a little time to ream out with a dremel type tool, but the controller know fit in and worked well (youtube videos can be found for this).
by: Not a happy Customer05/02/2023
Was saddened to see that this product was delayed by shipping whether at etrailers facility or with the USPS. It was delayed more than 4 days causing me to purchase from camping world at a higher cost in order to meet my departure schedule. Not a happy customer.
by: Jim 05/09/2023
Just What I needed to connect my Redarc Tow-Pro to my vehicle.
by: Carl 03/21/2023
Made wiring up the brake controller a whole lot easier.
by: James07/19/2022
We ordered this product on June 29th and paid for next day shipping to get it before we left for vacation. We were told it would be delivered on July 5th the day before were to leave. I kept checking the progress and saw no activity until July 4th, a holiday! The package didn't get pickup by for shipping until the 5th. The tracking said though that it would be delivered by 12pm on the 6th. So we waited and it didn't come! We had to leave and luckily our friends were leaving the next day and brought it with them so we could have a trailer brake. I will be contacting the company for a refund on the shipping because we were told the item would go out the day we bought it and that we get it on July 5th. Neither of those happened. On the bright side the trailer brake worked great.
by: Randall08/01/2023
Easy to install saves having to replace existing wiring
by: Arnold 07/27/2023
Easy install
by: Doug05/19/2021
This is totally not necessary. The Redarc gives you a plug that fits. It follows the same color code as the Tekonsha harness. It will be a simple 2 minute splice job. I will be splicing the harnesses instead of using this. The wires used in the adapter are smaller that those used in either the Redarc or Tekonsha harnesses use. Although it was built fine, it is a waste of money.
Heather A.
5/20/2021
Thank you for your review. This Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness is designed so that you will not need to splice wires when installing the brake controller.
by: John 01/26/2023
Madre the installation so much easier!
by: JustSomeGuy04/27/2022
This adapter coupled with a Tekonsha Plug-In Wiring Adapter (Item #3062-P) worked as advertised to connect my 2022 Subaru Ascent with the factory tow package to a Redarc Tow-Pro Elite Trailer Brake Controller (Item #RED44FR). Just wish I didn't need the non-Redarc adapter in addition to this to finish the project.
by: Jan 09/07/2022
Absolutely excellent! I switched from an app-based assist-brake control to this product. Night and day. From constant worry to being constantly impressed. Thanks!
by: Shawn 09/03/2022
Fast shipping, works great with a Gladiator and an Airstream.
by: Michael 07/04/2022
Works great and doesn't take up much room. Easy installation with great instructions.
by: U.P.04/03/2022
received adapter with harness wire and installed in 2021 jeep grand Cherokee limited with factory installed tow package. Everything connected.
by: Anthony 06/22/2022
Works great and was pretty easy to install. eTrailer support helped ensure I had all the right parts.
by: Richard 06/12/2021
Part was exactly what I needed to complete my Redarc brake controller installation.
by: Joseph 07/17/2020
The 331-TPH-017 connection converter worked as advertised to easily and quickly convert my JT's Mopar connector over to the Redarc connector.
by: Jason06/09/2022
This made the brake controller truly plug and play.
by: Charles06/25/2019
I am sorry to say that I ordered the wrong part. I still want it though. Thanks for the fast shipping as I needed this part for my brake controller. I ordered the part before I left LV, Nev and it sent to Stockton. I expected the part Monday, but it arrived Saturday. But the bummer was the part didn't fit the back of my controller.
by: Doris 10/23/2020
Perfect fit! We had the Tekonsha pigtail for the Gladiator but not the plug-and-play connection to the RedArc brake controller. This was it!
by: Anthony 01/14/2023
Holding up the way it should. Made the install easy.
25
77
Show More Reviews
See what our Experts say about this Redarc Accessories and Parts
- Recommended 7-Way and Brake Controller for a 2019 Toyota Highlander XLEYes, the Tekonsha OEM Replacement Vehicle Wiring Harness item # 22119 will fit your 2019 Toyota Highlander. This will provide you with a 7-Way connector and a Tekonsha brake controller adapter. This wiring harness is custom fit and plugs directly into a port in the cargo area of your Highlander. The only wiring you will have to do is for the brake controller adapter. I have linked an installation video below. For a compatible brake controller, I recommend the Redarc Tow-Pro Liberty...
view full answer... - Brake Controller Location in 2021 Ford F-350The brake controller plug is located behind the coin tray that's just to the left of the HVAC controls on your 2021 Ford Super Duty. I've shown the location with some photos, and you can also see the location in the linked installation video. If you don't already have a brake controller in mind, I'd recommend the Tow Pro Liberty by Redarc, part # RED24FR. The main unit installs under the dash so it's out of the way. You'd adjust the brakes using the remote-mounted control knob that can...
view full answer...
- 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch ReceiverCurrently the Vehicle Wiring Harness # C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most useful wiring as I see your CX-50 has a maximum towing capacity of 2,000lbs to 3,500lbs depending on your exact factory options. You can always check with your dealer to determine your exact towing capacity. A Mounting Bracket # C58001 will allow...
view full answer... - Parts Needed To Install a 7-Way and Trailer Brake Controller On a 2022 Hyundai Santa CruzTo install a 7-way on your 2023 Hyundai Santa Cruz you will need the Tekonsha OEM Replacement Vehicle Wiring Harness # TK44ZR. This will give you the wiring needed to install a 7-way along with the wiring for a brake controller. You will be able to plug and play the Redarc Liberty Controller # RED24FR using the Adapter # 331-TPH-017. The Redarc is a great controller as it only uses a small dash mounted control knob. You can attach the 7-way to the Curt Receiver # C23WR using the Mounting...
view full answer... - Wiring Needed To Install Redarc Tow-Pro Liberty Trailer Brake Controller On a 2005 Dakota with 7-WayThe easiest way to connect the Redarc Tow-Pro Liberty Brake Controller # RED24FR to your 2005 Dodge Dakota with factory 7-way is by using the Tekonsha Wiring # 3020-P with the Redarc to Tekonsha Adapter # 331-TPH-017. This will give you a plug and play installation so you do not have to worry about splicing wiring together. If you already have the Tekonsha Wiring # 3020-S you will then need the Universal Redarc Wiring # RED69FR to splice with this. This will then connect the Liberty Controller...
view full answer... - Recommended Brake Controller for a 2022 Ford Explorer w/ Factory Towing Package Since your 2022 Ford Explorer has the factory tow package you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3035-P to install the Redarc Tow-Pro Elite item # RED63RR. This adapter will connect to the one that comes with the Tow-Pro Elite and allow you to plug into a port located behind the appearance panel on the driver's side. Just remove the two screws to get the panel to drop, you are looking for a grey plug. The grey plug is sometimes taped together...
view full answer... - Installing a Redarc RED44FR in a 2021 Subaru AscentThe 2021 Subaru Ascent that came from the factory with their tow package actually has a port under the dash where you can plug the Redarc Tow-Pro Elite # RED44FR directly into with an adapter. The Tekonsha Pigtail # 3062-P would plug directly into said port. You will also need the Redarc to Tekonsha adapter # 331-TPH-017 to complete the install. Unfortunately we haven't done any installs on the Ascent, so we do not have any videos as of yet.
view full answer... - Installing Redarc Tow-Pro Elite Brake Controller on 2019 Toyota 4Runner Using Tekonsha AdapterYou actually can still use your # 3041-P wiring adapter to install the Redarc Tow-Pro Elite # RED44FR on your 2019 Toyota 4Runner! All you need to do is either use the Adapter # 331-TPH-017 or cut off the black connector from the adapter and then splice the included pigtail from the Tow-Pro Elite to the adapter color for color using butt connectors # DW05744-5. I recommend using the wiring adapter to make things easier. You can then use the Universal Mounting Panel # 331-TPSI-001 to complete...
view full answer... - Installing Redarc Tow-Pro Brake Controller on 2018 Jeep JL Wrangler Unlimited with Tow PackageIf your 2018 Jeep JL Wrangler Unlimited is equipped with the factory tow package, which should include a 7-Way connector at the rear bumper (you can check to be sure), the only additional components you will need outside of the Redarc Tow-Pro Elite Brake Controller # RED44FR itself is the Tekonsha Plug-In Wiring Adapter # 3073-P and Tow Pro Adapter # 331-TPH-017. The Tekonsha Plug-In Adapter will simply get plugged into the factory port beneath the dash of your Wrangler at one end and...
view full answer... - Parts Needed To Install Redarc Tow-Pro Brake Controller on a 2015 Toyota TacomaIn order to install the Redarc Tow-Pro Liberty Brake Controller part # RED24FR or Tow Pro Elite part # RED44FR on a 2015 Toyota Tacoma you'll need the Tekonsha Plug-In Wiring Adapter part # 3040-P, the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness part # 331-TPH-017, and the Mounting Panel for Redarc Trailer Brake Controller Control Knob part # 331-TPSI-002. This is a completely plug-in-play option without splicing.
view full answer... - Redarc Controller on 2020 Jeep Gladiator in CaliforniaYou don't absolutely need the # 331-TPH-017, but if you don't use it, you'll need to cut one end off of the # 3073-P and wire it color for color to the pigtail included with the # RED44FR Tow Pro Elite. If you'd rather not connect those wires together, that's where the # TPH-017 comes in. I've linked to a product video that explains how the Tow Pro Elite works, as well as to an installation video.
view full answer... - What All Is Needed To Install The Redarc Tow-Pro Elite On A 2021 Subaru AscentThe Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR can definitely be installed on your 2021 Subaru Ascent, but how it hooks up to your vehicle will depend on how it came wired from the manufacturer. If you have the factory tow package, the install will be quick and easy. The Tekonsha Harness # 3062-P will allow you to plug directly into a port under the dash, and the # 331-TPH-017 will then adapt that harness to attach directly to the # RED44FR controller. There is not currently...
view full answer... - Recommended Trailer Brake Controller For a Motorhome With 2022 E-450 Cutaway ChassisFor your 2022 Ford E-450 Cutaway Chassis I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 with a Tekonsha Plug-In Wiring Adapter # 22292. This installation will be a little more involved than the installation on your GMC as the plug in for the adapter is located near the top of the dash and not underneath the dash where it is more accessible. I have linked an installation video that was done on a 2020 chassis so you can see where the connector is located. Do understand...
view full answer... - Wiring Harness Required To Connect Redarc Brake Controller To a 2021 Ford E-450 Class C MotorhomeTo install the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 2021 Forest River Sunseeker with the Ford E-450 chassis you will need to make your own harness as one is not available. This is easily done by connecting the Redarc Universal Wiring Harness # 331-TPH-017 with the Tekonsha Custom Wiring Adapter # 3034-P.
view full answer... - Parts Needed for Redarc Elite Brake Controller & 2020 Jeep GladiatorFor best plug and play wiring set-up for your 2020 Jeep Gladiator, you will want Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Use of this along with the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness, #...
view full answer... - Recommended Hitch, Wiring Harness, and Brake Controller for a 2022 Durango w/ the Towing PackageI would be happy to help you set your 2022 Dodge Durango up to tow your cargo trailer. I have linked all necessary parts below along with any pictures and installation videos we have that will help you install them. For a hitch, I recommend the Draw-Tite Max-Frame Trailer Hitch item # DT38MR. This hitch is custom fit and bolts to your Durango with included hardware. I really like this hitch because it mounts behind your rear bumper and is completely concealed behind the cover when you...
view full answer...
- Parts Needed to Install Redarc Tow-Pro Brake Controller on 2012 Toyota SequoiaYou're on the right track, all the parts you mentioned are exactly what you'd need but may I make a suggestion? Rather than the # RED44FR Tow-Pro Elite, I'd recommend the # RED24FR Tow-Pro Liberty instead. The primary difference between the two is that the Elite features what Redarc refers to as a user controlled mode, which allows the controller to operate as a time-delayed controller which could be useful if you tow a trailer off road. If you have zero plans to ever tow your trailer...
view full answer... - Redarc Tow-Pro Liberty Brake Controller Wiring Adapter in 2020 Jeep GladiatorIn order to install the Redarc Tow-Pro Liberty Brake Controller # RED24FR in your 2020 Jeep Gladiator you will need the Tekonsha wiring adapter. The Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P is confirmed to fit your Jeep Gladiator. You will also need the # 331-TPH-017. I have attached a review of the adapter for your reference.
view full answer... - Why Did Toyota Dealer Tell Me My 2020 Toyota Highlander Cannot Have A 7-way Connector Installed?The dealer tech you talked to is somewhat correct. The issue is that the red brake output wire can back feed into the wiring of your 2020 Toyota Highlander, but there is a fix that will fix this. Your Highlander will need to have a Tekonsha, Draw-Tite, or Redarc trailer brake controller installed, and then you can use the Pigtail Wiring Harness with Diode for Tekonsha and Draw-Tite Brake Controllers # 7865. If you have a Redarc controller you will also need the Redarc Tow-Pro Wiring Adapter...
view full answer... - Factory Trailer Brake Controller Vs Aftermarket for a 2021 Chevy Silverado 1500In order to install a factory trailer brake controller on a 2021 Chevrolet Silverado 1500 you will indeed need to have the computer re-flashed at the dealer in addition to purchasing the actual controller. That said, for a much more reliable and cost effective solution I recommend going aftermarket. These typically last much longer and preform better (more settings) than the factory controller not to mention being a fraction of the cost in the end. The Redarc Tow-Pro Elite Trailer Brake...
view full answer... - Availability of Plug and Play Wiring Harness for 2024 Kia Telluride SX Prestige X-Pro Installing RedWe do have a cable that will allow you to plug the Redarc Tow-Pro Liberty Brake Controller # RED24FR into the port under your dash. What you need is the Tekonsha # TK78VR along with the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017. The Tekonsha harness will fit your factory plug and then the adapter will allow you to plug it into the Liberty. I attached an installation video on a 2023 Telluride below for your reference.
view full answer... - Tow-Pro Elite Brake Controller & Adapter For 2014 Acura MDX With Factory 7-WayYou do have the exact right parts for the Redarc brake controller as well as the adapters needed for your 2014 Acura MDX with the factory 7-way in order to make this a plug and play installation: - Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR - Tekonsha Plug-In Wiring Adapter # 3028-P - Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017 The Redarc adapter will be connected between the Tow-Pro Elite and the Tekonsha wiring harness; without this...
view full answer... - How To Use Redarc Tow Pro Elite Trailer Brake Controller On 2021 Toyota SequoiaThe Redarc Tow Pro Elite Trailer Brake Controller part # RED44FR is an excellent option for a 2021 Toyota Sequoia. In order to use one of the panels in the dash you'll need to add the Mounting Panel part # 331-TPSI-002 . In order to plug into the vehicle's brake controller port you'll also need the Tekonsha Custom Wiring Adapter part # 3040-P along with # 331-TPH-017.
view full answer... - Recommended 7-Way Connector and Brake Controller for a 2022 Toyota Highlander I would be happy to clarify things for you and make a couple of recommendations. You will want to use the Tekonsha item # TK57VR over the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The Tekonsha is custom fit and will plug directly into a port on your Highlander plus it will provide you with a brake controller adapter so no splicing into your Highlander's wiring harness. The item # ETBC7 is a universal option and requires a lot of cutting and splicing of wires....
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Jonathan Y
Installed by:
Cole B
Test Fit:
Andrew J
Test Fit:
Bradley B
Updated by:
Wilson B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
7/22/2022
I am sorry about that! I expect that things were behind because of the holiday in your region. Customer service will contact you.