What All Is Needed To Install The Redarc Tow-Pro Elite On A 2021 Subaru Ascent

Question

Question:

I’m looking at the red arc brake controller for my 21 Subaru ascent RED44FR, do I need a wiring harness adapter for this, and is there a specific dash mount plate for this vehicle? Thx

asked by: Thaddeus D

0

Expert Reply:

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR can definitely be installed on your 2021 Subaru Ascent, but how it hooks up to your vehicle will depend on how it came wired from the manufacturer.

If you have the factory tow package, the install will be quick and easy. The Tekonsha Harness # 3062-P will allow you to plug directly into a port under the dash, and the # 331-TPH-017 will then adapt that harness to attach directly to the # RED44FR controller. There is not currently a dash mount plate for your vehicle, but if you do not have the 7 Way on the back of your Ascent, we do have the Tekonsha # 118290. This is a plug and play harness for vehicles with the tow package and will also make for a quick and easy install.

On the other hand, if your 2021 Ascent did not come with the factory tow package, the install will be a bit more involved. To start with, you will need a 4 Flat harness. The Tekonsha # 118790 will be a plug and play option and is highly recommended. Our Universal Installation Kit for Trailer Brake Controller # ETBC7 will then piggyback off this and will include all the wiring, circuit breakers, 7 Way plug, and all bracketry needed to get the # RED44FR up and running.

Though this install is more involved, it isn't overly difficult. Especially if you have done something like this before. I did include some install videos on other vehicles for you to check out, but it will be much the same when hooking up your 2021 Ascent.

expert reply by: Lazer S

0

Answer 1

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

What All Is Needed To Install The Redarc Tow-Pro Elite On A 2021 Subaru Ascent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching