bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13577
Retail:$325.95
Our Price: $201.73
You Save: $124.22
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 27 lbs
Add to cart
In Stock
CURT 400 lbs TW Trailer Hitch - 13577
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13577 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (176)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13577

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 400 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 400 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13577 Curt Class 3 Trailer Hitch Receiver

Installation Details 13577 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13577

Average Customer Rating:  4.8 out of 5 stars   (176 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Very happy with this trailer hitch. Price was right and it has been working beautifully for the past year. etrailer.com made the purchase very easy and the delivery fast. I would definitely but from etrailer.com again!



by:
2012 Nissan Murano

hi i just got hitch great value looks good i haven,t put it on yet i will let you no thanx paul very fast shipping



by:

works good but is very rusted



by:
2012 Nissan Murano

Good looking heavy duty hitch, VERY easy to install! On my 2012 Nissan Murano, I did NOT have to lower the exhaust. I gently pushed in the bottom skirt below the bumper and gained enough room to raise the right side into place after I'd placed the left side (drivers side) where it needed to be and got one bolt started. Seemed to work great. Wiring harness worked exactly as described, but you do have to disassemble a lot of the rear of the car, so be ready for that. Very happy with my purchase, 3rd time I've bought from eTrailer and will continue to do so. Keep it up, guys!



by:
2009 Nissan Murano

Outstanding product, easy to install, worked as advertised. The hitch bolted right in and I did not have to drop the exhaust...very straight forward process. I also ordered and installed the wiring harness and 4 pin bracket, no issues; instructions were precise and on target. Great product and great service.



by:
2009 Nissan Murano

The Curt trailer hitch fits and looks great on my 2009 Nissan Murano. The unexpected problem with the install is 3 of the 4 needed bolt holes in the frame of the vehicle were corroded from road exposure, preventing threading of the bolts. To correct this, I purchased a 12mm -1.25 metric tap and T-handle tap wrench (from Menards for around $15 total). I did have to lower the exhaust assembly (per the instructions) to gain access to use the tap. With use of a spray lubricant, the tap cleaned out the threads without much difficulty. Just get it straight when you start and it works well. Took a total of about 90 minutes in all with the failed attempts to insert the bolts on the first try, then tapping of the 3 bolt holes.



by:

Overall nice fit on the Morano, a lot less bulky than we anticipated, if we knew it was this easy to install we would of done this years ago! Fairly straight forward install and certainly appreciate the installation video provided as it saved us time on getting this hitch installed.

Only complaint is the “free” shipping offered doesn’t apply to Alaska !



by:
2009 Nissan Murano

Shipping was fast and etrailer customer service was on the ball at keeping me informed as well as making it simple to access videos on how to install the trailer hitch and the wiring.

I will definitely be using etrailer for all my future trailer needs.



by:
2014 Nissan Murano

Fit perfectly to my Murano 2014. I didn't have to raise it. I used two jack stand to help me line up the hitch. The hardest part for me is removing the rubber holding the muffler assembly. WD-40 really helps though. Tip. If no one is helping you to hold the hitch, use two jack stand.



by:

Thankfully it fit good. Was worried. Easy to install. Hardly noticeable under the car. Very pleased hope this helps others feel confident to purchase online.



by:
Nissan Murano

WOW!!! A perfect fit for our Nissan Murano CrossCabrolet . My girlfriend and I installed in in about 20 minutes. We did not remove the exhaust. I cleaned the holes on frame with a battery terminal brush, the hardest part. It's a little tight working around the exhaust, but easier than letting it down. We bought a cargo carrier to haul extra anything and have a bike rack. Also pull jet skis, about 1,500 lbs. a great solution.



by:
Pontiac Trans Sport Van

Added this hitch to our SUV so we could transport our fat tire bikes to weekend trips. It was easy to install and works great. Very happy with this hitch.



by:
2012 Nissan Murano

This was an easy install!! The videos and instructions on etrailer’s website were very easy to follow. I didn’t drop the exhaust because I couldn’t get the holders out of the gaskets but I could easily work around that. Took less than 30 minutes to install & maybe 15 minutes to install the wiring for the lights.



by:
2014 Nissan Murano

Very quick shipping, great price. Hitch fit perfectly. Easy install. Instructions said install would take 40 minutes. I easily did it by myself with no lift in that amount of time. My second great experience with etrailer.com.



by:
2012 Nissan Murano

Wanted to share photos of my newly installed receiver hitch & wiring for
lights I received this past Friday for my new vehicle. I want to thank both
Natalie & Shawn for their professional assistance in choosing & receiving in
time to use this past weekend.
It's been a pleasure doing business with your team & e-trailer & will
recommend to many.



by:

Package arrived on time. The hitch installation was easy it looks good on the car, however in order to install the hitch the factory tow bracket had to be removed.



by:

Hitch was bent when taken out of the box; no visible damage to the box so it came that way from the factory. The mechanic had to bend it back to get it to fit.



by:
2013 Nissan Murano

Received the hitch on time for our 2013 Murano. My initial concern was if I could install the hitch without lowering the muffler system. My concern was unwarranted. I was able to install the hitch by myself and it only took me approx 1 hour. I located the hitch in place and blocked it in the install position so i could bolt it up with my hands free.
I would recommend the product and company to anyone

Charlie

6/3/2015

The hitch is used for our bike rack and we have had not problem. It was a good purchase



by:

As always, hitches from Etrailer are top notch. Fit was spot on. Rack came fast, too! Just skip the hassle and get your stuff from Etrailer!

Tim

6/24/2022

Great! Fit is awesome!



by:
2011 Nissan Murano

Love this hitch. Had if for a year and never had a problem with it. Installed it on my 2011 Nissan



by:
Nissan Murano

Great product and service. Easy to install. Took an hour by myself with a floor jack, and I did NOT need to lower the exhaust! If I had a second one to install I could probably do it in about 20 minutes after having done one install now. Wish I had a Curt on my vehicle but my wifes Murano looks great!

Don P.

6/17/2016

Great purchase, looks great and towscarries wonderfully. If in need of another in the future you all will be where I buy it from.



by:

Everything was a perfect fit



by:
2010 Nissan Murano

This product was as easy to install as advertised. I did try cleaning out the crud in the bolts as suggested but didn't have much luck (8 years of crud had collected). I had seen in an online video how someone used a tap to clean out the nut threads. I did this and it worked like a charm. Aside from the trip to the hardware store to get the proper size tap (12 - 1.25) it took about 30 minutes to install. As suggested in a video I also used a tie-down strap to help support the exhaust after removing it from the hangers (another tip spray these with WD-40 to aid in the removal).

Etrailer Expert

Mike L.

6/26/2018

Any vehicle that has more than 2 or 3 years driven in a northern climate will have crud and corrosion built up in the hitch attachment nuts welded into the vehicle frame. If the dirt/corrosion isnt too bad, a wire brush like # DW00254 and some spray lubricant works really well. For older vehicles a thread tap, like you mentioned could be needed.



by:

It is holding up good. Though we dont use it as much, whenever we use it it works great. We put coolers and luggagges, bikes and other stuff and hasnt fall off. It is a great investment.



by:
2010 Nissan Murano

Electrical install went very well, took about 2 hours. Worked on tow bar for about 3 hours, could not thread bolts in hole. Went to my auto shop, they had to use other bolts, inside hole on passenger side did not line up. Have three of 4 bolts installed. Will return to shop tomorrow to solve hole #4 dilemma.


25
196
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Which Trailer Hitch Receiver Will Fit My 2014 Nissan Murano CrossCabriolet?
    The only trailer hitch receiver that is confirmed to fit your 2014 Nissan Murano CrossCabriolet is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13577. This has a max towing capacity of 4,000lbs and max tongue weight of 400lbs, however, I always recommend looking in your owner's manual to verify your vehicle's towing capacity which you do not want to exceed. I do not believe the receiver comes with any paper work stating that it is suitable for the CrossCabriolet but it...
    view full answer...
  • Measurements for Curt Hitch # 13577 for a 2013 Nissan Murano with Custom Exhaust
    I went out to the warehouse to measure Curt trailer hitch # 13577 for your 2013 Nissan Murano. Side to side between the mounting flanges it is 36 inches. The center to center distance between the rear most bolt holes (on the vehicle) is 38-1/4 inches. The height from the top of the mounting flanges to the top of the receiver is 5-1/8 inches. The bolt holes on the right side are 5 inches apart on center. On the left side the rear-most and center holes are 5 inches apart on center. And...
    view full answer...
    Image 1 for
  • Trailer Hitch for 2014 Nissan Murano Cross Cabriolet for Use with Hitch Bike Rack
    For the 2014 Nissan Murano Cross Cabriolet convertible we do have a hitch option from Curt, their 2-inch Class III model # 13577 and another option from etrailer # e65AR. These hitches come with all required mounting hardware and is a no-drill installation. A hitch installation article for each hitch is linked to help you with the install. With either hitch installed you can use a 2-inch hanging or platform bike rack of up to 5-bike capacity, thanks the to hitch's substantial 400-lb tongue...
    view full answer...
  • What Causes Tire Cupping on a Trailer Tires
    That's tire cupping. When you have cupping wear on a tire it is from the tire bouncing on the road. You will want to check the air pressure in the tire and make sure you are running the maximum air pressure that is indicated on the tire. Then, I would recommend to have the tires and wheels balanced. Another thing to check is the suspension parts on the trailer. When suspension parts begin to wear and get loose it can cause the tire to hop when being towed and cause the cupping pattern.
    view full answer...
    Image 1 for
  • Bolts Will Not Thread for Curt Trailer Hitch 13577 on 2013 Nissan Murano
    If you are using the correct bold, then the method I recommend to clean the weld nuts is with a wire brush part # 814092 and spray lube. In order for the method to work you will need to let the lube soak for around an hour and then vigorously clean with the brush. If this still does not work then you can use a 12 mm X 1.25 tap. You need to be extremely careful when doing so as you can cross-thread the weld nuts rather easily. Let me know if this does not work.
    view full answer...
    Image 1 for
  • Fit of Curt Class III Hitch 13577 on 2014 Nissan Murano Cross Cabriolet
    We set up our FitGuide to include all versions of a vehicle, so the same item - a hitch in your case - will be listed twice, for each application it fits. But if you select the CrossCabriolet from the drop-down menu tool at the top of the linked page you will note that the only item that appears is the compatible Curt Class III hitch # 13577. This 2-inch hitch installs without drilling as shown in the linked video.
    view full answer...
  • Does Curt Hitch for 2014 Nissan Murano Come with Wiring and Can it be Installed Without a Lift
    Great questions! The Curt Trailer Hitch Receiver # 13577 just comes with the hitch itself. To add the corresponding wiring for your 2014 Nissan Murano SL you'll need the Curt # 55571 as well. I have attached installation videos for each that you can check out. As far as installing it without a lift goes, I sifted through the reviews on this hitch and it seems like other people were able to install it fairly easily without using a lift; some people even said they didn't need to lower the...
    view full answer...
    Image 1 for
  • Bike Carrying Options for 2014 Nissan Murano Cross Cabriolet
    You'll need to use a hitch mounted bike rack, as there aren't any trunk mount bike racks that are compatible with your Murano. For a hitch, I'd recommend the Curt Class III hitch, part # 13577. For a bike rack, Swagman offers the reasonably priced yet well equipped Trailhead which is available in a 2 bike model # S63360, 3 bike model # S63365 or 4 bike model, as part # S63380. The racks include an anti rattle hitch bolt, but I'd recommend adding a locking hitch bolt/cable lock combo part...
    view full answer...
  • Trailer Hitch And Bike Rack Recommendation For 2014 Nissan Murano Crosscabriolet
    In order to have a bike carrier on your 2014 Crosscabriolet, you will need to use a trailer hitch mounted carrier. There are no trunk-mount racks confirmed to fit due to the way the back of the vehicle is made. I recommend the Curt Trailer Hitch Receiver, part # 13577. This is a Class lll hitch and it has a 2 inch receiver opening. When installing the hitch the tie-down hook will need to be removed. The carrier I recommend is the Thule Camber 2 Bike Rack, part # TH9058. This bike rack...
    view full answer...
  • Recommended Solutions to Carry Bikes on a 2010 Nissan Murano
    Does your Murano have a hitch or any type of roof rack? If it has a roof rack, is it just the rails that run front to back or does it also have the crossbars that run from passenger to driver side?
    view full answer...
  • Trailer Hitch Receiver Options for a 2011 Nissan Murano CrossCabriolet
    I do have an option for you but I spoke to my contact at Draw-Tite and they stated that they do not have a hitch confirmed to fit the CrossCabriolet edition of a 2011 Nissan Murano due to the rear bumper difference between the standard and CrossCabriolet editions. Draw-Tite bought Hidden Hitch years ago and the brand has since been discontinued. The Draw-Tite and Hidden Hitch receiver will be the same. The only trailer hitch receiver we have confirmed as a fit for your vehicle is the...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2011 Nissan Murano
    Starting with the trailer hitch for your 2011 Nissan Murano, the Curt Class III Round Tube Receiver Hitch # 13577 referenced in your question is confirmed to fit this vehicle and is a great choice. This will provide a 2 inch receiver with a towing capacity of 4,000 pounds. I have attached an installation video on your Murano that you can use for reference. As you mentioned, both the Tekonsha T-One Vehicle Wiring Harness # 118653 and the Curt T-Connector # 55571 are confirmed to fit your...
    view full answer...
  • Is a Hitch Installation Video Available for the 2010 Nissan Murano
    We do have a video showing the installation of the Curt Trailer Hitch # 13577 on a 2010 Nissan Murano, you can use the provided link to view it. If you'll use the hitch for towing purposes, you may want to consider the following parts to complete your towing setup: Wiring # 118653 Drawbar # C45030 Hitch Ball # 19260 for 1-7/8 inch or # 63845 for a 2 inch Hitch Lock Kit # e99039
    view full answer...
  • Trailer Hitch Comparison for a 2010 Nissan Murano
    The etrailer and Curt hitches are manufactured by two separate companies. Either hitch is equivalent in quality, installation procedures, and capacity. Really the primary difference between them is cosmetic. The etrailer # e65AR hitch has a matte black powder coat finish and the Curt # 13577 has a shiny powder coat finish. Most folks find the round tubes of these hitches to be very pleasing to the eye. Functionally speaking either hitch would work great for you. The etrailer hitch is...
    view full answer...
  • Does Curt Hitch # 13577 Fit 2010 Nissan Murano with Aero Kit
    I checked with Curt just now and they have their hitch # 13577 as a confirmed fit for all models of the 2010 Nissan Murano so this hitch will fit yours with the factory Aero package. We haven't had the chance to install it on an Aero package vehicle, but we still know it will fit. I attached a picture that shows the trimming a customer had to do to their Aero bumper though. I attached an install video for this as well. If you needed trailer wiring as well you'd want # 118653 which is a...
    view full answer...
    Image 1 for
  • Is There a Wiring Harness That Will Work With My 2014 Nissan Murano CrossCabriolet?
    You are correct, the Curt Hitch # 13577 is a fit for your 2014 Nissan Murano CrossCabriolet and the installation is relatively simple. And, we do have a wiring harness that will work for your vehicle, but it will have to be hard-wired. Don't let that scare you, we have detailed instructions and a video of the installation on a Nissan. A popular wiring kit for the CrossCabriolet is Curt # C56496. I would also recommend purchasing Dielectric Grease, # 11755, for the electrical connectors...
    view full answer...
  • Trailer Hitch Option for 2011 Nissan Murano Crosscabriolet
    We do offer one 2-inch hitch option confirmed to fit your 2011 Nissan Murano Crosscabriolet, part # 13577 from Curt. This Class III hitch is a no-drill installation and the process is shown in the linked video. Written instructions are included too. I linked a photo that shows you the appearance of the hitch and car after installation. The hitch's round cross tube will be visible under the bumper cover. If you plan to do some towing you will need a wiring harness # C59236 to send stop/turn/tail...
    view full answer...
    Image 1 for
  • Where are the Torque Specs for Installing Curt Trailer Hitch 13577 on a 2009 Nissan Murano
    The torque specifications for trailer hitch # 13577 can be found in step 5 of the instructions which I have linked for you. I have also included a link to a video showing a typical installation on a 2009 Nissan Murano. Our installers always say to torque the hardware as specified in the instructions. This is because should the manufacture change the torque specs, the instructions will be up to date.
    view full answer...
  • Recommended Trailer Hitch for 2011 Nissan Murano CrossCabriolet
    Yes, the Curt Trailer Hitch Receiver, # 13577 is a Class III hitch that is confirmed to fit the 2011 Nissan Murano CrossCabriolet. This is a fully welded trailer hitch receiver bolts onto your Nissan Murano's frame with no welding required. It has a receiver opening of 2" x 2. If you will be using this for light towing and not just hitch accessories such as a bike rack or cargo carrier, you will need the Curt 4-Pole Flat harness, # C59496 and the etrailer Ball Mount Kit, # 989900.
    view full answer...
  • Availability of Hitch for 2011 Nissan Murano That Does Not Require Removal of Rear Fascia Panel
    All of the 2-inch Class III hitches offered for your 2011 Nissan Murano will use the same frame mounting points for installation, but the version of the vehicle will determine which hitches are suitable. Installation procedures can vary slightly depending on whether or not you have the Cross Cabriolet version. The link provided has a drop-down menu to let you choose which version Murano you have and to see the hitch options that fit. Curt hitch # 13577 fits both versions and requires...
    view full answer...
  • Trailer Hitch Recommendation for 2011 Nissan Murano CrossCabriolet Convertible
    For the 2011 Nissan Murano Cross Cabriolet convertible we do have a hitch option from Curt, their 2-inch Class III model # 13577. This will work great with your bike rack as long as it is designed for 2 inch hitches. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well.
    view full answer...
  • Recommended Ball Mount for 2010 Nissan Murano
    The Curt Trailer Hitch Receiver part # 13577 or the etrailer Trailer Hitch Receiver part # e65AR for that matter while installed on a 2010 Nissan Murano measures around 14-3/4" from the ground to the top inside edge of the receiver tube opening. If the distance from the ground to the bottom of the trailer coupler is 18-3/4" while level then you will need a ball mount with a 4" rise. The Curt Ball Mount for 2" Hitches part # C45070 will work but you also need to add the Pin and Clip For...
    view full answer...
  • Recommended 2-Inch Class III Hitch for 2001 Toyota Highlander
    The Curt Class III hitch # 13577 is a custom fit specifically made for versions of the Nissan Murano for model years 2009 through 2014. This hitch does NOT fit any model year of the Toyota Highlander. For a similar 2-inch Class III hitch designed for your 2001 Toyota Highlander I recommend the Draw-Tite # 41541. This hitch offers no-drill installation which is detailed in the linked video that shows a 2003 Highlander. If you also need a trailer wiring harness you can use the Tekonsha 4-Pole...
    view full answer...
  • Bike Rack for Nissan Murano Cross Cabriolet Convertible
    You are correct that you will need a hitch-mounted bike rack with your 2011 Nissan Murano Cross Cabriolet. The only hitch that is a confirmed fit is the Curt # 13577, a Class III hitch that bolts on; I've added a link to a video of an install of this hitch for you to take a look at. With a bike rack, you have a couple of options - a platform rack and a hanging rack. For a platform rack I recommend checking out the Swagman XTC # S64670. It is a wheel mount design that uses padded ratcheting...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.