Are Trailer Spring Seats Needed for Square Axles with Leaf Springs?
Question:
Im replacing my square boat trailer axle.the one i have know has no spring seats it sits right on the leaf springs.i noticed most square axle fully assemble axles which i want has spring seats.this is a tandem axle trailer.im not replacing the other axle.if i have one axle with no spring seats and one axle with spring seats would that screw up the way the trailer rolls? Or sit to high or uneven?also can i cut the spring seats off or do you sell a square axle.minus the spring seats?
asked by: Dan
Expert Reply:
Square axles normally don't have spring seats like a round axle but do have a hole for the leaf spring bolt to fit into. Take a look at the CE SMITH # CE33201GA-HUB for a visual. The U-bolt mounting kits will have a hole in the center for the other side of that leaf spring bolt to keep everything in line. If you have a 1-1/2 inch square axle use # CE23102. If you have a 2 inch axle use # CE23103.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 2000 lbs
- Square Axle - 1-1/2 Inch
- 3/8 Inch Diameter
- 3-3/8 Inch Long
- CE Smith
more information >
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 1/2 Inch Diameter
- 4-1/2 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Universal Group
more information >
Continue Researching
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 2,000 lbs - E-Z Lube
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Search Results: disc brake actuator
- Q&A: How to Determine Correct Leaf Spring Size on 6 X 12 Utility Trailer
- Search Results: springs
- Article: Where to Position the Trailer Axle?
- Search Results: hanger kit
- Q&A: Can Round U-Bolts Be Used On a Square Axle Tube?
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Replacement Shackle Link - DX55FR
- Article: Trailer Tire Sizing
- Video: Review of Kodiak Replacement Caliper-Mounting Bracket - KCMB82BD
- Search Results: leaf springs
- Video: Dexter Trailer Suspension Kit Replacement Shackle Link with Bolts Review
- Search Results: weight distribution hitch
- Search Results: tandem axle kit
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Axle Mounting Hardware for Square Axle
- Q&A: How to Pick Leaf Springs for a Trailer
- Video: Review of Powerbuilt Lubricants Sealants Adhesives - Greasing Tools - ALL647646
- Search Results: spring seats
- Q&A: How to Determine Compatible Replacement Trailer Hubs
- Article: How to Raise Your Travel Trailer Height
- Q&A: How To Flip Square Trailer Axle For Ground Clearance
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8758721